QAZQA 98359 Jeany SL 3 White Track Light Instruction Manual
- June 5, 2024
- QAZQA
Table of Contents
QAZQA 98359 Jeany SL 3 White Track Light
SAFETY INSTRUCTION
- Please study the instruction manual and below information carefully before installing or using this product.
- Please keep this User manual tor further reference
- The luminaires may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
- Maintenance of the luminaires is limited to their surfaces. During maintenance, no moisture can come into contact with any areas of the terminal connections or voltage control parts.
- The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
- Exterior lighting must not be installed during rain.
- Take into account of the minimum separation distance from other objects and the room required around the fitting.
- If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
- Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low voltage conductors.
- Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
- Take account of all available technical information.
- Meaning Of symbols
- For indoor use only, where direct contact with water is impossible
- This icon indicates the level of water-proof and dust-proof
- Protection Class I: the fitting must be earthed
- Protection Class l: the fitting is doubled insulated and does not require earthing
- Protection Class Ill: the fitting is low voliage
- Minimum distance from lighted objects (meters)
- The type of lamp and maximum size and wattage indicated in each lighting unit must no be exceed; different items require different kind of light sources with different bulb icons
- The armature is designed to work only with the indicated voltage. Different items require different working voltage.
- The luminaire can be used in combination with a dimmer
- The reference light angle and light space of the luminaire
- This luminaire cannot be disposed together with normal domestic waste in standard rubbishcan, but you have to bring it to a staging area for electrical waste
- Take note ot the symbols when connecting wires
What is in box
How To Use
Instructions
TO INSTALL
- Align arrows on spotlight track adaptor with the polarity groove on the track.
- Push up into track and rotate CLOCKWISE 90″while gently pulling back on the sliding cover until it locks into place.
- TO REMOVE: Hold the spotlight and gently pull down on the track adaptor and rotate ANTI-CLOCKWISE 90
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>