HOME EXPRESS Sunset Lamp Projector User Manual
- June 10, 2024
- HOME EXPRESS
Table of Contents
HOME EXPRESS Sunset Lamp Projector
Remote Control
This remote control complies with part 15 of the FCC Rules. This means that it
has been tested and found to meet the guidelines for a Class B digital device.
It is designed to work with the specified equipment and should not cause
harmful interference when used properly. Additionally, it is required to
accept any interference received, including interference that may cause
undesired operation.
Please note that any changes or modifications to the remote control that have
not been expressly approved by the party responsible for compliance may void
the user’s authority to operate the equipment. It is important to follow all
usage instructions provided by the manufacturer to ensure proper operation and
compliance.
Product Usage Instructions
- Ensure that the remote control is pointed directly at the device you wish to control.
- Make sure that there are no obstructions between the remote control and the device.
- Press the desired button on the remote control to activate the corresponding function on the device.
- For best results, keep the remote control within a reasonable distance from the device and use it in a well-lit area.
- Replace the batteries in the remote control as needed, following the instructions provided by the manufacturer.
- Do not attempt to modify or disassemble the remote control in any way, as this may result in damage or malfunction and void the user’s authority to operate the equipment.
By following these usage instructions and using the remote control properly, you can enjoy convenient and effective control of your electronic devices.
Product Information
Remote control
Controller Description
- The “M+” and “M-” buttons on the controller can switch 21 colors and 1 gradient mode as shown on the left (the gradient mode color order is the same as the 21 color order)
- For example, if the initial light is red, press the “M+” key for the 21st time, and the light will become a gradient mode, press the “M+” key for the 22nd time, the light becomes the initial light color red, and so on.
How to Download App “ZENGGE”
- Search for “ZENGGE” or scan the QR code below to Install the app, which supports Android and IOS
How to use the App “ZENGGE” to connect the Sunset Light Projector.
- Step 1. Plug the USB port of Sunset Light into a rechargeable battery or USB power device.
- Step 2. Open the “ZENGGE” app and authorize the app to use your location information and turn on your phone’s Bluetooth.
- Step 3. Wait for the app to connect to the Sunset Lamp Projector automatically.
Description of APP ZENGGE
FCC
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- this device must accept any interference received, including interference that may cause undesired operation.
- Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help