POWEROWL ZN825E-AA2800-AAA1000 Rechargeable Batteries Charger User Manual
- June 5, 2024
- POWEROWL
Table of Contents
POWEROWL ZN825E-AA2800-AAA1000
Rechargeable Batteries Charger
User Manual
[email protected]
Warranty card included
Dear Customer
Hello, thank you very much for choosing POWEROWL products, In order to use and
maintain the battery correctly, please read this manual in detail.
If you receive a product that is abnormal, please contact us immediately
instead of leaving a bad review.
Negative reviews cannot solve the problem, but we can solve the problem for
you.
Thank you for your understanding.
Parameter Description:
Model: FY1601
Input: 100V-220V AC 50 / 60Hz
Output: DC 1.4V 200mA AA 1.4V 150mA AAA
Applicable battery type: AAA AA NiMH NiCD rechargeable batteries
Dimensions: 6.6 x 6.6 x 9 inches
Weight: 339g (12 oz)
Full Loaded Power Consumption: 11W MAX
Operational Environment: Temp: 0-35 ℃ Humidity: ≤95％
Storage Environment: Temp: -25~+60℃ Humidity: ≤85％
Features
-
Suitable for 1-16 pcs AA AAA NiMH/NiCD rechargeable batteries.
-
Micro USB input, USB cable is included.
-
Over-heat, over-current, over-voltage, short-circuited protection and defective battery detection, AA AAA batteries charger uses trickle charge to extend battery life and charge up to 99%.
-
Advanced IC/ -Delta-V control function.
-
LED indicates individual charging status:
Charging — stay red;
Fully Charged— stay green;
Defective batteries or insert in wrong ways — red – blinking. -
LED indicators can be used to test each slot of the charger:
Connect the charger with electricity (without batteries in it), if LED is green, it means normal; if the LED is red, it means this slot is defective ( cannot charge batteries anymore, but not dangerous). -
Smart indicator lights:
-Light red: the batteries are charging.
-Light green: the batteries are fully charged -
This charger to individually charge each battery , Charge any number of AA AAA rechargeable batteries to make your charging easier. This function shortens the charging time by 5% compared to the chargers without such function:
Operating Instructions:
- Insert 1 or 16 pcs AAVAAA NiMH/NiCD rechargeable batteries into the charger. Pay attention to the polarity marks“+”and“-”.
- Connected the USB cable with the micro socket.
- Remove batteries and unplug the charger after charging.
Cautions:
- Batteries which are broken by the skin are not allowed to be charged.
- It is limited to charge for DC 1.2V Ni-MH or Ni-CD rechargeable batteries, do not use it to charge other types batteries like alkaline batteries.
- Please ensure the battery installed is correct: make the +/- pole of the battery is match for the +/- pole of the charger, or a slight electric shock may occur.
- This charger is for indoor charging and do not expose it to rain or snow. And it should be used between 0″C-35″C.
- Do not decompose, assemble or process the charger.
- Do not drop the charger on the ground or place the weight on it.
- Children must be supervised by adults using this charger.
- Using environment: 0 ℃ -35 ℃ , it is normal phenomenon that the battery is warmer than room temperature when charging.
- Do not make or store the charger in direct sunlight, hot equipment or other hot places.
- During charging, do not cover the charger with items such as towels or clothing. Avoid causing a fire.
- When the charger is not used, power off the external power supply ，and remove the battery from the charger so as not to cause battery loss
- After more than one week’s storage,the rechargeable battery will lose parts of charge automatically.So, please Run out the remaining power before next charging.
Warranty Card
Dear Customer:
Hello, if you encounter any problems with our products,
please contact us at the first time,
Email: [email protected],
thank you
| Model: | Purchase date: |
|---|---|
| User: | Buyer |
| Name: | Name and address: |
| Address: | |
| Telephone: |
THANK YOU FOR CHOOSING
POWEROWL service team is online 24 hours