KIOSK 43 Inch Android System Floor Standing Advertising Machine Instruction Manual
- June 3, 2024
- Kiosk
Table of Contents
KIOSK 43 Inch Android System Floor Standing Advertising Machine
Operating Instruction
Note: The cabinet packing case does not contain a power supply
Product feature
This product issuitable for charging and control cabinets that provide shared
charging services for guests inpublic places and stores .
The front of the product has a 23.8-inch LCD display screen .
Item Specification
| productname | 43 inch advertisingmachine |
|---|---|
| model | YBT-001 |
| size | 720mm（L）545mm（W）1930mm（H） |
| screen | 43 inch |
| communication support | 4G WIFI 2G |
| stationinputvoltage | 220V/50hz |
| Maximumstationinputcurrent | 2.41A（fullload) /0.73A（standby ） |
| Ratedcabinetpower | Charging status of the power bank) |
| ACpoweradapterinput | 100Vac-240Vac（60Hz/60Hz） |
| power output | 5V1.5A*45 |
Component Name
(Mainboard Model) : RK3288A
CPU：RK3288,
(Quad -core)
(main frequency)1.8GHz Android 5.1.1
Component Name
HOW TO USE
First time to electricity
- Connect the AC power cord to the AC power socket on the back of the cabinet. Turn on the power switch
- Connect the AC cord to the power outlet .
- The 3.43-inch screen lights up to start the Android screen and enter the advertising interface .
- After automatically connecting to the network, the indicator light of the hole position with the power bank is always on, and the indicator light of the hole position without the power bank is off.
Renting power bank
- There is a sticker prompt on the front of the consumer cabinet, and download the APP.
- After installing the APP, scan the QR code on the front of the cabinet, and follow the prompts to register and pay the deposit.
- The power bank pops up from the cabinet, and consumers take out the power bank and start using it.
- When the charging treasure is in the concession, the system will randomly pop up the charging treasure with the highest power of the charging treasure.
Return power bank
-
Consumers find a nearby outlet, insert the charging treasure contacts into the cabinet towards the hole of the charging station, and press in the end.
-
After the power bank is returned normally, the indicator light of the corresponding hole in the cabinet is always on.
Prove the successful return of the power bank -
The consumer APP prompts that the return is successful, and calculates the rental fee and the refund of the deposit according to the return time of the loan.
-
Returning the power bank will establish serial communication with the main board of the cabinet. After the communication handshake protocol is consistent, the charging module will be activated to charge the power bank until the power of the power bank is 100%, and the charging will be stopped.
Fault and handling methods
| fault phenomenon| fault cause| handling method
---|---|---|---
1| Plug in the power cor,d the display screen and indicat or light are not
working| plug is not firmly inserted| Insert tightly or replace
the plug
2| The power bank pops out immediately
after being inserted into the cabinet| Failed to detect the
power bank
| Clean the charging pad and try to return it again
network anomaly| Re-plug the power supply and reconnect the network
3| After the power bank is returned,the APP does not receive a successful
return message| network anomaly| Plug in the power again,reconnect the
Internet or contact customer service to receive the end of the order
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2)
this device must accept any interference received, including interference that
may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.
Packing details
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>