Omate O6L 4G Video Call Smart Watch Instruction Manual
- June 5, 2024
- Omate
Table of Contents
O6L 4G Video Call Smart Watch
Instruction Manual
Download & Register App
Search and download the “Wherecom” App from the App Store or Google Play Store.
- Open the App and tap “Register” to start account registration.
- A valid email account is a must as a verification code will be sent to the email address.
- Click “Get code” to send the verification code and check your email for the code. Enter the verification code and other personal info to complete the registration.
Note: Please enter a valid email and verification code (received via email).
SIM Card Installation
- Pull the SIM card tray on the left side of the watch.
- Put the NANO SIM in the tray.
- Put the card tray into the watch.
- Restart the watch.
Binding Watch
- Switch on the device. After boot up, the device will display the Binding QR code.
- Open the App and click Add Device.
- Please allow the app to access the phone camera.
- Scan the QR code on the device.
- The first user who scans and binds the device will be set as the Administrator to the device by default. The administration will have full access to all the settings.
Two-way Communication
Slide the screen to enter “Phonebook”, and select one contact to make phone
calls. Press the power button to end phone calls.
Voice Chatting
Access “Voice Chatting”, hold the mic to make a voice message, and release it
to send out.
Pedometer
All-day activity tracking, track your steps.
SOS
Hold the SOS button for three seconds to start the SOS. An alarm together with
the kids’ position as well as a 30-second voice recording will be sent to the
parents’ phones.
Taking Photos
With a 2MP front camera, the device supports photo-taking. Users can store the
photos in the album, and browse or delete them freely.
Video Call
Video calls can only be initiated from the App.
Making Friends
Enter the friend’s mode in the main interface. Make sure the devices are
within 2m range to each other. Shake the device to make friends with others.
Change Theme
- Press the home screen for 3 seconds to switch to another theme.
- Left slide or right slide the screen to choose the theme.
- Click to confirm a theme that you prefer.
Specifications.
1.3 inch TFT screen with Capacitive touch
2M Pixel Camera
Battery life up to 2 days Product
Splash proof
Wrist size up to 62mm diameter
Supports 3G (WCDMA) &4G(FDD) networks.
3G WCDMA: B1/B6/B19,FDD：B1/B3/B8/B19/28B
Nano SIM card
The app supports iOS 7.0 & Android 4.3 above
USB Charging: 5V, 1A.
Wireless Connectivity: WCDMA, 4G, WiFi, Bluetooth, GPS
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
SAR tests are conducted using
Standard operating positions are accepted by the FCC with the smartwatch
transmitting at its highest certified power level in all tested frequency
bands, although the SAR is determined at the highest certified power level,
the actual SAR level of the smartwatch. While operating can be well below the
maximum value, in general, the closer you are to a wireless base station
antenna, the lower the power output. Before a new model smartwatch is
available for sale to the public, it must be tested and certified to the FCC
that it does not exceed the exposure limit established by the FCC, Tests for
each smartwatch are performed in positions and locations (e.g. at the wrist
and worn on the body)as required by the FCC.
Next to mouth and Wrist-worn mode Operation
This device was tested for typical next-to-mouth and wrist-worn operations. To
comply with RF exposure requirements, for next-to-mouth mode, a minimum
separation distance of 10mm must be maintained between the user’s head and the
handset, including the antenna, for wrist-worn mode, a minimum separation
distance of 0mm must be maintained between the user’s wrist and the watch,
including the antenna. Third-party belt clips, holsters, and similar
accessories used by this device should not contain any metallic components.
Accessories that do not meet these requirements may not comply with RF
exposure requirements and should be avoided. Use only the supplied or an
approved antenna.
Non-compliance with the above restrictions may result in a violation of RF
exposure guidelines.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>