EAC WL300 Smoke Pipe Cover With stones Instructions
- June 5, 2024
- EAC
Table of Contents
EAC WL300 Smoke Pipe Cover With stone
DIMENSION
Instructions for Installation of Smoke Pipe Cover
Before installation
- Make sure that the minimum safety distance requirements for stove, smoke pipe cover and chimney are fulfilled.
- If it is planned that the insulated part of the chimney will begin right on top of the smoke pipe cover, you should fill the smoke pipe cover with stones before installing the insulated part of the chimney.
Steps
- If you install the smoke pipe cover around an angled smoke pipe, cut a lead-through for the smoke pipe.
- Install the stove and pile stones in the stove according to instructions provided with the stove.
- Form an even layer of stones around the stove’s upper connection opening. The smoke pipe cover will stand on the stones.
- Pile ca 40 kg of large stones into the smoke pipe cover. Pile the stones as densely as possible. Make sure that the smoke pipe is not visible behind the stones after the stones are in place.
warning
Steps
warning
Minimum safety distances from walls and benches made of combustible materials
(provided that the stones have been piled carefully – stones must cover the
stove body and smoke pipe completely!)
P.O.Box 12
Teollisuustie 1-7
40951 Muurame
FINLAND
+358 207 464 000
harvia@harvia.fi
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>