KPR Night Light Bluetooth Speaker, Portable Wireless Bluetooth Speakers-User Guide

KPR Night Light Bluetooth Speaker, Portable Wireless Bluetooth Speakers

Specifications

• SPEAKER TYPE: Outdoor
• SPECIAL FEATURE: Dimmable
• CONNECTIVITY TECHNOLOGY: Bluetooth
• POWER SOURCE: Battery Powered
• MATERIAL: ABS
• PACKAGE DIMENSIONS: 5.12 x 4.06 x 4.02 inches
• ITEM WEIGHT: 9.5 ounces
• BLUETOOTH RANGE: 10 meters

Introduction

It is a table lamp, a child’s nightlight, an SD card music player, a hands- free speakerphone, a wireless Bluetooth speaker, and an LED mood lighting with touch control. With the KPR Bluetooth Speaker, you can experience the music like never before. From wall to wall, this portable speaker blasts out clear treble, finely detailed mids, and powerful bass. It is a totally unmatched audio experience. Because of the noise reduction software, the built-in microphone offers exceptional hands-free functionality.

By tapping the speaker mesh, you may get a 3 level warm light mode. By tapping and holding the speaker mesh, the color light mode can be activated instantly. Through Bluetooth connectivity and audio streaming, the LED color theme has six different color-changing light modes and flashes in time with the music.

HOW TO SETUP

• From the top of the screen, swipe downward.
• Touch Bluetooth and hold it.
• To pair a new device, tap. If Pair new device isn’t there, go under “Available devices” or hit More. Refresh.
• Select the Bluetooth device you want to associate with your device by tapping its name.
• Observe any directions displayed on the screen.

HOW DO I FIX THE BLUETOOTH PAIRING PROBLEM

• Restart Bluetooth after turning it off. Learn how to activate and deactivate Bluetooth.
• Verify that your gadgets are connected and linked. Discover Bluetooth pairing and connection techniques.
• Restart your electronics. Find out how to restart your Pixel or Nexus phone.

HOW TO CONNECT

• Your mood light speaker has a rechargeable battery built inside it so you can use it anywhere.
• Connect the included USB cable to the USB port on your mood light speaker to begin charging it.
• The other end of the USB wire should be connected to a 5V 1A USB wall charger or a USB port on your computer.

FAQs

• How can I tell when the battery in my Bluetooth speaker is full?
  If the battery is fully charged, the CHARGE indicator won’t turn on. Depending on the model, the speaker’s CHARGE indication could not turn on while it is being charged. The CHARGE indicator will turn on if the battery is charging while the speaker is off.

• Why won’t my Bluetooth pair?
  Go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile, & Bluetooth on Android devices. For iOS and iPadOS devices, you’ll need to unpair every device first, then restart your phone or tablet by going to Settings > Bluetooth, selecting the info icon, then selecting Forget This Device for each device.

• How can my Bluetooth speaker be reset?
  You should only need to do this briefly with most Bluetooth speakers. The power and Bluetooth buttons must be pressed and held simultaneously in order for almost every Bluetooth speaker to be reset.

• How can I set my small hifi’s time?
  When the time begins to flash on the display, press and hold the CLOCK button on the remote control. The 12 hour and 24 hour clock modes can be switched by continuously pressing PROGRAM. To set the hour, push the REW or FWD button, and to set the minutes, press the RREV or NEXT button.

• How long should my Bluetooth speaker be charged?
  How much time does it take Bluetooth speakers to charge? The charging process for speakers using AC mains power typically takes 6 to 8 hours. A USB- charged speaker will take about 3–4 hours to completely charge.

• What happens if a Bluetooth speaker is overcharged?
  No, as soon as the charger and battery reach balance, the device will cut off the charging circuit.

• How long does a new Bluetooth speaker take to charge?
  The Bluetooth® speaker’s internal battery needs three (3) hours to fully recharge from a dead battery.

• What does the red Bluetooth light mean?
  Your headphones’ red or amber flashing usually indicates that the battery is getting low.

• Why is my Bluetooth red and blue blinking?
  It is in pairing mode and needs to connect to your device if the red or blue flashes. If you continue to hold down the power button after it has turned on for a second, this may occur.

• How can I make my Bluetooth speaker’s LED turn off?
  To turn the lighting function on or off, press and hold the BATT (battery) button and LIGHT button inside the speaker’s cap for around 3 seconds. The lighting function can be turned back on/off by pushing and holding the button for an additional three seconds.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>