adx MICRO 2 Bluetooth Speaker User Manual
- June 5, 2024
- adx
Table of Contents
MICRO 2 Bluetooth Speaker
User Manual
MICRO 2
Bluetooth Speaker
Warning
To ensure proper use and trouble-free operation, please carefully read this
user manual.
For first-time use, a full charge is recommended.
- Please use and store this product at room temperature.
- Do not expose this product to conditions such as rain, fire, high temperature, or direct sunlight.
- Do not use organic solvents or other chemicals to clean this product.
- Do not throw or drop this product to avoid damage.
- Do not allow small particles to get into this product.
- Please adjust the speaker volume accordingly to avoid temporary or permanent hearing loss.
- Do not disassemble or modify this product.
- The warranty will be voided.
- Only charge with a rated voltage charger.
- Supervise the use of this product with children.
Note :
- Improper battery replacement may cause an explosion. Only replace with the same type or equivalent battery.
- Do not expose the battery to sunlight, fire or excessive heat.
Packing Contents
MICRO 2 Speaker 1
User Manual 1
Type-C charging cable 1
Lanyard 1
Button Functions
Power Key: Press and hold for 2 seconds to power on/off.
Play / Pause: Short press to pause / play music.
Bluetooth connection: Short press twice to disconnect. Short press again
to reconnect the last paired device.
Bluetooth hands-free function: Short press to answer the phone / hang up.
Press and hold to reject the call.
Ports Function
Charging : Charge with a DC5V-500mA or higher USB adaptor.
Built-in LED Indicatorstays on while charging.
When fully charged the light turns off.
Bluetooth Connection
Turn on the speaker : Turn on Bluetooth on your mobile device or
computer. Find the Bluetooth device “My MICRO 2” and connect it If a password
prompt appears, input “0000” and confirm to connection.
Next time the speaker will automatically reconnect to the last paired device
once your device’s Bluetooth is turned on.
True Wireless Stereo Function
TWS Connection
Turn on two MICRO 2 speakers and make sure neither of them is paired with your
device.
Choose either one of the speakers and short press the power key twice. You
will hear a “Ding Dong” sound while pairing from the main speaker).
After the “Ding Dong” sound, the TWS system is set up successfully.
Main Speaker Sub-speaker
- The TWS system only supports two speakers.
- Once the two speakers are paired, they will remember the main and sub-speaker. Next time, they will reconnect automatically.
- When TWS is paired successfully, both speakers will have the same functions simultaneously.
Specifications
Technical Parameters
Power supply: Built-in 500mAh lithium battery
Charging time: DC5V-500mA fully charges within 2 hours
Playtime: 4+ hours at mid-volume
Speaker system: 1.5-inch internal magnetic trumpet
Output power: 3W THD=1%
Frequency response: 120Hz-20KHz
Bluetooth version: Bluetooth 5.0
External interface: USB Type-C
Dimension Product net weight: 116g including built-in lithium battery
Product size: W 56×D56×H35 (mm)
FAQ Questions Solutions
Cannot connect to your device
- Restart the speaker
- If a password request is prompted, enter 0000
No voice or intermittently playing
- Ensure the speaker is within the operating range
- Check that the speaker and device range are not blocked.
No sound when playing
- Check and adjust the volume level
- Check whether the speaker is paused or on a mute setting
Cannot power on
- Check battery level
- Ensure the power adapter & cables are functioning
- Charge the speaker and try again
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions (1)this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>