Shenzhen Xin Teng Fei Electronic Technology K9 Bluetooth Microphone Instruction Manual
- June 5, 2024
- Shenzhen Xin Teng Fei Electronic Technology
Table of Contents
Shenzhen Xin Teng Fei Electronic Technology K9 Bluetooth Microphone
Microphone Button Functions
Button Operation
- Long press: Power on/off.
- Short press: Eliminate audio sound.
- Short press: Previous (MP3/FM mode)
- Long press: Shooting (Photography mode)
Wireless Karaoke
Turn on the power: Long press to boot. Bluetooth connection: Turn on the mobile phone Bluetooth, search for the device named D18 and click to pair,then a prompt tone indicates that the connection is successful. Adjusting vocals: Adjust the vocal and reverb volume to the appropriate position. Start karaoke.
FM Function
Short press M to switch radio mode. Short press to automatically search for channels, and press again to stop searching. Short press 44 and >>to select a channel.
Phone Recording Song
Connect the recording cable:lnsert the MICRO head of the recording cable into the MICRO interface of microphone, and insert the 3.5mm interface into the earphone jack of the mobile phone. Recording song: Open karaoke software in the mobile phone such as Tianlai karaoke, KuGou music or other recording songs APP. Select a song you like and start singing as method above, recording the song.
Camera Function
Open the mobile phone Bluetooth and search equipment named D18 2. Open camera function of the mobile phone and long press or > to take photos.
Note
In the camera function, the Android system requires version 4.2.2 or higher,
1OS requires version 6.0 or higher, other versions are not supported
temporarily and the mobile phones with independent camera physical buttons are
not supported generally. In the recording mode, the microphone cannot switch
songs and adjust the sound volume, which can only be adjusted by devices such
as mobile phones. Microphone LED colors, brightness and flicker frequency
depend on the sound and vibration frequency of the audio and microphone.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interferenoe will not oocur in a particular installation. If this equipment does cause harmful interferenoe to radio or television reoeption, which can be determined by tuming thee equipment off and on, the user is encouraged to try to corect the interference by one or more of the folowing measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the follawing two conditions
- This device may not cause hamful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.