MPOWHC5 Bluetooth Headset User Manual
- June 5, 2024
- MPow
Table of Contents
Bluetooth Headset
User Manual
Package
- Headset 1
- 3.5mm Audio Cable
- Micro USB Cable
- User Manual.1
Diagram
- Adjustable Headband
- MIC
- MIC
- Comfortable Earpad
- Micro USB Charging Interface
- 3. Smm Audio Port
- MFB
- Previous Track /Volume –
- Next Track /Volume
Specification
Speaker Sensitivity 126±3dB | M IC Sensitivity -38± 3dB |
---|---|
Standby Time 200H+ | Talking Time 22H |
Charging Time 1.5-2H | Battery Capacity 230mAh |
Charging Input 5V =180mA |
Function Button
Charging
Connection With Two Devices
- Pair with your first device.
- Turn off the Bluetooth of the first device
- Hold on the MFB for 5s to enter into pairing mode and pair with your second device. The blue light will flash slowly after successfully connected.
- Turn on the Bluetooth of the first device, and manually connect “MPOW HC5′ in the paired list After the connection is successful, your headset is connected to the two Bluetooth devices at the same time (If the first device is the 105. then you need to manually connect If it is Android. it can be automatically connected.)
Call/Music Setting on PC
-
If you want to make calls on the Windows system with this headset please follow the steps below and make sure you’ve connected to the headset successfully.
After paring the headset to your PC. enter the Control Panel — Sound —Set Bluetooth Hands-free Audio as the default audio device Set Bluetooth Audio Input Device as the default microphone device Once the default device has been set correctly. please confirm that the default device of the calling software you use also haw been set correctly (if there is no sound for the first time use, double-click the MFB to activate the headset). -
If you want to listen to music on the Windows system with this headset please follow the steps below and make sure you’ve connected to the headset successfully. After paring the headset to your PC, enter the Control Panel —Sound—Set Bluetooth Audio Renderer as the default audio device Set Bluetooth Audio Input Device as the default microphone device
Q &A
-
How to Pair if Failed? In standby mode, hold the MFB and Volume+ button simultaneously for As to clear the pairing record. Then hold on to the MFB until the blue and red indicator lights flash alternatively to pair again.
-
Any Password Needed when Paring?
If needed, please try 0000 or 8888, 1111, 1234. -
HOW Can I Charge My Headset?
You can charge it via a USB cable. -
How to Restart the Headset if Failed?
Try to charge it via USB cable and then restart it
FCC Statement
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. This
device complies with part 15 of the FCC Pules. Operation is subject to the
following two conditions: (1 ) This device may not cause harmful interference.
and (2) this device must accept any interference received. including
interference that may cause undesired operation.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment has been tested and found to comply with the limits for a Class
B digital device. pursuant to part 15 of the FCC Pules These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy. if not installed and used in accordance with the
instructions. may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on. the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>