JVC XS-N5320PBBA DVD SPEAKER SYSTEM WITH BLUETOOTH User Manual

JVC XS-N5320PBBA DVD SPEAKER SYSTEM WITH BLUETOOTH User Manual

Safety Information

Safety Information and Maintenance

Read the instructions fully before use. Retain this Instruction Manual for future reference.

Important :

• This device is not a toy. Do not allow young children to play with the unit.
• When moving the unit, make sure that the power is turned off and the cord is removed from the power outlet.

Disc Protection

To clean a dirty disc, you should use a clean rag and clean it in a linear way.

Keep the player, battery and disc away from environment with moisture, rain, dust or high temperature. Keep the disc tray closed so as to avoid dust.

When the player is suddenly moved from a cold environment to a warm one, water can be condensed on the lens of the player, which may lead to a problem. In this case, put the player in the warm environment till the condensed water on the lens is totally evaporated.

When the system works for a long time, the panels at the top and bottom of the device will be warm.

When the device is not used, take out the disc and unplug the power cord.

If it is not used for a long time, the system may malfunction or its performance becomes deteriorated. For that reason, the device should be operated occasionally.

Do not place foreign objects onto the disc tray.

Operating Environment

Do not put the device in an environment with: Heat source or enclosed space (like in a car);

High temperature (≥40℃) or high humidity (≥90%);
Dirt;
Direct sunshine.

Interference

Keep the device away from TV, radio and video recorder so as to avoid distorted image or sound.

Condensed Water

Condensed water may appear on the device in the cases below:

When it is moved from cold environment to a warm one;

When it is used in a space with a running air conditioner system and the cold air contacts the device;

When it is in a room with too much steam or high humidity.

A device with condensed water may not work properly. In this case, you can plug the power cord and keep the machine running idle for about 2-3 hours. The water should evaporate after a while.

Disc Protection

Do not stick tape or paper onto the disk.
To clean a disk, use a moist rag first, then a dry rag.
To avoid damage to the device, do not apply any soluble substances, such as benzine and anti-static spray with ethylene-based substance, to the disk.

Structure of Disc Contents

Normally, the digitalized video disc comprises of different titles that are made up of chapters.
Audio disc is made up of tracks

Each title, chapter and track has a number, respectively called title number, chapter number and track number. But some discs may not have such numbers.

Accessories

• Remote control
• FM antenna
• AV cable
• Wired microphone
• User manual

System Connection

Please refer to the drawing below for system connection to a TV. Do not plug the power cord before the connection is completed.

Note :

1. Make sure the source cables are properly connected.
2. Make sure the power cord is unplugged before removing or inserting the connecting cables. Otherwise, the device or other parts may be damaged.

Note : To listen to FM, first connect the FM antenna provided to the port named ‘FM ANT’.

Product Overview

Remote Control Function Keys

Note : The remote control uses 2 x ‘AAA’ batteries (included). Please ensure correct polarities when inserting batteries.

Important : The Power Button on the remote control will work only when the On/Off Switch on the rear of the unit is in the On position.

1 POWER
2 OPEN/CLOSE
3 PLAYBACK CONTROL (PBC)
4 NUMBER BUTTONS
5 PROGRAM
6 CLEAR
7 RETURN
8 GOTO
9 DVD/USB (Switch between DVD and USB)
10 SETUP
11 UP
12 LEFT
13 ENTER
14 RIGHT
15 DOWN
16 TITLE
17 MENU
18 STOP
19 PLAY/PAUSE/SCAN(Long press to auto searching on Radio Mode)
20 PREV/CH-
21 REV/FM-
22 VOL+
23 VOL-
24 NEXT/CH+
25 FWD/FM+
26 L/R
27 N/P
28 SOURCE (Switch between DVD/USB/FM/AUX/BT)
29 OSD
30 SLOW
31 ANGLE
32 A-B
33 ZOOM
34 REPEAT
35 SUBTITLE
36 RESET
37 MUTE
38 COPY/DEL
39 LANGUAGE

Overview of the Equipment

Playing a disc
Once a disc is loaded, the player will start playing automatically.
1. if a disc is a DVD, the player will show the DVD menu or title menu.
2. if the disc is a VCD2.0,the player will activate PBC playback control status.
3. If the disc is a CD, the player will start playing the CD in sequence.

NOTE: If the screen is black/white or scrolling up and down, press N/P on remote to toggle between NTSC and PAL.

Basic playback controls

Preparation
To watch the disc contents, turn on the TV, connect AV or HDMI cable to TV and device, and change the TV system to AV or HDMI code.

1.PLAY/PAUSE
Press the power button to start the device. At this time, the screen LED will be illuminated. Words “no disc” will appear on the screen if disk not inserted. If disc is inserted, the device will play the disk automatically.

2. PREV /NEXT
IN CD/DVD/USB mode: Press to go to the previous or next song/channel/chapter.
IN FM mode: Press to play previous or next station(can store 20 stations).
In Bluetooth mode: Press to play previous or next song.
IN LINE in Mode: These buttons have no effect in this mode, use the controls on the auxiliary device.

3. REV /FWD
In CD/DVD/USB mode: Press to reverse or fast forward through the disc 2x,4x,8x,20x or back to normal playback speed.
In FM mode: Press to go to the next or previous available FM station.
In Line in/Bluetooth mode: These buttons have no effect in these modes.

4. STOP
In DVD/USB/BT mode: Press to stop play.
IN FM mode: Press to automatically scan the channel, press again to automatically play the first saved station.
In Line in mode: This button has no effect in this mode.

Note :
Use remote control to operate the features described throughout this manual.

Advanced functions

OSD
In DVD playback: Press OSD on the remote control to display single elapsed time, single remaining time, total elapsed time, total remaining time and other information about the disc.
IN VCD playback: Press OSD on the remote control to display single elapsed time, single remaining time, display off and other information about the disc.

N/P
Press N/P to toggle between NTSC,PAL,AUTO.

Subtitle
Press Subtitle button to display the subtitles when watching movies/recordings on multi-subtitle encoded discs, you can choose from 32 languages.(This function only works with multi-subtitle encoded discs).
Press SUBTITLE Button again to turn off subtitles.

Angle
Press Angle repeatedly to view the same image from different angles when watching sports, musical or theatrical programs on multi-angle encoded discs
(This function only works with multi-angle encoded discs).

Language
Press language to display the languages for selection when watching movies/recording on multi-language encoded discs. You can choose from 32 languages.(This function only works with multi-language encoded discs.)

Title
Press TITLE to display the title menu when watching movies/recordings on multi-title encoded discs(This works with multi-title encoded discs).

Menu
Press to return to the main DVD playback menu(This works with multi-chapter encoded discs).

1. When playing SVCD, press MENU to display the menu on screen.
2. When playing VCD 1.1,CD disc and MP3,this button has no effect.
   Press numerical buttons to select the track.

PBC

1. When playing VCD 2.0, press PBC to return to the PBC playback menu.
2. When playing SVCD, press PBC to display the menu on screen. After loading the disc, the unit will enter PBC ON automatically.
3. When playing VCD 1.1,CD disc and MP3, press PBC and PBC OFF will be displayed on TV screen.
   Press numerical buttons to select the track.

Direction keys
On playing discs, use the UP/DOWN/LEFT/RIGHT arrows to select options in the title, menu and setup.

REPEAT
When playing DVD discs, press REPEAT and select one from the options.
Repeat chapter, repeat title, repeat all, repeat off.
When playing DVD discs, press REPEAT and select one from the options.
Repeat track, repeat all, close repeat.
When playing audio CDs, choose the particular song you want to be repeated,
Then press REPEAT and choose one from the options: Repeat single, repeat folder, cancel repeat.

A-B
Press A-B to set the initial starting point(A);Press it again to set the end point(B).
The unit will now repeat playback between your set points (A) to (B).
Pressing A-B a third time will cancel the repeat settings.

Zoom
Press to zoom to 2x,3x,4x,1/2,1/3,1/4 of the image size and press the button once more to return to normal playback mode.

L/R
When playing discs in SVCD,VCD or CD format, press L/R to select one of the following options: Stereo, Mono L, Mono R, Mix Mono.

Volume and mute
Press VOL+ to increase the volume and VOL- to lower the volume.
Press MUTE to switch the sound on /off.

PROG
During playback, press PROG to enter program status, then enter the track numbers desired – for example 2, 4, 6 and 8 (you can press CLEAR to remove the numbers).

Use arrow keys to move the cursor to the PLAY icon. Press ENTER to start playing, press PROG again to exit.

SLOW
Press SLOW repeatedly to choose a level of slow motion from the following options 1/2,1/3,1/4,1/6,1/7 or normal.

CLEAR
When using the PROG or GOTO feature, press CLEAR to clear the input number.

OPEN/CLOSE
Press to open and close the disc tray.

GOTO
When playing DVD disc, press ‘GOTO’ button to display the screen and search the menu.
When playing SVCD/VCD/CD, press ‘GOTO’ to directly input a specific time.

RETURN
Press this key to return to the main menu (only for DVD discs).

SETUP
Press ”SETUP” button to select the various functions of your player, such as audio output, parental control etc.

SOURCE
Switch between Bluetooth/ DVD/ USB/ AUX and FM modes.

DVD/USB
Switch between DVD and USB modes.

RESET
Restore default settings.

COPY/DEL
Press this button to copy disc contents to a connected USB memory device.

Menu Options

Setup Options on System, Language, Audio, Video, Speaker and Digital can be accessed from the main setup menu.

1. Press SETUP on the remote control to display the main menu.
2. Press UP/DOWN arrows to move up or down to the menu, and then press ENTER to confirm the selection and move to submenu.
3. Press LEFT/RIGHT arrows to move the cursor and UP/DOWN to the desired option, and then press ENTER to confirm.
4. Press LEFT arrow to go to the previous menu.
5. Press SETUP button again to close the setup screen.

System Setup

CD ripping and Copy

Please make sure the removable USB device has enough memory space that can accept all contents from DVD Player.

CD Taking-In
In CD playback mode, press the COPY/DEL button on the remote control to display the CD ripping interface. Use the arrow buttons(UP,DOWN,LEFT,RIGHT) to move around on the screen and select the options, then press the ENTER button to enter the option/submenu or confirm your choice.

1. In the OPTIONS menu(see Fig.1) you can select a different speed or bitrate, or create or cancel a playlist.
2. In the TRACKS menu you can view the length of the tracks, Press the arrow buttons to select a track, then press ENTER to confirm your selection. To select (or unselect) all tracks, move the highlight to the box on top of the track box (see Fig.2) and press the ENTER button.
3. In the START menu(see FIG.3) you can follow the progress of CD-Ripping. Press the ENTER button to start the process(Fig.4). To cancel or change the speed, press the ENTER button.
4. At the end of the process, the screen will display RIPPING COMPLETE(Fig.5). Use the DOWN arrow button to select QUIT, then press ENTER to exit.

Copying from an MP3 disc to a USB device

• Play the Mp3 disc on the unit.
• Plug your USB device into the port on the top panel of the unit.
• Use the DOWN/UP/LEFT/RIGHT arrow buttons to move the cursor on the screen.
• Press the COPY button to copy the highlighted playback file.
• During the copying process, you can follow the copying progress on the screen.
• It will display COPY FILE 1%-100%.
• At the end of the copying process, the screen will display CLOSE FILE.
• At this point, you can repeat the above operations to continue copying files.

MP3 disc playback
When a disk with MP3 format is about to be played, the system will automatically display the navigation interface while the contents are being uploaded.

• In the navigation interface, use the key Up/Down to make options. After selection, press Enter/Play to play the file.
• In all the tracks, use the key Up/Down to make options. After selection, press Enter/Play to play the track.
• In the current interface, press the key Left to return to the previous menu, and press Previous/Next to enter the previous and next page.

JPEG(Picture CD) playback
When a disk with JPEG format is about to be played, the system will automatically display the navigation interface while the contents are being uploaded.

• In the navigation interface, use the key Up/Down to make options. After selection, press Enter/Play to play the file in a slide manner.
• Press Previous/Next to select the previous and next picture.
• Press Pause to allow the picture-playing pause so that you can view for a longer time. Press Enter/Play to return to the normal playing state.

Kodak Picture CD Disc Playback

When a disk with Kodak Picture format is about to be played, the system will automatically display the navigation interface while the contents are being uploaded.

• In the navigation interface, use the key Up/Down to make options. After selection, press Enter/Play to play the file.
• In all the tracks, use the key Up/Down to make options. After selection, press Enter/Play to play the track.
• Each picture of the Kodak Picture CD will be displayed as slide, whose size is automatically adjusted in accordance with the proportion of the TV.
• Press the key Main Interface to return to the main interface.
• Press Pause to pause play and the current picture will remain still.
• Press Previous/Next to view the previous and next picture.
• Press Enter/Play to return the slide mode. Note: The quality of the picture displayed is subject to the model of the device used for viewing.

Playing Radio functions

1. The frequency the embedded radio receiver in the system ranges from 87.50MHz~ 108 MHz.
2. Press the SOURCE button on the unit or the remote control repeatedly to switch to FM mode.
3. Press and hold the Play/Pause/Scan button on the unit or the remote control to search for available channels. Up to 20 stations can be saved into memory.
4. Press Previous/Next buttons to switch between the saved channels.
5. You can also use the Fast Forward and Fast Reverse buttons to manually scan for channels.

Multimedia

1. The System supports USB device(Max 32GB) and is compatible with files with such formats as JPEG, MP3, AVI and WMA.
2. Play contents in USB device: Contents in USB device can be played only when there is no disk or card inside the player. If so, the player will play the contents automatically after properly connected

AUX INPUT

1. Connect one end of a 3.5mm AUX cable to the LINE IN port on the unit, connect the other end to an auxiliary device like an mp3 player.
2. Now turn on and press the SOURCE button on the remote control to switch to “AUX”mode.

Operating Instructions of Bluetooth

Press the “SOURCE” button to switch the audio source to the “BT”(Bluetooth input) mode (make sure there are no obstacles between the machine and the connected device): BT name XS-N5320. Once pairing is successful, you will hear a beep.

Note: Bluetooth range is between 8 to 10 meters, make sure there are no obstacles between the unit and your device.

Troubleshooting

Refer to the table below for a few common problems and how to solve them. If you are still experiencing issues, contact Customer Service for assistance.

Specifications

Register your product at jvctv.com.au/warranty- registration

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>