Cilico T90 Barcode Scanner User Manual

T90 Barcode Scanner
User Manual

• Bluetooth wireless transmission
• Built-in FLASH memory supports breakpoint resume
• Can store more than 5,000 entries of 50-digit 2D barcode information
• Supports Windows XP/7/8/10 PC and Android, iOS devices

Packing list:
Barcode scanner -> 1 unit
USB cable -> 1 piece.
Quick Start Guide
Certificate of Approval
Setup Card for inventory function
Power Adapter(optional)
Note: The device is not equipped with a charging device.
Please charge the device via USB output charging equipment.

Barcode Scanner Overview

It integrates a high-performance processor and decoding board, it has fast decoding, high-precision reading ability, and high anti-interference ability. It can easily read barcodes on screens, paper, goods, and other media. The scanning distance is a great improvement compared with similar products. It also boasts high scanning speed and powerful reading ability with high accuracy.

Appearance:

• Bluetooth Wireless mode

Functions Setup:
Barcode Scanner can set up all default functions by reading the setup barcodes.

One-key Pairing Mode without PIN Code
Scan the barcode below directly, and search for pairing.

1340590081

Pairing with another device

Pressing the 10s power key when the scanner is powered off when you hear two beeps, and then a long beep, it can be paired with another Bluetooth device.

Pairing with Windows 7/8/10

1. Start barcode scanner, the indicator is blue, on/off flashing ratio is 1 :1

2. In the PC with Win? OS, click ‘Start> Devices and printers>
   Add a device, and search for a barcode scanner.
   Turn on the Bluetooth in Win8/10, and search for the barcode scanner.

3. Double click barcode scanner, no need to input PIN code in the Bluetooth pairing request dialog.

4. Click ‘Next’ or ‘OK’, after a beeper, paired successfully, then the indicator turns blue and is always on

Pairing with Android devices

1. Turn on the barcode scanner, the blue indicator is flashing with an on/off ratio of 1:1
2. Turn on the Bluetooth on Android devices, search for barcode scanner
3. Click the one you want to connect to, click Next or OK,after a beeper, pair successfully. You will find it shows”connected” on the Android device, then the indicator turns blue and is always on.

Note:

1. If you want to set up the function of the barcode scanner. Read the ‘Enter Setup’ barcode, then the ‘Function Setup’ barcode, and close with the ‘Exit with Save’ bar code.
2. If the device has been paired with a Bluetooth device and needs to be paired with another one, press the 10s power key when the scanner is powered off to pair with another Bluetooth device.

Pairing with iOS devices

1. Turn on the barcode scanner, the blue indicator is flashing with on/off radio 1:1.
2. Turn on the Bluetooth on the iOS device, and search for the barcode scanner.
3. Click the one you want to connect to, click Next or OK, and after a beeper, pair successfully. You will find it shows”connected” in the iOS device, then the indicator turns blue and is always on.

PIN Code Pairing Mode

If some devices can not pair without a PIN code, directly scan the barcode below, then search CTXX on the device, and enter”OOOO” for pairing.

1340590082

Note: When pairing with iOS devices, you need to restart the barcode after setting

LED Indicators

charged
Blue LED flashing| Bluetooth unpaired
Blue LED always on| Bluetooth paired

Beeper

LED flashing (on/off ration 1:1)
Three short beeps, tone descending from high to low| Enter or exit the setting mode
Three short beeps, tone ascending from low to high| Configuration correct

Common Function Barcodes

| |
---|---|---
1340599999| 1340599997| 1340590121

FCC Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment should be installed and operated with a minimum distance of 0mm between the radiator and your body.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the  user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help.

DISCLAIMER

• WE DISCLAIM ANY AND ALL LIABILITY FOR THE DAMAGES CAUSED BY NATURE DISASTERS, SUCH AS EARTHQUAKES, FLOODS ETC.
• UNDER NO CIRCUMSTANCE, DOES CALICO DISCLAIM ANY AND ALL LIABILITY FOR ANY DAMAGES WHICH IS CAUSED BY THE USE OF OUR  PRODUCTS (INCLUDING THE DAMAGES CAUSED BY USING THE QUICK START GUIDE), SUCH AS THE COMPANY PROFIT LOSS, CREDIT LOSS,  INTERRUPTION OF BUSINESS, STORAGE DATA LOSS/ CHANGES OR ANY OTHER PARTICULAR, DIRECT/INDIRECT LOSS CAUSED BY THIS.
• WE DISCLAIM ANY AND ALL LIABILITY FOR THE DAMAGES WHICH IS CAUSED BY THE MISUSE OF COMMUNICATIONS HARDWARE OR  SOFTWARE WE DON’T SPECIFY.
• FOR THE INFORMATION, DATA, FILES, OR ANY OTHER PRODUCTS AND SERVICES WHICH ARE ACCESSED BY USING OF OUR DEVICES, WE DO  NOT PROVIDE ANY FORM OF GUARANTEE OR TECHNICAL SUPPORT. AND WE DISCLAIM ANY AND ALL LIABILITY FOR THE USE OF ABOVE  MENTIONED BY THE USERS.
• WE DISCLAIM ANY TYPE OF GUARANTEE AND TECHNICAL SUPPORT LIABILITY FOR THE THIRD-PARTY SOFTWARE WHICH IS USED BASED  ON OUR PRODUCTS.
• THIS MANUAL IS DELIVERED ON AN “AS-IS” AND “AS- AVAILABLE” BASIS. EXCEPT WHERE PROHIBITED BY LAW, WE DO NOT MAKE ANY  TYPE OF SPECIFIC PROMISES TO THE ACCURACY OR RELIABILITY OF THE CONTENT.

1. Please remove the power and USB cable under thunderstorm weather conditions, to avoid damage from thunder and lightning.
2. Keep away from heat sources, please ensure sufficient air circulation.
3. Pay attention that the scanner is waterproof during storage, transportation, and running.
4. Please use the DC 5V500mA power adapter offered by the authorized producer.

The company reserves the right to interpret this quick start guide

Documents / Resources

| Cilico T90 Barcode Scanner [pdf] User Manual
T90 Barcode Scanner, Barcode Scanner
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>