Tt Innovation Technology TT2001 Heyday Wireless Bluetooth Earbuds User Manual
- June 5, 2024
- Tt Innovation Technology
Table of Contents
Wireless Earbuds
- decrease volume / hold-last track / mute call
- charge port
- increase volume / hold-next track
- hold on / off play / pause / answer/end calls
Included
- Wireless Earbuds
- Micro USB Charging Cable
Pairing
- Power ON using ON/OFF switch.
- Rapid flashing white light, followed by a chime
- Use Bluetooth settings on your phone to pair with HEYDAY EARBUD 01
- Slow flashing white light – pairing successful
Indicators
- Red/White Alternating – Bluetooth pairing
- Slow Flashing White – Paired
- Slow Flashing Red – Battery low
- Red – Charging
- White – Charging complete
- Ascending Tones – Powering on
- Descending Tones – Powering off
- Three Rapid Tones – Ready to pair
- Two Rapid High Tones – Paired
- Two Rapid Low Tones – Low battery
- Two Ascending Tones – Max. Volume
- Two Descending Tones – Min. Volume
Phone call function
- Press the ON/OFF switch to answer the incoming call, press the ON/OFF switch again to hang up after the call
- Press the + button to increase the volume
Press the - button to decrease the volume
The music will pause when a call comes in and will resume playing after the call has ended
Charging
- Full charge requires approximately 2-3 hours
- Charging is complete when solid white light turns on
- Plug micro end of charging cable into earbuds
- Plug USB end of charging cable into a DC 5V USB power supply
Troubleshooting and tips
- If the earbuds are not working correctly, turn them on/off to reset
- If the earbuds won’t turn on, recharge the battery and try again
- If the earbuds won’t charge, make sure the supply works, is 5V >1A, and not damaged
- If the earbuds make no sound adjust the volume
- If the earbuds make no sound or do not show as an available device, make sure they are not paired to another device, if so, unpair the device and re-pair the desired device
- This device does not have a pairing code. If prompted for one make sure you are connecting to the correct device. If you are, “forget” the device and re-pair. If you are still prompted enter 0000
NOTE:
The unit will power off after 2 minutes of no use.
Need some help?
Can’t get it to pair? Have a question or comment?
call us at: 877-698-4883 or: 877-MyTgtTech
online at: TargetTechSupport.com
Safety
- Do not use near any water source
- Do not modify or repair this device
- Do not use in high temperatures or extreme weather
- Do not use chemical detergents to clean your device, use a soft dry cloth
- Keep 5-10 inches between microphone and mouth when using the phone call function
FCC ID: 2AVTM-TT2001 Model: TT2001 Input: 5V Max 1A Made in China
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2)This device must
accept any interference received, including interference that may cause
undesired operation. Warning: Changes or modifications not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna. • Increase the separation
between the equipment and receiver. • Connect the equipment to an outlet on a
circuit different from that to which the receiver is connected. • Consult the
dealer or an experienced radio/TV technician for help.
Target Corp.Mpls.MN,55403 Phone:1-612-304-6073
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>