HCY-Q40 Intelligent Remote Control User Manual

HCY-Q40 Intelligent Remote Control

Picture Image

Fn: Switch to the red character function and the Fn indicator lights up; Press again to switch back to the default function, the Fn indicator goes out. Quickly enter www.and.com characters

Pairing method

The remote control and USB receiver are already paired atthe factory, so the receiver can be used directly after plugging it in lIf the remote control and the receiver can not be paired due to misoperation or other reasons during use you can connect by the following methods:

Infrared Function and Machine Learning

Principle: when the air mouse remote control is not connected to the USB receiver, the front buttons are infrared (except for [Air mouse] [Voice] [Light] button). It is 2. 4G transmission once remote control connect with the USB receiver. [Power] button keeps the infrared signal sending.

1. Press and hold the [OK]+ [Power] button at the same time for around 3 seconds, the indicator light will change from dim to bright, then release both buttons.
2. Press the button need to learn’, the indicator light flashes, waiting for the machine learning signal;
3. Place the original remote control at and the air mouse on the desk, head to head (the distance between them is about 10cm). Press the button you want to learn for about 3 seconds; after the learning is successful, the indicator light flashes 3 times and will stay on. Repeat steps b-c continuously for multiple buttons learning process.
4. Press the [Air Mouse] button to exit the learning mode and save the learning data.

Turn-over prohibition
For prevention of mistakenly pressing the button, only face-up buttons are function, face-down buttons’ function are disable.

Sleep and Wake Up Feature
The remote control goes into sleep mode after 15 seconds standby without using. The blue indicator light goes off. Press any button to wake up the remote control.

Cursor Locking Function

Press [Air mouse] button to turn on the air mouse function, the blue indicator light will stay on. Under the air mouse mode, the cursor moves in the same direction as the remote control. [Confirm] button will be the left click for the air mouse. Press the [Air Mouse] button to turn on/off the function of the air mouse, blue indication light will go off once the control turn off.

CPI Adjustment

CPI (Count Per Inch). Speed of the Mouse Cursor Adjustment
(4 Levels), 1, 2, 3, 4 Level. The higher the level, the faster the
speed. The default speed is set at level 2.

1. Speed Increase:
   Press and hold the [OK] button +[Volume+] button together for 3 seconds, once the blue indicator flashes twice, release both buttons, CPI will increase one level.

2. Speed Decrease:
   Press and hold the [OK] button [Volume-] button together for 3 seconds, once the blue indicator flashes twice, release both buttons, CPI will decrease one level.

Anti-lost function

When you cannot find the remote control, you can press the button on the receiver and the remote will make a beep sound for one minute, so that you can find the remote easily. Please pay attention when you using the anti-lost function

1. The USB receiver must plug into a power on device (such as PC/TV).
2. If no respond from the remote control, the distance might exceed over 10 meters signal range or the remote control run out power.

Touchpad function

Controlled by gestures on the touchpad

Indicator light descripton

Reset to Factory Settings
Press [OK] + [Left] together until the indicator flashes, then release the button.

Charging Cable

Specifications

• wireless modulation method:GFSK
• Modulation frequency:2.4~2.4835GHz
• Working temperature:-20°C-65°C
• Battery type:550mAh/3.7V lithium battery
• Machine power consumption:63mA
• Standby power consumption:58uA
• Number of buttons:61 keys
• Remote control distance:8-10meters
• Charging port :Micro USB
• Dimensions:192.2x 53.2x 16.8MM
• Product net weight:162.9+5g
• Support system:AndroidiWindows \Mac OS\Linux

Note

• This product uses a built-in lithium battery and the input voltage is 5V when charging.
• If the remote control is not used for a long time or the battery is low, please fully charge it before using it.
• Use the specified USB cable to charge the remote control, overcharging will shorten the battery life.
• Avoid use in hot or cold environments, which will shorten the battery life.
• Keep this product away from liquids, such as water. Pictures for reference only, the actual product shall govern.

Package contains

1. Remote controlx1
2. USB Receiverx1
3. USB charging cablex1
4. Instruction Manualx 1

FCC Requirement

changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>