Siss Technology S-1000 Card Printer User Manual
- June 5, 2024
- Siss Technology
Table of Contents
S-1000
Thank you for purchasing Card Printer S-1000 of
SISS Technology Inc.
This Manual and the products are protected by copyright law and patent law.
This manual and the product can be copied, reproduced, and translated into any
languages in any form that can be read by certain electronic media or machines
without the prior written consent of SISS Technology Inc. is not liable for
any error or technical inaccuracies That occurs if you are fixing your product
following this manual. SISS Technologys Inc. Will not be liable for any error
made by you If your product malfunctions.
This manual can be changed at any time without prior notice.
S-1000 is the model name of SISS Technology Inc.
S-1000 is a trademark of SISS Technology, Inc.
SISS Technology Inc. and Logo are trademarks of SISS Technology, Inc.
Microsoft, Windows 2000, Windows 2003, Windows XP, Windows VISTA, Windows 7,
and Windows10 are trademarks of Microsoft, Inc.
Copyright 2008,2010,2012,2020 SISS Technology, Inc. All rights reserved.
Precaution for Safety
WARNING Users must operate the product after they have read the
precautions very carefully and thoroughly.
The symbols of precautions contain important contents and are specified as
Warning and Caution.
There is no responsibility of our company for any accidents and/or damages of
products owing to the ignorance of precautions while using.
CAUTION A breach of this instruction may cause serious or Slight wounds
and may bring on damages to product And property.
A breach of this instruction may cause a slight wound And may bring on damages
to product and property.
NOTICE It describes the case that a more detailed explanation is needed or
contents which are of help for the operator.
A breach of this instruction may cause a serious or slight wound and may bring
on damages of product and property.
In relation to Power
- Do not use damaged power cords, plugs, and loose outlets.
- Do not pull out the cord or touch the plugs with wet hands.
- Do not bend the power cord excessively or damage it by pressing it with heavy items.
- Pull the wire out when there is thunder and lightning or is not been used for a long time.
- Do not use multiple electric devices at one outlet simultaneously.
In relation to Installation
- It should not be installed in places of humidity, dust, and area where liquids are present.
- Do not put candles or cigarette lighters in the product and do not install it near heat machines.
- Pull the power plug out from the outlet without fail when you move it. The damage of the power cord or generation of heat may cause fire or electric shock.
- Put the product away from flammable liquid, gas and aerosol, etc.
In relation to maintenance
- Wipe the dust and water out at the power plug.
- Clean up after pulling out the power plug and don’t sprinkle the water directly or don’t wipe with benzene or thinner
Others
- Do not put water bowls, chemicals, and small metals on the product.
- Please contact Service Center immediately in the event of a strange sound, smell, or smoke coming from the product.
- Be sure to use the specification of power capacity instructed in this manual for connection with the Printer. (Do not use similar power adapters; ex) Laptop computer, game machines etc.)
A breach of cautions may cause a serious or slight wound, and May bring on damages of product and property.
caution In relation to Installation
- Do not install in unstable places.
- Keep the product out of the direct rays of the sun. It may cause defects of the product.
- Do not install around air conditioner and radiator. It will cause performance degradation.
In relation to maintenance
- Do not separate the cover or protection devices.
- Turn off the product in advance in case you put your hands inside of it.
- Be sure to clean and maintain the product according to the instruction in this manual.
- Turn off the product in advance in case you put your hands inside to replace supplies or to clean
Others
- Do not disassemble, repair, or remodel the product at the operator’s discretion.
- Do not put heavy items on the product.
|
---|---
CAUTION Please install the Printer by ensuring sufficient space and keeping it out from unstable, humid, direct rays of the sun, and the place closed to an air conditioner or heater.
Preparation
1.1 Name by function of Printer (Front)
No| Name|
Description of Function
---|---|---
1
| Cover| ▪ Open the Cover of Printer when you replace the ribbon or remove Card Jam.
2
| Ribbon Cartridge| ▪ The place where Color/Black ribbon is installed. Put ribbon cartridge in gently then it is naturally fixed.
3
| M/SHead(Option)| You must be careful so as not to damage MS Head.
4
| Color Sensor| ▪ It detects the limits of the color ribbon.
5
| Hopper& Stacker(Front) Stacker(Rear)| ▪ Card loading/card ejection
▪ The card thickness is automatically adjusted.
6
| Display/LED| ▪ Display printer status.
7
| LCD| ▪ The condition of the Printer is displayed in Color LCD. Please refer to the detailed description of LCD for detailed functions.
8
| Button| ▪ It has the function of ribbon lineup and unloading of Card. Please refer to the Button use manual for detailed content.
9
| RF Tag| ▪Ribbon awareness tag.
10
| SmartCard Contact(Option)| ▪ Smart Card Contact part.
11
| TPH Head| ▪ 300DPI TPH Head. If the TPH Head is touched by a sharp part, it can be damaged. Please be careful.
WARNING ⑫ Printer Head can be in the state of high temperature during operation. Be careful of getting burned. In case the Jam occurs, you have to remove Card Jam after turning off the power.
1.2 Features by function of Printer (Rear)
No | Name | Description of Function |
---|---|---|
1 | Power Adapter Jack | ▪ DC 24V (2.5A) is used. Using substandard Adapters may |
cause the breakdown of the device.
2| Ethernet Port| ▪ Administrator use.
3| USBPort(B type)| ▪ USB port. This product supports USB 2.0. .
4| USB port(A-type)| ▪ Administrator use.
5| Serial Port| ▪ Spare Serial Port.
WARNING Use the standard specification of Power for the product. A non-
standard power supply may cause malfunction and defects of the product. Other
ports are to support functions of the Printer.
They don’t support at general models.
1.3 Features by functions of printer (LCD)
LED
No | Color | Status | Description of Function |
---|---|---|---|
1 | Green | ON. | ▪ Printer Power ON-Ready |
OFF | ▪ Printer Power OFF | ||
2 | Yellow | Twinkle. | ▪ Data Sending / Receiving |
3 | Red | OFF | ▪ Normal condition |
Twinkle | ▪ Error occurs |
-Cut of ribbon(In case of checking End Mark)
– Other errors occur
Button
No | Button | Description of Function |
---|---|---|
1 | POWER | ▪ One-touch power on/Press 3 seconds, power off. |
2 | FUNCTION | ▪ Find the print start location (Yellow) of the Color ribbon.. |
- Power On + Feed button should be pressed longer than 3 seconds for running.
1.4 Replacement method of color ribbon
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense. Change
or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment under FCC
rules.
FCC Caution
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.