scheppach NTS16 Wet and Dry Vacuum Cleaner Instruction Manual

NTS16 Wet and Dry Vacuum Cleaner
Instruction Manual

Art. Nr. 5907722901
Ausgabe. Nr. 5907722850
Rev. Nr. 15/10/2020
CAUTION!: Read the manual carefully before operating this machine!
![scheppach NTS16 Wet and Dry Vacuum Cleaner

• Overview 2](https://manuals.plus/wp-content/uploads/2022/06/scheppach-NTS16 -Wet-and-Dry-Vacuum-Cleaner-Overview-2.png)

| Warning! Danger to life, risk of injury, or damage to the tool is possible by ignoring it!.
---|---
| Before commissioning the device, read and understand the operating manual completely.
| Protection class II: This wet/dry vacuum is double-insulated and need not be connected to an earthed mains outlet

Introduction

Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschinen
GmbH Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
We hope your new tool brings you much enjoyment and success.
Note:
According to the applicable product liability laws, the manufacturer of the device does not assume liability for damages to the product or damages caused by the product that occurs due to:

• Improper handling,
• Non-compliance with the operating instructions,
• Repairs by third parties, not by authorized service technicians,
• Installation and replacement of non-original spare parts,
• Application other than specified,
• A breakdown of the electrical system that occurs due to the non-compliance of the electric regulations and VDE regulations 0100, DIN 57113 / VDE0113.

We recommend:
Reading through the complete text in the operating instructions before installing and commissioning the device.
The operating instructions are intended to help the user to become familiar with the machine and take advantage of its application possibilities in accordance with the recommendations.
The operating instructions contain important information on how to operate the machine safely, professionally, and economically, how to avoid danger, and costly repairs, reduce downtimes, and how increase the reliability and service life of the machine.
In addition to the safety regulations in the operating instructions, you have to meet the applicable regulations that apply to the operation of the machine in your country.
Keep the operating instructions package with the machine at all times and store it in a plastic cover to protect it from dirt and moisture. Read the instruction manual each time before operating the machine and carefully follow its information. The machine can only be operated by persons who were instructed concerning the operation of the machine and who are informed about the associated dangers. The minimum age requirement must be complied with.
In addition to the safety requirements in these operating instructions and your country’s applicable regulations, you should observe the generally recognized technical rules concerning the operation of woodworking machines.
We accept no liability for damage or accidents which arise due to the non- observance of these instructions and the safety information.

Device description (Fig. 1-3)

1. Handle
2. Machine head
3. Connection cable
4. Locking hooks
5. Castors (4x)
6. Container
7. Suction connection
8. On/off switch
9. Top cable holder| 10. Connection for blower function
11. Filter basket with safety float valve
12. Suction hose
13. Foam filter
14. Paper filter bag
15. Floor nozzle
16. Joint nozzle
17. Plastic extension tube (3x)
---|---

Scope of delivery

• Open the packaging and remove the device carefully.
• Remove the packaging material as well as the packaging and transport bracing (if available).
• Check that the delivery is complete.
• Check the device and accessory parts for transport damage.
• If possible, store the packaging until the warranty period has expired.

ATTENTION!
The device and packaging materials are not toys! Children must not be allowed to play with plastic bags, film, and small parts! There is a risk of swallowing and suffocation!
1x Wet/dry vacuum cleaner
1x Suction hose
1x Foam filter
1x Paper filter bag
4x Castors
1x Floor nozzle
1x Joint nozzle
3x Plastic extension tube
1x Operating manual

Proper use

The wet and dry vacuum cleaner is designed for wet and dry vacuuming using the appropriate filter. The appliance is not suitable for vacuuming combustible, explosive, or harmful substances.
The equipment is to be used only for its prescribed purpose. Any other use is deemed to be a case of misuse. The user/operator and not the manufacturer will be liable for any damage or injuries of any kind caused as a result of this.
Please note that our equipment has not been designed for use in commercial, trade, or industrial applications. Our warranty will be voided if the equipment is used in commercial, trade, or industrial businesses or for equivalent purposes.

Safety instructions

DANGER!

• The appliance may only be connected to an alternating current. The voltage must correspond with the type plate on the appliance.
• Never touch the mains plug and the socket with wet hands.
• Do not pull the plug from the socket by pulling on the connecting cable.
• Check the power cord with the main plug for damage before every use. To avoid risks, arrange immediately the exchange by authorized customer service or a skilled electrician if the power cord is damaged.
• To avoid accidents due to electrical faults we recommend the use of sockets with a line-side current-limiting circuit breaker (max. 30 mA nominal tripping current).
• Turn off the appliance and remove the main plug prior to any care and maintenance work.
• Repair works may only be performed by the authorized customer service.

WARNING!

• This appliance is not intended for use by persons with limited physical, sensory or mental capacities or lacking experience and/or skills unless such persons are accompanied and supervised by a person in charge of their safety or they have received precise instructions on the use of this appliance and have understood the resulting risks.
• Children may only use this appliance if they are over the age of 8 and supervised by a person in charge of their safety, or if they have received instructions on the use of this appliance and have understood the resulting risks.
• Children must not play with this appliance.
• Supervise children to prevent them from playing with the appliance.
• Children must not perform cleaning and user maintenance without supervision.
• Keep packaging film away from children – the risk of suffocation!
• Switch the appliance off after every use and prior to every cleaning/maintenance procedure.
• Risk of fire. Do not vacuum up any burning or glowing objects.
• The appliance may not be used in areas where a risk of explosion is present.
• Immediately switch the appliance off or pull the power plug if foam forms or liquids escape!
• Do not use abrasives, glass, or universal cleaners! Never immerse the appliance in water.

Certain materials may produce explosive vapors or mixtures when agitated by the suction air! Never vacuum up the following materials:

• Explosive or combustible gases, liquids, and dust particles (reactive dust particles)
• Reactive metal dust particles (such as aluminum, magnesium, and zinc) in combination with highly alkaline or acidic detergents
• Undiluted, strong acids and alkalies
• Organic solvents (such as petrol, paint thinners, acetone, and heating oil).

In addition, these substances may cause the appliance materials to corrode.
WARNING!
This electric tool generates an electromagnetic field during operation. This field can impair active or passive medical implants under certain conditions. In order to prevent the risk of serious or deadly injuries, we recommend that persons with medical implants consult with their physician and the manufacturer of the medical implant prior to operating the electric tool.

Technical Data

Installation

IMPORTANT!
Prior to use, ensure that the device has been correctly and fully assembled.
Unpacking (fig. 1, 2, 3)

1. Release the locking hooks (4) and remove the machine head (2). The accessories are located inside the container (6). Only the plastic extension tubes (3x) are located outside the container (6), in the packaging. Remove all of the accessories from the container (6).

Installing the castors (fig. 4)

1. Press the four castors (5) into the holes in the castor mounts.

Installing the machine head (2) (fig. 5)

1. Place the machine head (2) on the container (6). Secure the machine head (2) with the locking hooks (4). When installing the machine head (2), ensure that the locking hooks (4) latch into place correctly.

Installing the foam filter (13) (fig. 6)
Never use the device without a filter! Always ensure that the filters are correctly fitted!
Installing the foam filter (13): For wet vacuuming, slide the foam filter (13) provided over the filter basket with a safety float valve (11).
Installing the paper filter bag (14) (fig. 7)
It is recommended to use an additional paper filter bag (14) when vacuuming fine, dry dirt. Slide the paper filter bag (14) over the suction opening in the container (7). The paper filter bag (14) is only suitable for dry vacuuming. The paper filter bag (14) makes it easier to dispose of the dust collected.
Installing the suction hose (fig. 8, 9)
Connect the suction hose (12) to the corresponding port, depending on the desired use, on the wet and dry vacuum. Vacuuming: Connect the suction hose (12) to the suction hose port (7). To do so, slide the end of the suction hose (12) into the suction hose port (7). Make sure the plug-in fitting on the end of the suction hose (12) latches into the recess on the suction hose connection (7). In the end, position, and turn the suction hose (12) in a clockwise direction.
Blowing:
Connect the suction hose (12) to the suction hose port (10). Make sure the plug-in fitting on the end of the suction hose (12) latches into the recess on the connection with the blast function (10). In the end, position, and turn the suction hose (12) in a clockwise direction.
Installing the plastic extension tubes, suction hose and floor nozzle (fig. 10)
Assemble the plastic extension tubes (17) by pushing them together. Connect the assembled plastic extension tubes with the bent end of the suction hose (12). Fit the floor nozzle (15) or joint nozzle (16) to the other end of the assembled plastic extension tubes.

Operation

WARNING!
Switch the device off if liquid or foam emerges with the exhaust air during wet vacuuming.
Switching on/off (fig. 1)
Press the on/off switch (8):

• Switch setting 0: Off
• Switch setting I: On

Dry vacuuming
Use the paper filter bag (14) for dry vacuuming.
Wet-vacuuming
Use the foam filter (13) for wet vacuuming. Ensure that the foam filter (13) is correctly fitted.
If the container (6) is full, the safety float valve (11) closes the suction port, and suction operation is interrupted.
IMPORTANT!
The device is not suitable for vacuuming flammable liquids. For wet vacuuming, use the only the foam filter (14) provided. To remove the liquid vacuumed up from the container, take off the machine head (2) by releasing the locking hooks (4) from the container (6). Pour out the liquid residue.

Maintenance and cleaning

WARNING!
Prior to any adjustment, maintenance, or service work disconnect the mains power plug!
Cleaning
It is recommended to clean the device after each use. Do not spray the device with water or clean it under running water. This can result in electric shocks and can damage the device.
The residual liquid remains in the container (6). To remove residual liquid, take off the machine head (2) by releasing the locking hooks (4) from the container (6). Pour out the liquid residue. Clean the container with a damp cloth.

• Replace the paper filter bag when full
• Always keep the device clean. Do not use cleaning agents or solvents.
• Keep the ventilation slots clean and free of dirt and dust.
• Clean the device only with a soft brush or a damp cloth.
• Clean the foam filter (13) with a little soap and running water and then leave it to air dry.

Maintenance
The device is maintenance-free.
Service information
Please note that the following parts of this product are subject to normal or natural wear and that the following parts are therefore also required for use as consumables.
Wear parts: Foam filter, Paper filter bag,

• Not necessarily included in the scope of delivery!

Storage

Store the device and its accessories in a dark, dry, and frost-proof place that is inaccessible to children. The optimum storage temperature is between 5 and 30˚C.
Store the electrical tool in its original packaging. Cover the electrical tool in order to protect it from dust and moisture.
Store the operating manual with the electrical tool.
Storage (fig. 1, 11)

• Wind the connection cable (3) around the machine head (2) and lay it in the top cable holder (9).
• The remaining accessories can be stored in the stainless steel container (6).

Electrical connection

The electrical motor installed is connected and ready for operation. The connection complies with the applicable VDE and DIN provisions.
The customer‘s mains connection, as well as the extension cable used, must also comply with these regulations.
Important information
In the event of overloading the motor will switch itself off. After a cool- down period (time varies) the motor can be switched back on again.
Damaged electrical connection cable
The insulation on electrical connection cables is often damaged.
This may have the following causes:

• Passage points, where connection cables are passed through windows or doors.
• Kinks where the connection cable has been improperly fastened or routed.
• Places where the connection cables have been cut due to being driven over.
• Insulation damage due to being ripped out of the wall outlet.
• Cracks due to the insulation aging.

Such damaged electrical connection cables must not be used and are life- threatening due to the insulation damage.
Check the electrical connection cables for damage regularly. Make sure that the connection cable does not hang on the power network during the inspection.
Electrical connection cables must comply with the applicable VDE and DIN provisions. Only use connection cables with the marking „H05VV-F“.
The printing of the type designation on the connection cable is mandatory.
AC motor

• The mains voltage must be 230 V~
• Extension cables up to 25 m long must have a cross-section of 1.5 mm 2.

Connections and repairs of electrical equipment may only be carried out by an electrician.

Disposal and recycling

The equipment is supplied in packaging to prevent it from being damaged in transit. The raw materials in this packaging can be reused or recycled. The equipment and its accessories are made of various types of material, such as metal and plastic. Defective components must be disposed of as special waste. Ask your dealer or your local council.
Old devices must not be disposed of with household waste!
This symbol indicates that this product must not be disposed of together with domestic waste in compliance with the Directive (2012/19/EU) pertaining to waste electrical and electronic equipment (WEEE). This product must be disposed of at a designated collection point. This can occur, for example, by handing it in at an authorized collecting point for the recycling of waste electrical and electronic equipment.
Improper handling of waste equipment may have negative consequences for the environment and human health due to potentially hazardous substances that are often contained in electrical and electronic equipment. By properly disposing of this product, you are also contributing to the effective use of natural resources.
You can obtain information on collection points for waste equipment from your municipal administration, public waste disposal authority, an authorized body for the disposal of waste electrical and electronic equipment, or your waste disposal company.

Troubleshooting

plug back into the socket.
Check whether there is the power to the socket.| Call an electrician.
Check whether the vacuum cleaner is on/off and the switch is switched on.| Switch the on/off switch on.
Reduced vacuuming power| Is the brush blocked?| Switch the vacuum cleaner off to remove the blockages.
Is the dust bag full of dust?| Remove and empty the dust bag.
Is the filter full of dust?| Remove and empty the filter.

CE – Declaration of Conformity
Hereby declares the following conformity under the EU Directive and standards for the following article
Brand:
Article name: | Scheppach
WET AND DRY VACUUM CLEANER – NTS16-5907722901
---|---
2014/29/EU| 2004/22/EC| 2000/14/EC_2005/88/EC
X 2014/35/EU| 2014/68/EU| Annex V
X 2014/30/EU| X 2011/65/EU*| Annex VI
Noise: measured LWA= xx dB(A); guaranteed LWA= xx dB(A) P = xx KW; L/Ø = cm
Notified Body:
Notified Body No.:
2006/42/EC| 89/686/EC_96/58/EC| 2010/26/EC
Annex IV
Notified Body:
Notified Body No.:
Certificate No.:| 90/396/EC| Emission. No:
Standard references:
EN 60335-2-2; EN 60335-1; EN 62233; EN 55014-1; EN 55014-2; EN 61000-3-2; EN 61000-3-3
This declaration of conformity is issued under the sole responsibility of the manufacturer.
The object of the declaration described above fulfills the regulations of the directive 2011/65/EU of the European Parliament and Council from 8th June 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Ichenhausen, den 15.10.2020| Head of Product Management
First CE: 2020
Subject to change without notice| Documents register: Dawid Hudzik
Günzburger Str. 69, D-89335 Ichenhausen

Warranty
Apparent defects must be notified within 8 days from the receipt of the goods. Otherwise, the thebuyerís rights of claim due to such defects are invalidated. We guarantee for our machines case of proper treatment for the time of the statutory warranty period from delivery in such a way that we replace any machine part free of charge which provably becomes unusable due to faulty material or defects of fabrication within such period of time. With respect to parts not manufactured by us, we only warrant insofar as we are entitled to warranty claims against the upstream suppliers. The costs for the installation of the new parts shall be borne by the buyer. The cancellation of the sale or the reduction of the purchase price as well as any other claims for damages shall be excluded.

www.scheppach.com
service@scheppach.com
+(49)-08223-4002-99
+(49)-08223-4002-58

References

• scheppach | scheppach

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>