CAMERON AMZ10W Outdoor HD Camera User Manual
- June 5, 2024
- Cameron
Table of Contents
CAMERON AMZ10W Outdoor HD Camera
IN THE BOX
PRODUCT DETAILS
App Download &Wi-Fi Connection
-
Device Setup Download the Cam Sees App and open it. Use the Set Up Wizard to connect to your Wi-Fi network and follow the steps to finish installation.
-
From your smart device or tablet, DOWNLOAD and INSTALL the free Cam Sees App.
-
Add antenna and plug camera into an electrical outlet (allow the camera up to 90 seconds to start up).
-
Now, LAUNCH the Cam Sees App and the Setup Wizard will appear.
-
Tap to start the Wizard and then tap Add Device.
-
Tap New Device and the unit will start searching.
NOTE: If the mobile device’s Bluetooth is not turned on, a message will appear requesting to have the Bluetooth setting turned on. -
Select your home network from the menu, and then enter your home network’s Wireless Password. If you get an error, make sure to enter the correct password and repeat.
-
At the next screen enter a New Password Security Code twice. Tap SAVE.
TIP: Remember to write down your new password and save it somewhere safe and easy for you to access. -
Tap the PLAY icon or preview picture for live video.
-
-
Screw the Antenna clockwise into the rear of the camera.
-
Secure the multi-position Camera Stand to a stable Surface or wall using the three screws. If needed, three anchors are also included. It should be lookin good.
NOTE: when the tightening ring on the stand is loosened, the multi- postion ball can pivot and rotate freely. Tighten when in desired position. -
Connect the small end of the AC adapter to the camera’s AC-in Plug located at the end of the bracket. You’re almost there.
-
Plug into electrical outlet when ready to install Cam Sees App.
TIP: A 6 foot power extension cable is included for your camera setup if needed. -
To record videos you must inserta microsD card, not included. The microSD slot is located under the flap on the rear of the camera.
NOTE: A Class 10 microsD card is required. This camera supports up to
128GB microSD card.
CLOUD: When an SD card is inserted and the Cloud option is activated (in
Advanced Settings) recorded videos will automatically be transferred onto the
cloud, i.e, Google Drive.
good stuff to know
- Tap Snapshot icon to save image to camera roll or gallery
- Tap to Record to MicroSD card (pre-installed)
- Tap Settings icon from home page to access Advanced Settings and Customizing Features.
- Tap to turn volume ON or 0FF in Live View Mode
- Smart motion detection push notification alerts
- Tap to RETURN icon to go back to main page
- Tap to EVENT icon to review recorded files.
Advanced Settings
CAUTION: Do not submerge camera in water, STRANGULATION HAZARD: Infants have strangled in power cords. Keep power cords more than 3 feet away from cribs. When using your equipment, always follow basic safety precautions to reduce the risk of fire, electric shock andinjury to persons. Illustrations are for reference only. Actual product specifications may vary.
For additional precautions and product information, please see owner’s manual at CameronCameras.com
FCC Compliance Statement: This device complies with Part 15 of the FCC rules. Operation is subjected to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Warning
This device complies with part 15 of the FCC rules. Operation i subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any inte rference received, including
interference that may cause undesired operation. Changes or modifications not
expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interferenceto radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>