Shenzhen Pinjinda STG-6668-KB Infrared Induction Wireless Charger User Manual
- June 5, 2024
- Shenzhen Pinjinda
Table of Contents
Shenzhen Pinjinda STG-6668-KB Infrared Induction Wireless Charger
Thank you for purchasing and using this product!
Please read this Operation Instruction carefully and keep it properly before
using this product.
Product Specification
C10 Fast Wireless Charyer
- Input: 5V-2A/9V-1.67A
- Output:5V=1.5A/9V=1.2A
- Charging Efficiency: 75%
Applicable Devices
Compatible with all devices with Qi Standard
For all other mobiles without Qi Standard, those will be working with wireless
receivers.
Innovative Technology
Product overview
Installation Steps
-
Adjust the screw cap to the best active status
-
Input:Connect the wireless charger and car adapter with the charging cord.
Must use Qualcomm quick charge adaptor for fast wireless charging.
-
Press the button of clip to fix, then adjust the angle and tighten the fixed nut.
-
Place smartphone
-
Take off smartphone
-
LED indicated light shows the working status:
-
Blue lights on to show normal work
-
The red light flashes to show not working properly
Attention
- Please keep the charger away from water or other liquid.
- If you need to clean the charger, please make sure it is not connected power supply.
- Using Environment temperature remains-20-45°C.
When the LED light flashes during the wireless charging, which indicates a charging failure.
The following situations can cause failures like the high temperature, slow charging and no charging!
- The adapter is not up to standard (No PC USB output power supply)
- The charging cable is not up to standard;
- The phone case is too thick (recommended phone case thickness within 2mm)
- The phone is not placed at the center of the wireless charger
- There is metal/magnet on the back of Cell phone or phone case.
- Cell phones do not support Qi wireless charge function.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>