JVC RIPTIDZ True Wireless Headphones with Touch Sensor Operation-Complete Features/User Manual
- June 5, 2024
- JVC
Table of Contents
JVC RIPTIDZ True Wireless Headphones with Touch Sensor Operation
Specifications
- BRAND : JVC
- COLOR :` Blue
- CONNECTIVITY TECHNOLOGY : Wireless
- MODEL NAME : RIPTIDZ True Wireless
- FORM FACTOR : In Ear
- PACKAGE DIMENSIONS: 7.4 x 3.15 x 1.34 inches
- ITEM WEIGHT: 4.2 ounces
- BATTERIES: 1 Lithium-Ion battery
Introduction
Bluetooth 5.1 technology offers a stable connection with the JVC RIPTIDZ truly wireless earbuds. These JVC wireless headphones come with a small charging case and can play for up to 30 hours. They are water resistant to IPX5 standards.
WHAT’S IN THE BOX
- Headphones
- Cable
- Wireless Charging Case
- Ear Cushions
HOW TO SETUP
- Remove the tape from both earphones and re-insert them into the case. Pick them up one more to activate them.
- Search for JVC HA-A17T on the device and touch to connect. When you pick up the earbuds from the case once they’ve been paired, they’ll automatically turn on.
HOW TO RESET
- To switch off the power, press the button on both earbuds.
- For around 20 seconds, press and hold the L earphone’s button.
- For around 20 seconds, press and hold the R earphone’s button.
- Remove both earbuds from the charging case and place them back in.
HOW TO PAIR
Hold the L (left) and R (right) earphone buttons for around 3 seconds. You can hear the device’s power while the L and R earbuds are on. Bluetooth will now be available on the BLUETOOTH device.
Frequently Asked Questions
-
When JVC headphones are fully charged, how do you know?
The earphones’ indicators will turn off when the charge is finished. The earphones take around 2 hours to charge. The power of the earphones will automatically cut off once they are inserted into the charging case. -
What is the best way to tell if my JVC Bluetooth headphones are charging?
1Take off the cover. 2To begin charging, connect the charging wire provided. The signal becomes red, and the charging process begins. The indicator turns off when the charge is finished. -
What’s the deal with my JVC headphones flashing red?
The connection between the System and the BLUETOOTH device is not formed if the indicator flashes slowly in red. Select System on the BLUETOOTH device to connect in this scenario. -
What is the best way to increase the volume on my JVC earbuds?
To increase the volume, push the R earphone’s button twice quickly. To reduce the volume, push the L earphone’s button twice quickly. -
What’s wrong with one of my JVC earbuds?
Switch on the system after recharging it. Remove the earphones from the charging case and re-insert them. Make sure the earbuds are fully inserted into the charging case before closing it. Remove any dirt from the earphones’ and charging case’s contacts using a cotton swab. -
On JVC earbuds, how do you skip songs?
A double-tap on the screen will skip the music. A triple tap will take you back to the start of the song and play it again. -
What is the best way to charge JVC earbuds?
Take out the charging case and open it. 2Insert the L and R earphones into the charging case correctly and securely. During charging, the earphones’ indicator lights up red, and the charging case’s indicator lights up or flashes white. -
What does the earphones’ button do?
If the headset contains volume control buttons, press them to adjust the volume. The volume should increase steadily each time the volume-up button is pressed until the maximum volume is reached. The volume should progressively increase to the highest volume level if the volume-up button is pressed and held. -
What is the best way to tell if my earbuds are fully charged?
The light indicates the charge status of your AirPods if they are in your case and the lid is open. The light indicates the status of your case when your AirPods aren’t in it. Green indicates that the battery is completely charged, while orange indicates that there is less than one full charge left. -
What is the best way to connect both earbuds at the same time?
Double-click each earpiece at the same time, make sure your phone’s Bluetooth is switched off, and they should link. Wait a few seconds, then turn your Bluetooth back on.