siren marine SM-ACC-ACRE-120 S3P 120V Shore Power Relay Instructions
- June 5, 2024
- siren marine
Table of Contents
siren marine SM-ACC-ACRE-120 S3P 120V Shore Power Relay Instructions
Installation Instructions
Note: There are three separate switches that can be used on the relay. Each normally closed (NC) circuit correlates with a specific COM circuit as indicated by the dotted lines.
Note: Posi-Tap™ connectors, terminal block, or other connection type can be used to connect the wiring cable to sensor wires.
Wires are not included with this relay and may not match the color of your boat wiring.
- Ensure AC power is OFF.
- Assemble the relay by matching the pins on the gray piece to the sockets on the blue piece and push together firmly.
- Connect the “Shore power (light green)” wire from the Siren 3 Pro wiring cable to one of the normally open (NO) terminals on the relay.
- Connect a wire from DC Common Ground to the “COM” terminal of the corresponding relay switch.
- Connect the AC Hot wire (black) to one of the “COIL” terminals of the relay.
- Connect the AC Neutral wire (white) to the OTHER “COIL” terminal of the relay.
- Leave the AC Ground wire (bare wire or green) unconnected to this relay.
Product SKU: SM-ACC-ACRE-120
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>