siren marine SM-SAT-OFFS SirenSat Offshore Antenna Instructions

June 12, 2024
siren marine

siren marine SM-SAT-OFFS SirenSat Offshore Antenna

siren marine-SM-SAT-OFFS-SirenSat-Offshore -Antenna-
PRODUCT

Product Information

The SirenSat Offshore Antenna is a component designed for use with the Siren 3 Pro Device. It is used to enhance the signal reception for offshore applications. The product SKU is SM-SAT-OFFS.

Product Usage Instructions

  1. Ensure that the SirenSat Offshore Antenna is not connected to a 24V battery as it is not compatible.
  2. Identify the wiring cables and harnesses:
    • Wiring Cable 1 (Harness 1): White wire corresponds to Input #1 (Security 1), and Light Blue wire corresponds to Input #2 (Security 2).
    • Wiring Cable 2 (Harness 2): Light Blue wire connects to Security 2 (pink) on Wiring Cable 2.
  3. Connect the SirenSat Offshore Antenna as follows:
    • Violet Positive Wire: Connect to a power source with a voltage range of +8VDC to +22VDC. Do not exceed +22VDC.
    • Blue or Green Wire: Connect to the DC common ground or battery negative (-) terminal.
  4. Move the switch on the SirenSat Offshore Antenna to the ON position.
  5. For security sensor/accessories:
    • Connect Battery 1 (+) to the positive terminal.
    • Insert a 5A fuse in the designated slot.
    • Connect the power source with a voltage range of +9VDC to +30VDC to the DC common ground (-) terminal.

Wiring Diagram

For Siren 3 Pro Devicesiren marine-SM-SAT-OFFS-SirenSat-Offshore
-Antenna-FIG-1

Installation Instructions

  1. Connect the Siren Sat violet wire to positive (+) to the battery positive lead (+8VDC to +22VDC)
  2. Connect the SirenSat blue or green wire to DC Common Ground (either blue or green should be wired – both are not required).
  3. Security 1: Connect the SirenSat white wire with the desired security sensor/accessory using a wiring connector [i.e. Posi-Tap? connector (posi-products.com) or terminal block] to the Security 1 wire on Wiring Cable 1 (pink).
  4. Security 2: (Wiring Cable 2 Required) Connect the SirenSat light blue wire with the desired security sensor/accessory using a wiring connector to the Security 2 wire on Wiring Cable 2 (pink).

Product SKU: SM-SAT-OFFS

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals