BIZOE Electronic TWS-22 True Wireless Earbuds User Manual
- June 5, 2024
- BIZOE Electronic
Table of Contents
True Wireless Earbuds
USER MANUAL
Product Specificaion:
Model number: TWS-22
Version number: 5.1
Input: DC 5V / 1A maximum
Earbuds battery: 3.7V / 45mah
Charging case battery: 3.7V / 400mah
Music time: About 5hours per charge
Profiles support: AVRCP_V1.4/HFP_V1.6/HSP_V1.2/A2DP_V1.2
Packing List:
Wireless Earbuds 1 Pair
Charging case 1 Pcs
USB-C cable 1 Pcs
User manual 1 Pcs
Operation method：
-
Power on/off:The earbuds will automacally power on are taken out from the charging case, and will automacally power off are pung into the charging case.
-
Pairing mode: Take out the earbuds from the charging case, they will automacally pair with each other successfully.
Aer pairing, one earbud will flash red and blue light alternately, and another earbud will flash blue light every 3 seconds. -
Connection: Aer pairing, turn on the Bluetooth of your smartphone/ tablet, search and click the Bluetooth name ‘TWS-22’, the earbuds will connect successfully.
-
Auto-reconnect: Turn off and on again after connecting, it can automacally reconnect.
Other Functions:
- Play/Pause the song: Touch Right/Left earbud one time
- Siri/Voice assistant: Touch Right/Life earbud three times
- Previous song: Long press left earbud for 2 seconds
- Next song: Long press right earbud for 2 seconds
- Answer/ Hang up the call: Short touch left/ right earbud
- Reject the call: Long touch for 2 seconds while the phone is coming
- Volume up: Touch right earbud two times
- Volume down: Touch left earbud two times
Charging Mode：
The earbuds will turn on a red light while charging
The charging case will flash green color light every 2 seconds and will stop
flashing and turn off are fully charged.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>