Westone Audio Pro X10 IEM Earphones – Single Driver Noise Isolating-Complete Features/Instruction Guide

Westone Audio Pro X10 IEM Earphones – Single Driver Noise Isolating

Specifications

• BRAND : Westone Audio
• CONNECTIVITY TECHNOLOGY : Wired
• FORM FACTOR : In-Ear
• PRODUCT DIMENSIONS: 7.13 x 5.04 x 2.99 inches
• ITEM WEIGHT: 12 ounces
• SENSITIVITY: 114 dB @ ImW
• FREQ. RESPONSE: 20Hz – 16kHz
• IMPEDANCE: 19 ohms
• DRIVER: Single, Balanced Armature, Full Range

Introduction

A universal-fit earpiece that is tiny, low-profile, lightweight, and exceptionally pleasant is the result of 60 years of experience building goods for the ear. Our custom EarTips improve the Pro X10’s performance by guaranteeing a fantastic fit and seal right out of the box. Westone Audio’s innovative balanced-armature drivers deliver more acoustic detail and a wider frequency range than competing in-ear headphones. It has High-strength, ultra- low resistance tensile wire made of aramid fiber, with the industry’s most advanced MMCX connection. The left and right earpiece responses are identical within a +/- 2dB tolerance. This goes well beyond traditional in-ear solutions.

WHAT’S IN THE BOX

• IN-EAR MONITORS
   Pro X10 Universal-Fit In-Ear Musician’s Monitors

• CABLE
   Linum Bax T2 Detachable Cable

• ACCESSORIES
  Impact Resistant Monitor Vault

• TIPS
  5 Pair Foam+ 5 Pair Silicone

HOW TO MAKE EM SOUND BETTER

• Keep a close eye on the volume. Listening to your IEMs at high volumes is not only dangerous for your ears, but it can also harm the drivers within your earphones.
• Use a Shirt Clip
• Safely Store Your IEMs
• Wick Away Moisture
• Clean After Each Use.

HOW TO CLEAN

To begin cleaning the IEMs, use a soft cloth or microfiber rag and a little rubbing alcohol to wipe down the outside of the parts. Any wax or grime on the shell will be broken up and cleaned by the alcohol, which will also assist to evaporate any excess moisture on the IEM. Remove the cable and clean the sockets on a regular basis.

HOW TO CONNECT

Connect the cord to the correct earphone c. Push the cord directly into the earphone’s socket to secure it. 3rd section: Connect your device 1. Press and hold the power button for a total of 5 seconds. To signal that the pairing procedure has begun, the indicator light next to the power button will begin flashing red and blue.

Frequently Asked Questions

• Is it possible to listen to music with IEM?
  The sound quality of IEMs is among the best available. The audio is crystal clear, allowing you to hear every nuance of the music. Even at low volumes, the bass is improved and the sound quality remains consistent.

• Is it true that Westone IEMs are good?
  They’re regarded as one of the greatest manufacturers of in-ear monitoring equipment for musicians, as well as professional hearing protection and in-ear devices for the military. Westone, on the other hand, provides some fantastic earbuds for audiophiles and everyday music listening.

• What is the average lifespan of an IEM?
  If you want your IEMs to last, acquire a pair with a detachable cord because that’s what goes wrong 99 percent of the time. If you treat them well, 1-2 years of daily use looks about right, whereas 3 years is addressed with caution.

• When should IEMs be used?
  Musicians, audio engineers, and audiophiles use in-ear monitors (IEMs) to listen to music or hear a personal mix of voices and stage instrumentation for live performance or recording studio mixing.

• Do IEMs require an amplifier?
  Most in-ear headphones or earphones are extremely efficient, so they can be used with smartphones or other portable devices without the use of an amplifier. When utilizing noise-canceling headphones, you don’t need a headphone amp because they already have one built-in.

• Is it possible to use IEMs as regular earbuds?
  Using an IEM as your daily audio-listening device has a number of advantages. Even if you’re simply a casual listener, the difference in audio quality between a conventional pair of earbuds and an in-ear monitor is likely to be noticeable.

• Is it possible for IEMs to cause hearing loss?
  On the other hand, if IEMs are utilized incorrectly, they can cause hearing issues. Some of these devices can deliver sounds that are close or equal to 130 decibels SPL inside the ear canal. Misuse of IEMs on a regular basis might cause temporary or permanent harm to the auditory system’s sensory cells.

• Is it possible to have wireless IEMs?
  These are without a doubt the best-sounding true wireless IEMs on the market. The Sennheiser’s major flaw is that they are overpriced for what you get. Yes, they sound amazing, however, the Sony WF-1000XM3 ($228) above sounds virtually as good at a far lower price.

• Is it safe to use IEMs?
  Because of their close closeness to the eardrums, it’s a widely held belief that IEMs are dangerous. Remember that hearing loss is caused by high SPL, not simply by being close to the audio source. IEMs, on the other hand, are the safest alternative for your ears if you follow these guidelines.

• What criteria do you use to determine which ear to utilize?
  Starting with your smallest finger, carefully insert your fingers into your ears. Continue with the next finger on each hand until a good seal is achieved and outside noise is muffled. Then try to match that finger’s size to one of the ear tip sizes supplied.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>