Mpow BH481A-1 MBITS S TRUE WIRELESS EARBUDS User Manual
- June 5, 2024
- MPow
Table of Contents
Mpow BH481A-1 MBITS S TRUE WIRELESS EARBUDS
PACKING LIST
DIAGRAM
POWER ON
Mode 1 (Auto)
Mode 2 (Manual)
- The earphones automatically turn on (with blue LED light flashing) and start pairing when they are taken out from the charging case
- In the shutdown status and when the earphones are not in the charging case, simultaneously press and hold the MFB of both earbuds for 2 seconds to power on (with the blue LED light flashing)
POWER OFF
Mode 1 (Auto)
Mode 2 (Manual)
- Put the earphones back in the charging case, and theyll shut down automatically.
- If the earphones are not in the charging case, just press and hold the MFB of both earbuds for 5 seconds to power them off. (Mode 2 cannot be conducted during music playing or calling)
PAIRING
Model
Mode2
- The earphones automatically start pairing (with the red and blue LED light flashing quickly on the right earbud) when they are taken out from the charging case, and choose “Mpow MBits S” on your device.
- Manually Switch to Pairing Mode:
When both earbuds are not in the charging case and in the state of power-off (keep pressing both MFB for 5 seconds to tum them off). Keep pressing both MFB for 4 seconds to re-enter into pairing mode in which LED flashes blue and red alternately. Finally. choose “Mpow MBits S’ on your device
MUSIC
INCOMING CALL
MUSIC & INCOMING CALL & Siri
-
Volume Up/ Down
Volume+: press and hold the MFB button of Right earbud to turm up the volume increasingly Volume- :press and hold the MFB button of Left earbud to turn down the volume decreasingly. -
Next/Previous Track
Next Track double tap the MFB of Right earbud Previous Track: double tap the MFB of Left earbud. -
Play/Pause
Tap the MFB of either earbud once -
Answer
Tap the MFB of either earbud once. -
Mute
When you are havinga phone call you can tap either earbud once to mute or unmute the earbud’s microphone. -
Hang Up
Double tap the MFB of either earbud. -
Reject
Press and hold the MFB of either earbud for 1 second. -
Activate Siri
Triple-tap the MFB of either earbud.
RESET
In the state of charging. simultaneously press and hold the MFB of both earbuds for 10 seconds. The LED light will flash blue, which means that the paired information is cleared successfully.
CHARGING
Do not put the earbuds in the charging case when the earbuds are wet
CORRECT DISPOSAL OF THIS PRODUCT
(Waste Electrical& Electronic Equipment) This Marking shown on the product or its literature,indicate that it should not be disposed with other household wastes at the end of its working life. To prevernt possible harm to the environment or human health from uncontrolled waste disposal. please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.Household user should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contact. This product should not be mixed with other commercial wastes for disposal.
FCC STATEMENT
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FC Rules Operation is subject to the following two conditions (1) This device may not cause harmful interference, and (2) this device must accept any interference received. including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protectiorn against
harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and. if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>