SM Tek Group ZLD103 Party Foam Glow Stick User Manual
- June 5, 2024
- SM Tek Group
Table of Contents
SM Tek Group ZLD103 Party Foam Glow Stick
INTRODUCTION
Do you like glow sticks? What if they were way bigger and made of foam? That sounds so much better, right? Well then this is the product for you. LED Party Foam Glow Sticks are here to make any party – THE party. With 3 different glow options, this party tool is essential when getting together to celebrate anything
PACKAGE CONTENTS
- 2x LED Foam Glow Sticks
SPECIFICATIONS & FEATURES
- 18.25″ Long and 1.5″in circumference
- Soft foam like material
- Battery included
- 3 Different color changing modes
PRODUCT OVERVIEW
HOW TO USE
Battery Slot
- Take plastic film off of the foam stick combo
- Remove plastic piece from the battery slot
- Turn on with button
HOW
TO REPLACE BATTERIES
- Unscrew the screw and remove the battery COver (screwdriver not included)
- Place 2 new batteries inside with the + side facing the springs
- Close the compartment back up and tighten Negative Side- Screw
CARE AND SAFETY
- Do not use this unit for anything other than its intended use.
- Keep the unit away from heat source, direct sunlight, humidity, water or any other liquid.
- Do not expose the device to extremely high or low temperatures, as it may damage the battery.
- Do not operate the unit if it has been wet or moist to prevent against electric shock and/or injury to yourself and damage to the unit.
- Do not use the unit if it has been dropped or damaged in any way.
- Repairs to electrical equipment should only be performed by a qualified electrician. Improper repairs may place the user at serious risk.
- Keep the unit out of reach of children.
- This unit is not a toy.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>