JVC LT-GN27225A LED Monitor User Guide
- June 5, 2024
- JVC
Table of Contents
LT-GN27225A LED Monitor
User Guide
Important Notice:
Please retain the original packaging for Warranty purposes. Please return
with ALL supplied accessories.
The supplier reserves the right to make changes at any time without prior
notice.
Warning and Precautions
Warning: To avoid the risk of electric shock, do not remove the cover (or
back).
No user-serviceable parts inside.
Refer servicing to qualified service personnel.
WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS APPARATUS
TO RAIN OR MOISTURE.
CAUTION: TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES REGARDING
THE USE OF THIS UNIT.
- Operate only from the power source specified on the unit.
- Avoid damaging the AC plug and power cord.
- Avoid improper installation and never position the unit where good ventilation is unattainable.
- Do not allow objects or liquid to fall into the cabinet openings.
- In the event of mechanical damage, unplug the unit and call a service technician. Do not attempt to repair it yourself or remove the rear cover.
Changes or modifications not approved by JVC could void the warranty.
- When you don’t use this monitor for a long period of time, be sure to disconnect the power plug from the AC outlet for your safety.
- To prevent electric shock do not use this power plug with an extension cord, receptacle, or another outlet unless the blades can be fully inserted to prevent blade exposure.
Do not attempt to service the product yourself Caution
To prevent electrical shock, do not open the monitor casing.
There are no user-serviceable parts inside.
Please refer to qualified service personnel for repairs.
Warning and Precautions
WARNINGS
-
Ensure at least a 10 cm gap around the product for ventilation. An internal temperature rise may cause a fire and damage the product.
-
The ventilation should not be impeded by covering the ventilation openings with items such as newspapers, clothes, curtains, etc.
-
When installing the product on a cabinet or shelf, make sure that the bottom edge of the front of the product is not protruding.
-
Do not install the product within the reach of young children.
-
Do not place objects containing liquid (vases, pots, bottles, etc.) or metallic objects on top of the product.
-
If the product falls or the exterior is damaged, power off the product, remove the power cord and contact Customer Service.
-
Do not place the power cord or product near heat sources such as direct sunlight, heat, or a hot object such as a stove.
-
The monitor must not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the unit.
-
Always handle the monitor with care when moving it. Don’t put any pressure on the screen as it is fragile.
-
Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke.
-
Installing the product in an unusual place (a place exposed to a lot of fine dust,
chemical substances, extreme temperatures, or a significant presence of moisture, or a place where the product will operate continuously for an extended period of time) may seriously affect its performance. -
If the product generates a strange noise, a burning smell, or smoke, remove the power cord immediately and contact Customer Service.
-
Looking at the screen too close for an extended period of time can deteriorate your eyesight.
-
Rest your eyes for at least 5 minutes for every 1 hour of product use.0
-
Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time (vacation, etc.).
-
To move the product, first disconnect all the cables from it, including the power cable.
Base Installation Instructions
The Stand Base must be securely installed as shown below unless using an
external mount.
VESA100 x100mm ,M4 Screw.
Place them down on a flat surface, onto a towel or blanket to avoid damaging
the screen
-
Align the screw holes on the back of the monitor with the ones on the Support Pole and use the screws (4 pieces PM4 x 5mm) to attach the Pole to the monitor.
-
Fix the Cover over the Screw Compartment.
-
Attach the Base to the Support Pole using the screw (1 piece PM4 x 10mm) and the Rubber Pad as shown.
-
Assembly is complete. The monitor can now be placed on a stable, flat surface.
Accessories
Product Overview
Ports
HDMI | Connect to a device using an HDMI cable. |
---|---|
DP(DISPLAY PORT) | Connect to a PC or other source device using the provided |
Display Cable.
AUDIO OUT| Connect to an audio output device such as headphones or earphones.
USB| DC 5V, 1A power output for charging devices
DC 12V/4A| Connect to the AC/DC adapter.
Button Functions
Note: The Multifunction Button has several functions. Press it or move in the correct direction as shown to perform the desired function.
-
Power
Press and hold for a few seconds to turn the monitor on or to switch it to shutdown status. -
Power Indicator
When the monitor is on, the indicator light will be blue. When the monitor is in Standby mode,the indicator light will be red and when the monitor is off, the indicator light will be off. -
EXIT
Push to the left to select input sources or to exit the current menu. -
DOWN
Select and adjust the OSD items ( Decrease the value). -
Menu
Push to the right to bring up the OSD menu. -
UP
Select and adjust the OSD items ( Increase the value).
1. Push to the right to access the main menu.
2. Push up or down to scroll through the main function options.
3. Push to the right again to enter the selected sub-menu. Push up or down to
adjust the desired options.
4. Push to the left to return to the main menu.
Operation Menu Functions (OSD)
Main Menu
| Sub-Menu| Option|
Description
---|---|---|---
Brightness| Brightness| 0-100| Adjust display brightness
Contrast| 0-100| Adjust display contrast
ECO| Standard, RTS, FPS,
TEXT, Movie, Game| Set vertical mode
DCR| On/Off| Turn DCR (Dynamic Contrast Ratio) function On/Off
HDR Mode| AUTO, OFF,2084| Turn HDR function auto/off/2048
MPRT2| On/Off| Turn the MPRT2 function On/Off
Image.Setup| H.Position| 0-100| Adjust the horizontal postition
V.Position| 0-100| Adjust the vertical postition
Clock| 0-100| Adjust the clock setting
Phase| 0-100| Adjust the clock phase setting
Aspect| 16:9,4:3| Set aspect ratio
Low Blue Light| 0-100| Adjust the Low Blue Light setting
Color Setup| Color Temp| Warm, Cool,User| Adjust color temperature
Red| 0-100| Customize RGB components
Green| 0-100
Blue| 0-100
OSD Setup| Language| English, Fran~ais, DEUTSCH,(kt #
, Italiano,ESPA 0NOLO,PORTUGU ES,TURKCE,POL
SKI, N EDERLAN Ds, E $%. 83| Set OSD language
OSD H.Positon| 0-100| Adjust the horizontal postition
OSD V.Positon| 0-100| Adjust the vertical postition
OSD TIMEOUT| 0-60| Set how long the OSD remains
TRANSPARENCY| 0-100| Adjust the OSD transparency value
RESET| RESET| N/A| Reset OSD settings to factory default; press the Menu
button to confirm
Other Setup| Signal Source| DP/HDMI| Set input source
MUTE| On/Off| Turn the MUTE function On/Off
Volume| 0-100| Adjust Volume
Freesync| On/Off| Turn Freesync On/Off. Press the menu to confirm
OD| On/Off| Turn Over Drive function On/Off
Standard Signal Mode Table
Synchronization | Horizontal Frequency | 30- 81 kHz |
---|---|---|
Vertical Frequency | 50-75Hz | |
Resolution | Optimum Resolution | 1920 x 1080@60 Hz |
Maximum Resolution | 1920 x 1080@60 Hz |
If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will automatically be adjusted. If the signal transmitted from the PC does not belong to the standard signal modes, the screen may be blank even though the power LED turns on. In such a case, change the settings according to the following table by referring to the graphics card user manual.
Resolution| Horizontal Frequency (kHz)| Vertical Frequency
(Hz)| Pixel Clock (MHz)| Sync Polarity (HIV)
---|---|---|---|---
IBM, 720 x 400| 31.469| 70.087| 28.322| -/+
VESA, 640 x 480| 31.469| 59.94| 25.175| -/-
MAC, 640 x 480| 35| 66.667| 30.24| -/-
VESA, 640 x 480| 37.861| 72.809| 31.5| -/-
VESA, 640 x 480| 37.5| 75| 31.5| -/-
VESA, 800 x 600| 35.156| 56.25| 36| +/+
VESA, 800 x 600| 37.879| 60.317| 40| +/+
VESA, 800 x 600| 48.077| 72.188| 50| +/+
VESA, 800 x 600| 46.875| 75| 49.5| +/+
MAC, 832 x 624| 49.726| 74.551| 57.284| -/-
VESA, 1024 x 768| 48.363| 60.004| 65| -/-
VESA, 1024 x 768| 56.476| 70.069| 75| -/-
VESA, 1024 x 768| 60.023| 75.029| 78.75| +/+
VESA, 1152 x 864| 67.5| 75| 108| +/+
MAC, 1152 x 870| 68.681| 75.062| 100| -/
VESA, 1280 x 720| 45| 60| 74.25| +/+
VESA, 1280 x 800| 49.702| 59.81| 83.5| -/+
VESA, 1280 x 1024| 63.981| 60.02| 108| +/+
VESA, 1280 x 1024| 79.976| 75.025| 135| +/+
VESA, 1440 x 900| 55.935| 59.887| 106.5| -/+
VESA, 1600 x 900| 60| 60| 108| +/+
VESA, 1680 x 1050| 65.29| 59.954| 146.25| -/+
VESA, 1920 x 1080| 67.5| 60| 148.5| +/+
VESA, 1920 x 1080| 177.7| 120| 279.8| +/+
VESA, 1920 x 1080| 213.2| 144| 335.7| +/+
VESA, 1920 x 1080| 244.3| 165| 384.7| +/+
-
Horizontal Frequency
The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal frequency. Horizontal frequency is measured in kHz. -
Vertical Frequency
Repeating the same picture dozens of times per second allows you to view natural pictures. The repeat frequency is called “vertical frequency” or “refresh rate” and is indicated in Hz. -
This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the
nature of the panel. Using a resolution other than the specified resolution may degrade the picture quality.
To avoid this, it is recommended that you select the optimum resolution specified for your product. -
Some resolutions listed in the table above may not be available depending on graphics card specifications.
Technical Features
Display | 68.5 cm (27″) |
---|---|
Aspect Ratio | 16:09 |
Resolution | 1920X1080@165Hz |
Brightness | 250 cd/m° |
Contrast | 3000:1 Dynamic Contrast |
Viewing Angle | 178(H); 178 (V) |
Menu OSD | Multi-Language |
Input Terminals | HDMI |
DP
AUDIO-OUT
USB
DC
Power| DC 12V/4A
Consumption| <48W
Unit Size(incl.stand)| 614x179x435mm
Net Weight| 3.5kg
VESA| 100x100mm
Failures| Possible solutions
---|---
The power
the indicator does not work.| • Make sure the power is switched on.
• Make sure the power cord is connected.
The plug-and-play function does
not work.| • Make sure the PC matches the plug-and-play function.
• Make sure the display card matches the plug-and-play function.
Dim image.| • Adjust the brightness and contrast.
Unsteady image or picture ruffling.| • Some nearby electric equipment may
cause electronic interference.
The indicator lamp of the power works (flickers)but there is no image on the
display.| • Check to see whether the power of the computer is switched on.
• Check to see if the computer’s graphics card is inserted correctly.
• Check to see if the monitor’s signal cable is properly connected to the
computer.
• Check the plug of the monitor’s signal cable and confirm that each pin is
not deformed.
• Tap any key on keyboard of the PC to power up if the PC is in standby mode.
• Look at the power indicator on the PC keyboard and confirm whether the
computer is working correctly.
Colour loss (red, green, blue)| • Check the signal cable of the display and
confirm that each pin is not curved.
Chromatic aberration in the picture (the white color doesn’t look white)| •
Adjust the RGB color or reselect the color temperature
Register your product at jvctv.com.au/warranty- registration
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>