MOTOROLA SOLUTIONS 89FT7136 Wave Two-Way Radio User Guide
- June 5, 2024
- Motorola Solutions
Table of Contents
SOLUTIONS 89FT7136 Wave Two-Way Radio
User Guide
RF Energy Exposure Training and Product Safety Information for Portable Two- Way Radios
https://learning.motorolasolutions.com/User_Documentation
Caution
Before using this radio, read this booklet which contains important operating
instructions.
For information on product details, brochures, user manuals and approved
accessories. Please refer to
www.motorolasolutions.com.
Compliance with RF Exposure Standards
National and international regulations require manufacturers to comply with
the RF energy exposure limits for portable two-way radios before they can be
marketed. Your Motorola Solutions two-way radio is designed, manufactured, and
tested to comply with all applicable national and international regulations
for human exposure to radiofrequency electromagnetic energy. When two-way
radios are used as a consequence of employment, applicable regulations may
require users to be fully aware of and able to control their exposure to meet
occupational requirements.
RF Energy Exposure Awareness and Control Information and Operational
Instructions for Occupational Use
Notice: This radio is intended for use in occupational/controlled
conditions where users are aware of their exposure and can exercise control
over their exposure to meet the requirements in national and international
regulations. This radio device is not authorized for the general population or
consumer use.
For more information on what RF energy exposure is, and how to control your
exposure to ensure compliance with established RF exposure limits, consult the
following websites:
- https://www.fcc.gov/
- https://www.osha.gov/
- https://osha.europa.eu/en
- http://www.who.int/peh-emf/project/en/
- http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf11467.html
- http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01904.html
For additional user training information on exposure requirements, consult the following websites:
- https://www.motorolasolutions.com/en_us/about/company-overview/corporate-responsibility/governance-and-policies/wirelesscommunication-and-health-faqs.html
- http://learning.motorolasolutions.com/
RF Exposure Compliance and Control Guidelines
To control your exposure, and ensure compliance with the relevant RF exposure
limits, always adhere to the following guidelines:
- Do not remove any of the RF Exposure Labels if present from this device or its related accessories.
- Attach these instructions to the device when you transfer it to other users.
- Do not use this device if the operational requirements described herein are not met.
Operating Instructions
- Transmit no more than 50% of the time. To transmit (talk), press the Push-To-Talk (PTT) button. To receive calls, release the PTT button. Transmitting more than 50% of the time may cause RF exposure compliance requirements to be exceeded.
- Hold the radio in a vertical position in front of the face with the microphone (and other parts of the radio including the antenna) at least 1 in. (2.5 cm) away from the nose or lips. The antenna should be kept away from the eye.
- When worn on the body, always place the radio in a Motorola Solutions-approved clip, holder, holster, case, or body harness for this product.
- DO NOT hold the antenna when the radio is transmitting.
- DO NOT use any portable radio that has a damaged antenna. If a damaged antenna comes into contact with your skin, a minor burn can result.
- To ensure continued compliance with applicable RF exposure limits, use only Motorola Solutions approved, supplied or replacement antennas, batteries, and accessories. ·
- For a list of Motorola Solutions-approved accessories please refer to your user manual or visit www.motorolasolutions.com
Acoustic Safety
Exposure to loud noises from any source for extended periods of time may
temporarily or permanently affect your hearing. The louder the volume of the
radio, the sooner your hearing will be affected. Hearing damage from loud
noise is sometimes undetectable at first, and can have a cumulative effect.
To protect your hearing:
- Use the lowest volume necessary to do your job.
- Turn up the volume only if you are in noisy surroundings.
- Turn down the volume before adding a headset or earpiece.
- Limit the amount of time you use headsets or earpieces at high volume.
- When using the radio without a headset or earpiece, do not place the radio’s speaker directly against your ear.
Medical Devices
If you use a personal medical device, such as a pacemaker or hearing aid,
consult the manufacturer of your device to determine if it is adequately
shielded from RF energy. Your physician may be able to assist you in obtaining
this information.
Holsters Incorporating Magnets
Some Motorola Solutions holsters incorporate strong, neodymium magnets. If you
use a personal medical device, such as a pacemaker or hearing aid, consult the
manufacturer of your device to determine if it can be used in close proximity
to magnets. Your physician may be able to assist you in obtaining this
information. Also be aware that magnets can damage other products, including
cell phones, computers, hard drives, and other electronic devices, as well as
credit cards and magnetic media. Keep the holster away from any mechanical
device that could be affected by a magnetic field. Consult the manufacturer of
your product to determine if your device or product can be used in close
proximity to magnets.
Notice to Users (FCC)
This device complies with Part 15 of the FCC rules per the following
conditions:
- This device may not cause harmful interference.
- The device must accept any interference received, including interference that may cause undesired operation.
- Changes or modifications made to this device, not expressly approved by Motorola Solutions, could void the authority of the user to operate this equipment.
Operational Warnings
The following explains the operational warnings:
For Vehicle With Air Bags
Warning:
- Refer to the vehicle manufacturer’s manual prior to installation of electronic equipment to avoid interference with airbag wiring.
- DO NOT place a portable radio in the area over an air bag or in the airbag deployment area. Air bags inflate with great force. If a portable radio is placed in the air bag deployment area and the airbag inflates, the radio may be propelled with great force and cause serious injury to the occupants of the vehicle.
Potentially Explosive Atmospheres
Warning:
- Do not carry a radio that is not certified for Hazardous Locations into a potentially explosive atmosphere. It could result in a serious injury or death. You should only use a radio certified for hazardous locations in potentially explosive atmospheres.
- Explosive atmospheres refer to hazard-classified locations that may contain hazardous gas, vapors, or dust, such as fueling areas below decks on boats, fuel or chemical transfer or storage facilities, and areas where the air contains chemicals or particles such as grain, dust, or metal powders. Areas with potentially explosive atmospheres are often, but not always, posted.
- DO NOT remove, install, or charge batteries in such areas, or remove or install antennas. Sparks in a potentially explosive atmosphere can cause an explosion or fire resulting in bodily injury or even death.
Blasting Caps and Blasting Areas
Warning: To avoid possible interference with blasting operations, turn
off your radio when you are near electrical blasting caps, in a blasting area,
or in areas posted: “Turn off two-way radio.” Obey all signs and instructions.
Batteries
- Caution: Use only Motorola Solutions-approved batteries. Risk of explosion if the battery is replaced by an incorrect type.
- Charge your battery using the approved Motorola Solutions charger.
- Connect the charger/power supply to a nearby and easily accessible power outlet.
- Use the battery in accordance with its water and/or dust Ingress Protection (IP) rating.
- Do not discard your battery into a fire.
- Do not replace the battery in any area labeled “Hazardous Atmosphere”.
- Do not disassemble, crush, puncture, shred, or otherwise attempt to change the form of your battery.
- Do not dry a wet or damp battery with an appliance or heat source, such as a hair dryer or microwave oven.
- Do not allow conductive material such as jewelry, keys, or beaded chains to touch exposed battery terminals.
- Do not dispose of batteries with household waste.
Repair
Warning:
- Repairs to a Motorola Solutions intrinsically safe radio product certified by, for example, FM, UL, CSA, or CENELEC, should only be done at a location that has been audited under the certifying body’s repair and service standard.
- Contact Motorola Solutions for assistance regarding repairs and service of Motorola Solutions’ intrinsically safe equipment.
A repair constitutes something done internally to the unit that would bring it
back to its original condition.
Items not considered as repairs are those in which an action is performed on a
unit that does not require the outer casing of the unit to be opened in a
manner that exposes the internal electrical circuits of the unit.
Do Not Substitute Options or Accessories
The Motorola Solutions communications equipment certified as intrinsically
safe by the approving agency (FM, UL, CSA, CENELEC) is tested as a complete
system that consists of the listed agency Approved portable, Approved battery,
and Approved accessories or options, or both. This Approved portable and
battery combination must be strictly observed. There must be no substitution
of items, even if the substitute has been previously Approved with a different
Motorola Solutions communications equipment unit. Approved configurations are
listed by the Approving Agency (FM, UL, CSA, CENELEC).
The Intrinsically Safe Approval Label affixed to a radio refers to the
intrinsically safe classification of that radio product and the approved
batteries that can be used with that system. The manual PN referenced on the
Intrinsically Safe Approval Label identifies the approved Accessories and or
options that can be used with that portable radio unit. Using a non-Motorola
Solutions-intrinsically safe battery and/or accessory with the Motorola
Solutions approved radio unit will void the intrinsically safe approval of
that radio unit.
European Union (EU) Waste of Electrical and Electronic
Equipment (WEEE) Directive
The European Union’s WEEE directive requires that products sold in EU
countries must have the crossed-out trash bin label on the product (or the
package in some cases). As defined by the WEEE directive, this cross-out trash
bin label means that customers and end-users in EU countries should not
dispose of electronic and electrical equipment or accessories in household
waste. Customers or end-users in EU countries should contact their local
equipment supplier representative or service center for information about the
waste collection system in their country.
For Brazil, for information on the disposal and recycling of electronic waste, batteries, and packaging, please call: 0800168272.
MOTOROLA, MOTO, MOTOROLA SOLUTIONS, and the Stylized M logo are
trademarks or registered trademarks of Motorola Trademark Holdings, LLC and
are used under license.
All other trademarks are the property of their respective owners.
© 2004 and 2020 Motorola Solutions, Inc. All rights reserved.
Printed in
Documents / Resources
|
MOTOROLA SOLUTIONS 89FT7136 Wave Two-Way
Radio
[pdf] User Guide
89FT7136, AZ489FT7136, 89FT7136 Wave Two-Way Radio, 89FT7136, Wave Two-Way
Radio
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>