MOVCAM MRCP-1 Helm Control Panel User Manual
- June 5, 2024
- MOVCAM
Table of Contents
MOVCAM MRCP-1 Helm Control Panel
MAGNETS
This product contains magnets and components that generate strong electromagnetic fields. Keep your Quad Lock product a safe distance away from any sensitive or implanted medical devices. Consult with your medical practitioner or device manufacturer before use, or if you suspect the product is interfering with your device.
FCC STATMENT
Annex Products Pty Ltd, Australia, declares that the products “Wireless Charger Head, Model No. QL-3954-W”, complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: The “Wireless Charger Head” has been tested and found to comply
with the limits for a Class B device, pursuant to Part 15 of the FCC Rules and
has been assigned FCC ID: 2AOU9-QLH2. These limits are designed to provide
reasonable protection against harmful interference. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced technician for help.
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Use only supplied antenna.
CAUTION: Any changes or modifications in construction of these devices which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment This device was tested for operations. To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Bodyworn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. This device in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out. This restriction will be applied to all Member States of European Union. The device complies with RF specifications when the device used at 20cm form your body
Declaration of Conformity
Hereby, Annex Products Pty Ltd declares that the product “Wireless Charger
Head” is in compliance with Directives 2014/53/EU & 2011/65/EU. The full text
of the EU declaration of conformity is available at the following internet
address: https://www.quadlock.com.au/compliance
This device was tested for operations. To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user’s body and the charger, including the antenna. Third-party belt- clips, holsters, and similar accessories used by= this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. The device is in compliance with the essential requirements and other relevant provisions of the UK Radio Equipment Regulations SI 2017:1206 (as amended). 1. The device complies with RF specifications when the device used at 20cm form your body
Declaration of Conformity:
Hereby, Annex Products Pty Ltd declares that the product “Wireless Charger
Head” is in compliance with the following Directives: Radio Equipment
Regulations 2017, Electrical Equipment (Safety) Regulations 2016 and The
Restriction of the Use of Certain Hazardous Substances in Electrical and
Electrical Equipment 2012. The full text of the UK declaration of conformity
is available at the following internet address:
https://www.quadlock.com.au/compliance
- Radiated H-Field 5.3 dBμA/m (@10m) (only for EU and UK)
- TX/RX frequency range 110-148KHz (only for EU and UK)
INDUSTRIE CANADA (IC: 27134-QLH2)
IC Caution:
Radio Standards Specification RSS-Gen, issue 5 This device contains licence-
exempt transmitter(s)/receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licenceexempt RSS(s). Operation is subject to
the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
RF exposure statement:
The equipment complies with IC Radiation exposure limits set forth for
uncontrolled environments. This equipment should be installed and operated
with a minimum distance of 10cm between the radiator and your body.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>