actbest Electric Bicycle Instruction Manual

actbest Electric Bicycle

Specifications

• Power Supply: Electric battery
• Charging Time: Varies
• Range: Depends on usage
• Recommended Terrain: Paved roads
• Safety Features: Brakes, Safety Checklist

Product Information

Important Safety Guidelines It is essential to follow safety guidelines for battery charging and maintenance. Always ensure proper charging procedures and avoid overcharging or exposing the charger to external elements.

Tips for Maximizing E-bike Range To maximize the range of your electric bike, pedal more for greater distance, avoid frequent stops, maintain proper tire pressure, and ensure smooth terrain.

Safety Checklist Perform safety checks before each ride, including inspecting brakes, wheels, tires, and ensuring all components are properly adjusted and secured.

Product Usage Instructions

Power Supply Precautions When charging your electric bicycle, always connect the battery and charger first before plugging into the power supply. Avoid prolonged charging without need and monitor for any abnormal indications during charging.

Precautions for Installation Follow the assembly instructions carefully to ensure proper installation of components. Pay attention to details to avoid any potential issues during operation.

Assembly Assemble the electric bicycle according to the provided instructions. Ensure all parts are securely attached and properly aligned for safe operation.

Operation Before riding, familiarize yourself with the controls and features of the electric bicycle. Start in a controlled environment away from traffic to practice handling and braking.

Troubleshooting If you encounter any issues during operation, refer to the troubleshooting section of the manual for guidance on resolving common problems.

FAQ

Q: How long does it take to charge the battery fully? A: The charging time varies depending on the battery capacity and charger specifications. Refer to the user manual for specific charging times.

Q: Can I ride the electric bicycle in rainy conditions? A: It is not recommended to ride in heavy rain or through deep puddles as it may damage the electrical components. If caught in light rain, take precautions to protect the bike from water exposure.

Q: How often should I check the tire pressure? A: It is advisable to check tire pressure before each ride to ensure optimal performance and safety. Adjust as needed based on riding conditions.

SERVICE

IMPORTANT: FOR ACTBEST ONLY

For damaged or defective products, questions, replacement parts or any other service support please contact our customer service department by the below methods:

• service@actbest.net

Response Time: 24-48 hours Emailing us with the Order ID will be the best method to receive a response during peak business hours.

PLEASE DO NOT RETURN THIS PRODUCT WITHOUT ASKING OUR CUSTOMER SERVICE.

Response Time: 24-48 hours Emailing us with the Order ID will be the best method to receive a response during peak business hours.

IMPORTANT SAFETY WARNING

Battery and Charging:

• Please fully charge your batteries before first use and after each use for the recommended charge times (see below). Li-ion batteries typically take 4-6 hours to charge.
• Charge at 0°C~45°C, discharge at -20°C~60°C, keep the battery dry, do not put the battery in acidic or alkaline liquid, avoid rain, keep away from fire, heat and high-temperature environments.
• It is strictly forbidden to reverse the positive and negative poles of the battery, and it is strictly forbidden to damage, insert or short-circuit the battery
• Please use the original special charger when charging, do not exceed 6 hours, and the charging current does not exceed 3A.
• When not in use for a long time, please store the battery in a cool and dry place, and charge it for 5 hours every month.
• Users must operate in accordance with the instructions when charging, otherwise the consequences will be at their own risk.
• When charging, it should be placed in a ventilated environment, and it is strictly forbidden to charge in a closed space or indoors. Hot sun or high-temperature environment.
• When charging, connect the battery and charger first, and then connect the power supply; when the battery is fully charged, first cut off the power supply, and then unplug the charger connector. -When the green light is on, turn off the power supply in time.
• It is forbidden to connect the charger to the power supply without charging for a long time. -During the charging process, if the indicator light is abnormal, there is a strange smell, or the charger case is overheated, stop charging immediately and repair or replace the charger.
• During the use and storage of the charger, pay attention to avoid the entry of foreign objects, especially to avoid the inflow of water or other liquids, so as not to cause a short circuit inside the charger.
• Try not to carry chargers with your bike. If you really need to carry it, you should put it in the toolbox after shock absorption. Do not disassemble or replace the accessories in the charger by yourself

BEFORE YOU RIDE

MANUAL IMPORTANT

• Read the manual before the first ride for better performance, comfort, and enjoyment. First ride in a controlled environment, away from cars, obstacles, and other cyclists.

GENERAL WARNING

• Bicycling is inherently risky, and proper maintenance is essential to reduce the risk of injury. This manual includes many warnings and cautions regarding the importance of maintaining and inspecting your bicycle. Please note that any fall can result in serious injury or death, and we do not repeat this warning throughout the manual wherever the risk of falling is mentioned

Tips for Maximizing E-bike Range:

• Pedal more for greater distance, and try to avoid frequent stops and starts.
• Cold weather can decrease battery capacity, so keep this in mind when planning your trip.
• Wind can be a factor, with tailwinds helping you go further and headwinds reducing your range.
• Smoother terrain, such as paved roads, can help you travel further. Proper bike maintenance, including tire pressure and battery care, will help maximize range.

SAFETY CHECKLIST

Before the first ride, it is important to carry out the following safety checks

1. Brakes
   Ensure front and rear brakes work properly. Ensure brake shoe pads are not overworn and are correctly positioned in relation to the rims. Ensure brake control cables are lubricated, correctly adjusted and display no obvious wear. Ensure brake control levers are lubricated and tightly secured to the handlebar

2. Wheels and tires
   Ensure tyres are inflated to within the recommended limit as displayed on the tyre sidewalk. Ensure tyres have tread and have no bulges or excessive wear. Ensure rims run true and have no obvious wobbles or kinks. Ensure all wheel spokes are tight and not broken. Check that axle nuts are tight. If your bicycle is fitted with quick release axles, make sure the locking levers are correctly tensioned and in the closed position.

3. Steering
   Ensure the handlebar and stem are correctly adjusted and tightened, and allow proper steering. Ensure that the handlebars are set correctly in relation to the forks and the direction of travel Check that the headset locking mechanism is properly adjusted and tightened. the If bicycle is fitted with handlebar end extensions, ensure they are properly positioned and tightened

4. Chain
   Ensure chain is oiled, clean and runs smoothly Extra care is required in wet or dusty conditions

5. Bearings
   Ensure all bearings are lubricated, run freely and display no excess movement, grinding or rattling Check headset, wheel bearings, pedal bearings and bottom bracket bearings.

6. Cranks and Pedals
   Ensure pedals are securely tightened to the cranks. Ensure cranks are securely tightened to the axle and are not bent

7. Derailleurs
   Check that front and rear mechanisms are adjusted and function properly Ensure shift and brake levers are attached to the handlebar, shift and brake. Ensure derailleurs, shift levers and shift and brake cables are properly lubricated

8. Frame and Fork
   Check that the frame and fork are not bent or broken either If are bent or broken, they should be replaced

9. Accessories
   Ensure that all reflectors are properly fitted and not obscured Ensure all other fittings on the bike are properly and securely fastened, and functioning

10. Motor Drive Assemble and Throttle
    Ensure all motor drive components are correctly mounted and functioning properly

11. Battery Pack
    Ensure the batteries are in good operation condition and kept fully charged

POWER SUPPLY PRECAUTIONS

PRECAUTIONS FOR INSTALLATION

Important Reminder: Before installation, please confirm that all product components and assembly parts are present and accounted for. Please check the product structure and make sure there are no missing parts or components before assembly.（Check the following PACKAGE LIST & PRODUCT STRUCTURE）

PACKAGE LIST

Important Reminder: Before installation, please confirm that all product components and assembly parts are present and accounted for. Please check the product structure and make sure there are no missing parts or components before assembly. （Check the following PACKAGE LIST & PRODUCT STRUCTURE ）

PRODUCT STRUCTURE

1. Shift Lever
2. Central Display
3. Brake Lever
4. Stem
5. Headlight
6. Front fender
7. Tyre
8. Signal lights
9. Brake Disc
10. Front-wheel quick-release
11. Front Fork
12. Chain cover
13. Pedal14 Chain
14. …
15. Rear Derailleur
16. Motor
17. Tail light
18. Rear carrier
19. Seat Tube Adjustment Quick Release
20. Saddle21 Battery Lock Key Hole
21. Lithium Battery
22. Battery charging hole
23. Control adjustment button area
24. Signal lights switch button
25. Horn
26. Shock absorption
27. Bucket for stuff
28. wheel reflector

ASSEMBLY

• Take the bike out of the box and place it upright with the direction foot support to keep it.the bike stable and facilitate subsequent operations.

• Remove the protective cover of the front frame.

• The two fixation points for the mudguard: the position above the front wheel is fixed with nuts.)

• Pick up the front wheel and remove the protective plate.

• Remove the brake caliper protection clip.

• Open the accessory small carton, take out the front axle quick release inside, loosen the nut and separate it from the screw.

• Insert the front axle quick release screw into the front axle core, tighten it with the nut,

• press the quick-release handle to lock the front fork.

• Lift the front of the bike and rotate the front wheel to check for any abnormal noise. If there is any, adjust the position of the disc brake to avoid it from touching the tire

• Loosen the 4 screws of the handlebar binder bolt stem

• Loosen the connection of the handlebar binder bolt

• Loosen the connection until it is loose enough to be rotated 180 degrees, then secure the connection.

• place the handlebar and adjust the horizontal angle of the handlebar, and then fix it with the pipe clamp screws

• please make sure to fix the handlebar on the correct side

• Loosen the turn signal nut, adjust the height and fix it to the highest line table to avoid rubbing the body turn signal to the front when turning

• Loosen the tum signal nut, adjust the height and fix it to the highest line table(the red arrow signal) to avoid rubbing the body when turning, then tum signal to the front.

• Fixed turn signal

• Take out the headlight, remember to take out the rubber plugs on both sides of the headlight, and then fix it on the same shelf as the turn signal

• Connect the headlight cable, in the picture above; notice the arrow marks on the two connectors

• Install the cushion, adjust to your height, and tighten the bolts

• When installing the pedals, pay attention to the port of the pedal shaft. The pedal with “L.” stamp is the left pedal, the stamp with “R” is the right pedal, and the right pedal is installed on the side of the sprocket.
  Note: The left pedal is tightened to the left, and the right pedal is tightened

• Place the wheel reflector as shown in the picture, if it cannot be pasted, please adjust the position gently

After all, adjustments have been made, shift through every gear several times at varying speeds. This will ensure all your adjustments are correct and will all owyou to pinpoint any trouble areas. If you encounter any problems, refer to the appropriate section and make any necessary adjustments. Check the tire pressure and inflate each tube to the recommended psi as stated on the sidewall of the tire Check that the kickstand operates smoothly and the kickstand bolt is secured tightly. Finally, examine the bicycle. Make sure all accessories are attached and all quick releases, nuts and bolts have been tightened securely. Correct maintenance of your bicycle will ensure many years of happy riding. Service your bicycle regularly by referring to the relevant sections of this manual, OR take it to a professional bicycle shop.
Remember: Always wear a helmet and obey all traffc laws.

OPERATION

3 RIDING MODES

1. Manual Mode: Ride the bike as any regular bike.
2. Power-assisted Mode: Switch the key ,power on,ride the bike then throttles operate by rotating the throttle.
3. Pure electric Mode: Switch the key, power on, and throttles operate by rotating the throttle.

Detailed description:

• Switch the key, power on, Throttles operate by rotating the throttle towards the rider much like a motorcycle. The more you twist the throttle, the faster the motor system will propel the bicycle.
• Before you begin riding, turn the main power switch on, then start riding as you would ride any regular, non motor assisted bicycle. After you have begun to ride, slowly twist the throttle (on equipped models)towards you. The more you twist the throttle, the more motor power will be applied to the wheels. You may feel the pedals get a “lighter” feel than when riding without the motor assisting you. Once you have twisted the throttle all the way, the motor will accelerate you to its full speed of about 18-20mph (28-32 km/h).Begin by first riding as if you are on a normal non-electric bicycle. After a few seconds, the motor will slowly activate and ramp up to 50% power. Then, while the pedals are in motion, you can slowly twist the throttle towards you to activate the 5 Pedal Assist Levels full motor power as below

(All function of the handlebar)

1. Switch
2. Throttles
3. Multi-function color LCD screen
4. Turn signals
5. Horn
6. Motorcycle oil disc brake
7. Control adjustment button area
8. Speed transmission

Color Screen Display:

1. Battery level
2. Speed
3. Riding distance
4. PAS (Power-Assisted Steering) assistance level 1-5
5. There is a USB charging port at the bottom left

‹Not waterproof, remember to cover the port when not in use>

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>