DBI 3500243 Nano Lok Sharp Edge Safety Leg Instructions
- June 3, 2024
- DBI
Table of Contents
DBI 3500243 Nano Lok Sharp Edge Safety Leg
WARNINGS
- Please read all instructions carefully before use and retain for future reference.
- Maximum
- Estimated assembly time
- Do not use power tools to assemble
- Do not climb on
- Do not jump on
- Re-tighten fixings every 6 months
- Relocation. Never drag the item. This may cause damage to fixtures and make the item unstable. Disassemble where appropriate.
- Re-tighten fixings every 6 months
INTENDED USE
This product is not intended for indoor use. This product is not intended as a climbing structure and it is not a toy. Children should be supervised to ensure that they do not play with the product.
BEFORE FIRST USE
Follow each step of the assembly as outlined by the steps in this Instruction Manual. Assemble close to the products intended position. Locate the product in a suitable area where it will not create an obstruction. Locate away from sources of combustion.
GENERAL SAFETY
The assembly pack may contain small parts which can pose a choking hazard to children and pets. Place on solid and even ground. Only use in an upright stable position. Do not overload the product as this may result in damage to the product or personal injury.
CLEANING & MAINTENANCE
Do not clean the product with any abrasive cloths or chemicals. Solvents or detergents can cause damage to the surface. Periodically check and re-tighten fittings where necessary. Re-tighten all fittings after the first week following assembly. To clean, sponge down with warm water, a soft cloth and mild detergent. Ensure you have all the pieces listed. If you are missing any components, contact our customer
services department at: support@domu.co.uk
DO NOT proceed with assembly if any components are missing.
ASSEMBLY
- Top Pole
- Bottom Pole
- Centre Leg
- Leg
- Balance Bar
- M5x35mm
- M5x15mm
- M4x25mm
- M4 Nut
- Base Connector
- Head Clamp Connector
- Pole Connector
- Head Clamp
- Balance Bar Straps
- Feet
- Accessory Tray
- Hex Key 4mm
- Hex Key 5mm
DISPOSAL INFORMATION
- Please recycle where facilities exist. Check with your local authority for recycling advice.
CUSTOMER SERVICE
- If you are having difficulty using this product and require support, please contact support@domu.co.uk
WARRANTY
To register your product and find out if you qualify for a free extended warranty please go to www.vonhaus.com/warranty. Please retain a proof of purchase receipt or statement as proof of the purchase date. The warranty only applies if the product is used solely in the manner indicated in the warnings page of this manual, and all other instructions have been followed accurately. Any abuse of the product or the manner in which it is used will invalidate the warranty. Returned goods will not be accepted unless re-packaged in their original packaging and accompanied by a relevant and completed returns form. This does not affect your statutory rights. No rights are given under this warranty to a person acquiring the appliance second-hand or for commercial or communal use.
COPYRIGHT
All material in this instruction manual are copyrighted by DOMU Brands.Any unauthorized use may violate worldwide copyright, trademark, and other laws.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>