ITC 21055 VersiControl Zone Controller User Guide
- June 3, 2024
- ITC
Table of Contents
- 21055 VersiControl Zone Controller
- Additional Resources
- INITIAL SETUP – FINDING DEVICES
- ZONE DASHBOARD OVERVIEW
- CONTROLLING ZONES
- CHANGING COLOR
- SELECTING COLOR WITH CAMERA FEATURE
- SPECIAL EFFECTS MODE
- MUSIC-BEATS CONTROLS
- ZONE BUTTON CONTROLS
- BRIGHTNESS CONTROLS
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
VersiControl TM Quickstart Guide
How To Control Your VersiColor TM RGB(W) Lighting
OCT2022 VersiControl TM by ITC Inc, Hudsonville, MI
21055 VersiControl Zone Controller
App Controller Quickstart
- App Home Screen Overview
- Settings
- Controlling Zones
- Changing Color
- Quick White Controls
- Color Special Effects
- Music-Beats Control
- On/Off Timer Controls
Pad Controller Quickstart
- Pad Button Overview
- Zone Control Buttons
- Color Mode
- Fade Mode
- Brightness Mode
- Saving Settings
Additional Resources
| DOWNLOAD THE APP Search: ITC VersiControl
|
---|---|---
| FREQUENTLY ASKED QUESTIONS
Located within the App’s settings as well as: itc-us.com/versicontrol-help-
support|
https://www.itc-us.com/versicontrol-help-support
| SUPPORT CONTACT FORM
Can’t find an answer, send us your question. itc-us.com/versicontrol-help-
support|
https://www.itc-us.com/versicontrol-help-support
INITIAL SETUP – FINDING DEVICES
Upon starting the VersiControl App for the 1st time, you will encounter a
series of set-up screens to find and connect to your control devices. 
ZONE DASHBOARD OVERVIEW
CONTROLLING ZONES
CHANGING COLOR
SELECTING COLOR WITH CAMERA FEATURE
SPECIAL EFFECTS MODE
MUSIC-BEATS CONTROLS
CONTROLLING ON/OFF TIMER
NOTE: Once activated, the timer will remain active without the presence of the phone until the time expires
PAD CONTROLLER OVERVIEW
POWER/QUICK WHITE/ARROWS FUNCTION
ZONE BUTTON CONTROLS
The zone buttons labeled 1 – 4 controls the states of an individual zone. The LED behind each zone button indicates what state the zone is currently operating in: Off State, On state, and Adjust state
-
OFF STATE
The indicator LED behind the zone number is off and the zone is off. All lights connected to that zone are powered off -
ON STATE
The indicator LED behind the zone number is on and solid. The zone is powered on and the lights are turned on in the selected zone -
ADJUST STATE
The indicator LED behind the zone number is blinking and the zone is in adjust mode. Selecting one of the 3 mode buttons ( Color, Effects, Brightness ) will place the zone into that mode. ( There is a 30-second timeout if no adjustments are made )
CHANGING COLOR
Changing Color in Selected Zones
- Press the zones in which you plan to change the LED color. The LED behind each zone will blink indicating that zone is in adjusted the mode
- Press the Color Mode button to put the keypad in color adjust mode
- Press the ← → buttons to cycle through the available RGB color options. There are 21 possible color selections using the controller pad
- The center color indicator will change to display the selected color
- Once the desired LED color has been determined, press each of the zone buttons that are currently in adjust mode again to end adjust the mode
EFFECTS MODE CONTROLS
Controlling Zone Effects
- Press the zones in which you plan to enable the LED color change fade effect. The LED behind each zone will blink indicating that the zone is in adjusted the mode
- Press the Effects Mode button to put the keypad in effects adjustment mode
- Press the ← → buttons to decrease or increase the speed of the seven-color fade effect
- The effect fades between seven colors: yellow, white, cyan, blue, red, purple, green
- Once a desired LED fade speed has been determined, press each of the zone buttons that are currently in adjust mode again to end adjust the mode
Note: The center color indicator will not change color
BRIGHTNESS CONTROLS
Controlling Light Brightness
- Press the zones in which you plan to adjust the LED light brightness. The LED behind each zone will blink indicating that the zone is in adjusted the mode
- Press the Brightness Mode button to put the keypad in brightness adjust mode
- Press the ← → buttons to decrease or increase the brightness of the light output
- Once a desired LED brightness has been determined, press each of the zone buttons that are currently in adjust mode again to end adjust the mode
Note: To adjust the brightness of the pad itself, press the brightness adjust mode button (without any zones selected) and use the arrows to adjust the pad’s brightness as desired.