MPOW PA181A Fast Wireless Charger Pad User Manual
- June 5, 2024
- MPow
Table of Contents
MPOW PA181A Fast Wireless Charger Pad
CHARGING
WORKING STATUS
For the fast and safe charge, using a Quick Charge 2.0 or 3.0 Wall Charger is highly recommended. Other Chargers may not work well with this device.
Attentions
-
Please keep the charger away from water or other liquids.
-
Do not place the charger too close to any magnetic stripe or clip card (ID card, bank cards, etc.) to avoid magnetic failure.
-
This item is not to be used on any mobile device with metal plates, as it will cause extreme heat that may burn and/ or damage the device.
-
Fast charge via the plug and USB charging cable (both support QC 2.0 or QC3.0).
-
Usually we recommend that the thickness of phone case should be within 3 mm (0.12 inch). It would not charge if the thickness is more than 5 mm
(0.19 inch). -
The standard temperature of wireless charger QI is 130’F, but the temperature of our products should be controlled within 113’F. The charger will cut off current when abnormal heating occurs. Please contact us if any damage occurs.
-
We recommend that you turn off the power-consumption software before charging to effectively prevent the phone from overheating. When the temperature exceeds 113’F during charging, it is normal for the charging speed to slow down.