Shenzhen Hengshimei Technology HSM-X1-9-P1-9 Visual WiFi Ear Endoscope User Manual
- June 5, 2024
- Shenzhen Hengshimei Technology
Table of Contents
HSM-X1-9-P1-9 Visual WiFi Ear Endoscope
User Manual
Steps to use on the phone
Step 1: Download “AiSee Pro” App
For 10S: Download and install the App “AlSee Pro” from App Store.
For Android: Download and install the App “AISee Pro” from Google Play Store.
Optional:
Scan the QR Code below to download the App.
Compatible Device:
Android 4.4, iOS 9.0, and higher versions.
Android system phones like Samsung S7, Galaxy 56 edge, Note 8, S8, 58+, 59+,
510, Google Pix-eI, XL, Pixel 3, nexus 6p, Huawei Mate9, Mate 10, Mate 20 Pro,
OnePlus, etc. 105 system phone like iPhone 6, 6s, 7, 7+,8, 8+, X, XR, etc.
Notice: This model can’t work for computer systems!
Step 2: Connection steps
-
Long press the switch key to open the device, after 5 seconds, then step into the next operation.
-
Open the *AiSee Pro” App, click the “Go to connect icon”, follow the pop-up prompt and click to connect now to jump to the mobile WIFI setting interface.
-
Find “AiSee -XXXX* on the WIFI setting interface and click to connect.
-
After the mobile phone displays “AiSee -xxxx’ WIFI is connected, return to the App again and click the house icon to enter the device.
After connecting to the product WIN connection, you will be asked some
questions:
l0S: “AiSee Pro” would like to find and connect to devices on your local
network. Suggestion: Click ‘OK’
Android:
if your mobile phone displays the following prompts, WiFi has no data
connection, whether to continue trying to use the WiFi? Whether to keep the
connection? Whether to switch WiFi?
Suggestion: Click the “Keep” I” CONNECT” I” Decline” option
Ear spoon installtion
This beveled edge is aligned with the lens and then lock in the following picture.
Cover tightly
- you can choose a tip that should be wiped with wet tissue or an alcohol pad before use, if needed, you can replace at will.
- you should be careful or slowly go into your ear canal, then track it from APP to get the environment of the ear canal
Troubleshooting
| Problems | Suggestions |
|---|---|
| Cannot save pictures or videos to your phone | Allow AiSee Pro to access |
photos, media, and files on your device
The camera is no respond, the camera doesn’t light up| Please charge the
device
APP crashed| Please uninstall APP and scan the QR code to install
The live image does not show after launching the app| 1. Make sure your
phone is connected to the “AiSee -XXXX” WIFI
2. The question: This WLAN network has no Internet access. Connect
anyway7Please be sure to choose “Connect” If you choose ‘CANCEL’ at the first
time, you need to forget network of the “AiSee -XXXX” WIFI on your phone then
connect with this WIFI again, continue to open the app and choose ” CONNECT”
of this question so that it can work property 3. Enter your mobile evice
setting and allow the” AiSee Pro” app to access” W- LAN” or “WLAN &Cellular
ata” 4. Close the App and open it again 5. Turn the mobile phone data on and
then off again
---|---
Ear endoscope’s blue light on| Please charge the product
WIFI connection break| Please restart the ear endoscope, open the app, and
connect to WIFI
Product Parameter
| Product Name: Visual Ear endoscope | Working Frequency 2.4Ghz |
|---|---|
| Network Standard IEEE 802.11b/g/n | Image Sensor CMOS |
| Image Transmission Rate 30fps | Battery Capacity 150mAh |
| Environment Temperature 10-50 °C | Charging Time 1h |
| Battery Life About 1 h | Working Voltage 3.7V-4.2V |
| Input Parameter 5V— 0.4A | Lens Diameter 4.0mm |
| Rate Power 0.75W | Pixel 5MP |
| Best Focal Length 1.5-2cm | Charging port USB2.0 |
| Gravity Sensor 3 Axis |
IP/NETWORK CAMERA
Model:IN-9008Full HD
FCC ID: XXX-IN9008
manufacturer’s name: Shenzhen Hengshimei Technology CO., Ltd.
Address:301, N0.29, Huimin First Road, Guihua Community, Guanlan Street,
Longhua Shenzhen
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable conditions without restriction.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>