scheppach Trike S Sweeper Instruction Manual
- June 5, 2024
- Scheppach
Table of Contents
Trike S Sweeper
Instruction Manual
Sweeper
Translation of original instruction manual
| 
---|---
| 
Explanation of the symbols on the equipment
The use of symbols in this manual is intended to draw your attention to
possible risks. The safety symbols and the explanations that accompany them
must be perfectly understood.
The warnings in themselves do not remove the risks and cannot replace correct
actions for preventing accidents.
| Read the operating instructions to reduce the risk of inquiry
---|---
****Attention!| In this operating manual, we have used this sign to mark all
sections that concern your safety.
Introduction
scheppa ch
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER,
we hope your new tool brings you much enjoyment and success.
NOTE:
According to the applicable product liability laws, the manufacturer of the
device does not assume liability for damages to the product or damages caused
by the product that occurs due to:
- Improper handling,
- Non-compliance of the operating instructions,
- Repairs by third parties, not by authorized service technicians,
- Installation and replacement of non-original spare parts,
- Application other than specified.
We recommend:
Read through the complete text in the operatinginstructions before
installing and commissioning the device. If you give the equipment to any
other person, give them these operating instructions as well. The operating
instructions are intended to help the user to become familiar with the machine
and take advantage of its application possibilities in accordance with the
recommendations. The operating instructions contain important information on
how to operate the machine safely, professionally and economically, how to
avoid danger, costly repairs, reduce downtimes and how to increase reliability
and service life of the machine. In addition to the safety regulations in the
operating instructions, you have to meet the applicable regulations that apply
for the operation of the machine in your country. Keep the operating
instructions package with the machine at all times and store it in a plastic
cover to protect it from dirt and moisture. Read the instruction manual each
time before operating the machine and carefully follow its information. The
machine can only be operated by persons who were instructed concerning the
operation of the machine and who are informed about the associated dangers.
The minimum age requirement must be complied with.
Device description
| 1. Handle | 6. Transport wheels |
|---|---|
| 2. Sliding handle | 7. Feeder brushes |
| 3. Mounting screw sliding handle | 8. Belt drive |
| 4. Lower push bar | 9. Sweeping brushes |
| 5. Dirt collecting container |
Scope of delivery
- Feeder brushes
- Sliding handle
- Lower push bar
- Mounting screw sliding handle
- Operation manual
- Enclosed accessories bag
• Flat round screw M8 x 25mm
• Fillister head screw (self-tapping) 4,2 x 15 mm
Intended use
-
The machine is designed and built according to the state-of-the-art and the safety-related standards.
Nevertheless, the use of the machine might involve risks such as personal injury, danger to life for the user or third parties, or damage to the machine and other material property. -
The machine is to be used only in a technically flawless condition as well as in accordance with the manufacturer’s instructions and in a safety and risk-conscious manner while adhering to the operating instructions! In particular, failures which mayimpair the safety must be resolved immediately (by you or an expert)!
-
Sweeping of flat and dry surfaces – e.g. entries, terraces, courtyards, etc.
-
The machine may be operated only with original parts and original accessories of the manufacturer.
-
Any other use above or beyond this is considered improper use. The manufacturer is not liable for damages resulting from this. The user shall bear this risk alone.
-
The safety, work and maintenance instructions of the manufacturer as well as the dimensions indicated in the Technical Data section must be adhered to.
-
The relevant accident prevention regulations and other generally recognised safety standards must be observed.
-
The machine may be used, maintained or repaired only by persons who are familiar with the machine and the risks involved. Unauthorised modifications on the machine exclude any liability of the manufacturer for resulting damages.
Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the equipment is used in commercial, trade or industrial businesses or forequivalent purposes.
Safety information
- Take suitable measures to prevent children from accessing the appliance.
- Immediately replace any faulty components.
- We are not liable for any damage caused as a result of any unauthorised repair and unauthorised handling or use contrary to the use as designated.
Warning: Sweeping of any gel, liquid, combustible, explosive, hot and
unhealthy substances prohibited.
Attention! If metal, glass or sharp objects have been swept, it is
necessary to use firm working gloves when emptying the dirt collecting
container.
Technical data
| Dimensions LxWxH (mm) | 593 x 650 x 1000 |
|---|---|
| Drive | manual |
| Max. working width with side brushes (mm) | 650 |
| ca. Sweeping capacity (m²/h) | 2000 |
| Container content (l) | 22 |
| Weight (kg) | 5,56 |
Unpacking
- After unpacking, check all parts for any transport damage. Inform the supplier immediately of any faults. Later complaints cannot be considered.
- Make sure the delivery is complete.
- Before putting into operation, familiarize yourself with the machine by carefully reading these instructions.
- Use only original scheppach accessories, wearing or replacement parts. You can find replacement parts at your scheppach dealer.
- When ordering, include our item number and the type and year of construction of the machine.
ATTENTION!
The device and packaging materials are not toys!
Children must not be allowed to play with plastic bags, film and small parts!
There Is a risk of swallowing and suffocation!
Attachment
About packaging used requires your machine is not completely assembled.
First, remove the accessories from the collection container and examine it for
completeness. (Fig. 3)
- Mount the feeder brushes to the intended axis and fasten it with 3 screws (b). (Fig. 4)
- Attach the lower part of the push handle to the designated assembly points with the clamping thumbscrew on both sides. Fig. 5
- Attach the upper part of the push handle (2) as shown in Figure 6.
Operation
When the sweeper is moved, the feeder brushes (7) and sweeping brushes (9)
start rotating, helped by the belt drive. Rotating feeder brushes (7) drive
the dirt to the centre. It is then collected by sweeping brush and taken to
the dirt collecting container (5).
Emptying the dirt collecting container
If you want to take out the dirt collecting container to empty it, take it by
its handle and pull up.
Maintenance
Use a wet cloth for plastic parts cleaning. Do not use any cleaning agents,
solvents or sharp objects. After every use – Remove the appliance off dust and
dirt.
If the brush is not rotating it can be that the storage of the brushes is
dirty or the belt isn´t good. Clean and lubricate the bearing of the brush or
replace the belt
Service information
Please note that the following parts of this product are subject to normal or
natural wear and that the following parts are therefore also required for use
as consumables.
Wear parts*: Brushes, drive belts, wheels
- Not necessarily included in the scope of delivery!
Storage
For any longer storage the appliance must be thoroughly cleaned and stored so as unauthorised persons could not access it.
- Empty the dirt collecting container
- Adjust the brushes to relieve them
- Store the appliance when it is dry
To save spaces, the sliding handle can be folded.
Loosen the screws, pull the sliding handle out and fold forward.
Disposal and recycling
The equipment is supplied in packaging to prevent it from being damaged in
transit. The raw materials in this packaging can be reused or recycled. The
equipment and its accessories are made of various types of material, such as
metal and plastic. Defective components must be disposed of as special waste.
Ask your dealer or your local council.
www.scheppach.com
[email protected]
+(49)-08223-4002-99
+(49)-08223-4002-58