TCL C635 QLED 4K 65′ Google TV Instruction Manual
- June 5, 2024
- TCL
Table of Contents
TCL C635 QLED 4K 65′ Google TV Instruction
Safety Information
Precautions
Read all of the instructions before operating the set. Keep these instructions
well for future use.
Warning
A television set may fall, causing serious personal injury or death. Many
injuries, particularly to children, can be avoided by taking simple
precautions such as:
-
ALWAYS use cabinets or stands or mounting methods recommended by the manufacturer of the television set.
-
ALWAYS use furniture that can safely support the television set.
-
ALWAYS ensure the television set is not overhanging the edge of the supporting furniture.
-
ALWAYS educate children about the dangers of climbing on furniture to reach the television set or its controls.
-
ALWAYS route cords and cables connected to your television so they cannot be tripped over, pulled or grabbed.
-
NEVER place a television set in an unstable location.
-
NEVER place the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.
-
NEVER place the television set on cloth or other materials that may be located between the television set and supporting furniture.
-
NEVER place items that might tempt children to climb, such as toys and remote controls, on the top of the television or furniture on which the television is placed.
If the existing television set is being retained and relocated, the same considerations as above should be applied.- This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.
- This symbol indicates that the fuse may be in the neutral and that the mains shall be disconnected to de-energize the phase conductors.
If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded by a skilled person so as to provide some protection against voltage surges and built-up static charges.
Product
- Do not block or cover the ventilation openings on the back cover.
- Do not push objects of any kind into this unit through the cabinet slots as they could touch the current-carrying parts or short-circuit parts, resulting in fire, electric shock, or damage to the unit.
- Do not attempt to open the cabinet as this may cause damage. There are no parts inside you can service by yourself. Refer all servicing to qualified personnel.
- Do not touch the screen surface with fingers as this may scratch or mar the TV screen.
- Do not impact the TV screen with hard pressure as this may damage the TV screen severely.
- This appliance is not intended for use by young children or infirm persons without supervision. Young children should be supervised to ensure that they do not play with the appliance.
Power and Plug
- Unplug the set under the following conditions:
- If the set will not be used for a long period of time. – If the power cord or the power outlet/plug is damaged.
- Follow the instructions to install and adjust the product. Adjust those controls that are covered in these operating instructions as improper adjustment of other controls may result in damage. If this happens, unplug the set and refer to the service personnel.
- If the set is subject to impact or has been dropped and the cabinet has been damaged.
- Where the mains plug or an appliance coupler is used as disconnect device, the disconnect device shall remain readily operable.
Power Cord and Signal Cable
- Do not allow anything to rest on or roll over the power cord and the signal cable.
- Protect the power cord and the signal cable from being trampled.
- Do not overload the power cord or the power outlet.
- Do not expose the power cord and the signal cable to moisture.
Use Environment
- Do not place the set on an unstable cart, stand, or table.
- Place the set on a place that allows good ventilation.
- Do not use the set near damp, and cold areas.
- Do not expose the set to excessive heat such as direct sunlight, fire, or the like and no naked flame sources, such as lighted candles, should be placed on the apparatus.
- Do not expose the set to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
- Do not use the set in dusty environments.
- Operating Temperature: 5°C to 35°C (41°F to 95°F) Operating Humidity: 20% to 80%, non-condensing Storage Temperature: -15°C to 45°C (5°F to 113°F) Storage Humidity: 10% to 90%, non-condensing
Cleaning
- Dust the set by wiping the screen and the cabinet with a soft, clean cloth or some special liquid cleaner.
- Do not apply excessive force to the screen when cleaning.
- Do not use water or other chemical cleaners to clean the screen as this may damage the surface of the TV screen.
All other safety instructions about our TV sets are also applicable here. Wall
mount bracket not included.
( Note: Certain TV models are not designed to be mounted to the wall.)
Connections and Setup
TV Buttons
-
Power button
If the batteries in your remote control are run down, you can use the button on your TV set.
The model has only one button. It may work just as Standby/Quit standby button, or as a multi-function controller.
You can turn on the TV by pressing the button on the TV set.
While the TV is on, press the button to display the multi-function menu. For more information about how to use the multi-function menu, please refer to the figure below.
-
Press to move the highlight to the next function selection
-
Press and hold the button for more than 2 seconds to confirm your selection.
Note:
You can follow the on-screen guide to operate. Figures and illustrations are
provided for reference only and may vary depending on the model.
–MIC switch
The MIC button is located next to the power button. If you want to use the
feature of hands-free TV voice control, turn on this switch.
Initial Setup
The first time you switch the set on, the Welcome wizard appears, which guides
you through the initial setup process.
Follow the on-screen instructions to finish the initial setup process such as
selecting the language, pairing your remote, connecting to the network, and
more. During each step, either make a choice or skip the step. If you skip a
step, you can perform the setup later from the settings menu.
Notes:
-
It’s recommended to select Set up Google TV and finish its setup to enjoy more features during the initial setup process.
If you have finished the basic TV setup, you can reaccess Google TV by pressing on the remote control, selecting (Settings) > Set up Google TV, and pressing OK to confirm. -
When you pair your remote, keep the remote control and TV within 1 meter, and follow the on-screen guide for pairing. After finishing pairing the remote, you can use the Google Assistant button. If you skip remote pairing, you will be prompted to pair the remote with the TV again when you use the Google Assistant button for the first time.
Sockets
Note: The location and names of the sockets on the TV may vary according
to TV model, and not all sockets are ……….available on all models.
HDMI, HDMI(SERVICE) or HDMI(eARCIARC) socket (input)
The HDMI (High-Definition Multimedia Interface) socket can be used to connect
a Blu-ray player, Games Console, PC with a compatible video card installed,
certain DVD players or a high-definition compatible digital satellite decoder.
This socket provides an uncompressed digital connection that carries both
video and audio data by way of an integrated mini-plug cable. 
AV IN adapter socket
The AV IN adapter socket can be used to connect the attached AV adapter cable
with VIDEO and AUDIO L & R IN sockets. The AV IN sockets can be used to
connect a range of equipment, including video recorders, camcorders, decoders,
satellite receivers, DVD players, or games consoles. The VIDEO IN socket
provides composite video connection. 
ANTENNA IN socket (input)
This socket can be used to connect an outside aerial. 
LAN
RJ45 plug for connecting to external modem or network access equipment.
DIGITAL AUDIO OUT (OPTICAL) socket
This socket can be used to connect a compatible digital audio receiver.
Headphone socket (output)
This socket can be used to connect headphones or stereo earphones.
Warning: Excessive sound pressure from earphones and headphones can cause
hearing loss.
USB2.0 or USB 3.0 socket (input)
The USB socket(s) can be used to connect a USB 2.0 or USB 3.0 device.
Note: The number of USB sockets on the TV may vary according to TV model.
Remote Control Functions
Most of your television’s functions are available via the menus that appear on
the screen. The remote control(s) supplied with your set can be used to
navigate through the menus and to configure all the general settings.
Notes:
- Figures and illustrations in this operation manual are provided for reference only and may differ from actual product appearance. 2.The remote control type may be changed without notice, please refer to the remote control attached with your TV. 3. Certain function may not be available for some models.
- To switch the sound off and back on.
- Standby/quit standby.
- Add an entity to Watchlist. (Available only in Google TV mode.)
- Press the Assistant button on your remote to talk to the Google Assistant. (Available only in Google TV mode and when the network connection works normally.)
- To display the dashboard menu.
- Navigation direction buttons (Up/Down/Left/Right).
- To confirm an entry or selection. OK
-
- To return to the previous menu or quit an app.
- To access the Google TV homepage.
- To access Electronic Program Guide. (only available for digital channels.)
- To select input source.
- To control the volume.
- To change channels.
- To perform the corresponding function as indicated on screen.
- To display the quick panel.
- To pop up the virtual remote control keyboard when available.
- To open TCL home on screen.
- To access Netflix.
- To access Prime Video.
- To access Safety Guard.
- To access Media Player. (Not available for some models.)
- To access YouTube.
- To access TCL Channel.
Notes:
- Certain functions may be accessed from the virtual remote control keyboard only, please press button on the remote to display it and operate accordingly.
- The App buttons may differ depending on the model. The App button is used for accessing the corresponding App.
How to Use the Remote Control
- Before using the Google Assistant button, you must finish pairing the remote with the TV first.
- This Google Assistant function is only available for content search from certain apps.
- Set languages in the (Settings)> System> Language to your local language or official language to enhance voice search successfully.
Installing Batteries
- Push to open the back cover as illustrated.
- Insert two AAA batteries according to the polarities marked on the battery case.
- Replace the back cover as illustrated.
CAUTION: Risk of fire or explosion if the battery is replaced by an incorrect type.
Connections and Setup
Network Connection
Your TV will require an internet connection to operate all functions. Data
usage charges may apply.
Please refer to your Internet Service Provider (ISP) for additional
information.
To access the internet, you must subscribe to high-speed broadband internet
service from your internet service provider.
Your TV can be connected to your home network in two ways:
Wired, using the RJ45 (LAN) connector on the back panel.
Wireless, using the internal wireless or external wireless USB adapter and
your home wireless network.
Note: The following instructions are just the usual ways to connect your TV to the wired or wireless network. The connection method may be different depending on your actual network configuration. If you have any questions about your home network, please refer to your ISP(Internet Service Provider).
Connecting to a wired Network
To connect to a wired network:
- Ensure you have:
- An Ethernet cable long enough to reach your TV
- A router or modem with an available Ethernet port
- A high-speed internet connection
- An Ethernet (LAN) port on the back of the TV
- Connect your Ethernet cable to the router and to the Ethernet port on the back of the TV.
- Use the Network & Internet menu to configure the TV.
Connecting to a Wireless Network
To connect to a wireless network
- Ensure you have:
- A router broadcasting a high-speed wireless signal
- A high-speed internet connection
- Use the Network & Internet menu to configure the TV.
Note: Please follow below steps to enter the Network & Internet menu.
- Press on the remote control to display the dashboard menu.
- Select (Settings) and press OK to enter the settings menu.
- Press Up/Down to select Network & Internet, then press OK to enter the submenu and follow the on-screen guidance to set up your network.
Switching On
Follow the instructions on this page on how to switch on your TV set and the
remote control before going on to following pages describing how to use the
channel set-up procedure.
-
Insert two AAA batteries in the remote control.
Precautions on using batteries:- Make sure you use the correct polarity.
- Do not mix new and used batteries.
- Do not use rechargeable batteries this could cause them to leak or explode.
- Remove the batteries from the remote control if you are not using it for a long period of time.
- Attention should be drawn to the environmental aspects of battery disposal.
-
Connect the power cable FIRST to the television, than to a mains socket. (Note: If the power cable is connected to the television, please only connect the power cable to the mains socket.) Your TV set should only be connected to an AC supply. It must not be connected to a DC supply. If the plug is detached from the cable, do
not, under any circumstances, connect it to a mains socket, as there i risk of electric shock.
Note: The figures are for representation only, the location of the power socket of the television might differ depending on the model. Connect an outside aerial to the ANTENNA IN socket at the back of the TV set. The aerial socket (75 OHM – UHF/ cable) can be used for connecting an external aerial or other equipment fitted. -
Connect an outside aerial to the ANTENNA IN socket at the back of the TV set.
The aerial socket (75 OHM – UHFI cable) can be used for connecting an external aerial or other equipment fitted. -
When powered on, the TV will be turned on directly or be in standby mode.
If the power indicator lights up, the TV set is in standby mode. Press the button on the remote control or on the TV set to turn on the TV.
Switching off
To put the TV set into standby mode, press the button on the remote control.
The TV set remains powered up, but with low energy Consumption.
To switch off the TV set, unplug the mains socket from the mains outlet.
Basic TV Operations
Accessing Channels Using the Up/Down buttons: press the Up/Down buttons on the remote control to scroll through the channels. Using the OK button: press the OK button to display the Freeview Mini Guide and press Left/Right and OK to enter Using the P+/P- buttons: press the P+/P- buttons on the remote control to scroll through the channels. Using the button: press to display the virtual remote control keyboard, then you can use the numeric buttons or the List button to operate accordingly.
Watching Connected Devices
Press on the remote control to display the source list. Press Up/Down to
select TV or other input sources and press OK to confirm.
You can also press f on the remote control to display the homepage, press
Up/Down/Lef/Right to move the cursor to the ](Inputs) area on the right top of
the Screen, and press OK to enter. Then press Up/Down and OK to select the
input source.
Adjusting Volume
Volume control: press the +-buttons on the remote control or the corresponding
buttons on the TV set to increase or decrease the volume.
Sound mute: press the button to temporarily mute the sound. Press this button
again or the+ button to restore the sound.
Accessing Google TV Homepage
Allows you to enjoy the entertainment you love with a little help from Google.
Google TV brings together movies, shows and more from across your apps and
subscriptions and organizes them just for you.
Note: If you intend to use (online) video communication applications, an
appropriate webcam will be needed.
Webcams need to be purchased separately. For details, please consult TCL
Customer Service or your place of purchase.
WARNING:
-
Configure the network settings before using Google TV applications
-
Slow responses and/or interruptions may occur, depending on your network conditions.
-
If you experience a problem using an application, please contact the content provider.
-
According to the circumstances of the content provider, an application’s updates or the application itself may be discontinued.
-
Depending on your country’s regulations, some applications may have limited service or not be supported.
Changes in application content may be made without prior notice by the service provider.- Press h on the remote control to display the Google TV homepage.
- Press Up/Down/Left/Right and OK to enter the desired apps, functions or settings.
- Press to return to the homepage.
- To exit the homepage, press on the remote control to display, then press Up/Down and OK to select your desired input source.
Note: Since the connection with the Internet takes time, it’s recommended that you wait a few minutes to use the Google TV feature after activation of TV from standby.
Accessing TCL Channel
Allows you to enjoy more VOD(Video on Demand) content or featured
applications. 
- Press ANE On the remote control to enter TCL Channel or access it through the TCL Channel icon on the homepage.
- Press to return to the previous menu.
Note: Ul layout of TCL Channel will vary according to models or countries.
Using Settings Menu
Allows you to not only adjust settings, such as picture, Network & Internet,
Accounts & Sign-In and Apps, etc., but also set preferences.
- Press on the remote control to display the dashboard menu.
- Select (Settings) and press OK to enter the settings menu.
- Press Up/Down to select the desired item and press OK to enter the corresponding submenu.
- In submenus, press Up/Down to select menu options, then press OK to enter the option list or the corresponding submenu, or press OK to toggle on or Left/Right to adjust the setting.
- Press to return to the previous menu.
Note: Setting Clear LED Motion on will make fast-moving images clearer by controlling the LED backlight, but the picture will be darker with
more flickering than with Clear LED Motion set to off. (Not available for some models.)
Using Quick Start Function
It enables you to turn on your TV faster from standby mode than turning this
function off, but it will also increase standby power consumption.
- Press on the remote control, select (Settings) >System> Power and energy> Quick start and press OK/Right to enter.
- Select the Quick start option and press OK to toggle between on and of.
- Press to return to the previous menu.
Using More of Your TV
Installing Channels
This section describes how to search and store channels automatically. This
may be done in either of the cases below:
-
you are prompted that there are no channels in TV mode;
-
you want to update your channels.
-
In TV mode, press on the remote control and select (Settings) > Channels & Inputs > Channels > Channel Scan. Press OK/Right to enter.
-
The TV installs and arranges channels according to your country or region. Press Up/Down to select Country/Region, and press OK to enter. Enter the default password 1234 or your own password in case you have changed the password in the (Settings) > System > Parental Controls menu.
Press Up/Down to select your country or region and
press OK to confirm. -
Press Up/Down to select Scan Automatically and press OK to enter.
-
Press Up/Down to select Channel Type and press Left/Right to select Digital, Analog or Digital&Analog.
-
After configuration is completed, press Down to select Search and press OK to start scanning channels.
-
The channel search may take a few minutes. After the automatic search, channels are arranged in a preset order. If you wish to hide or move channels, press on the remote control, select (Settings) > Channels & Inputs > Channels > Channel Organizer and press OK to enter.
Note: If the channel search retrieved only the analog channels it could be caused by poor broadcasting and therefore is not covered by manufacturer warranty. Manufacturers cannot be held responsible for lack of or poor broadcasting in some areas.
-
Using Subtitles
You can enable subtitles for each TV channel. Subtitles are broadcast via
Teletext or DVB-T digital broadcasts.
With digital broadcasts, you have the additional option of selecting a
preferred subtitle language.
Notes:
- Subtitle can also be enabled by pressing button on the remote control to display the virtual remote control keyboard and select Subtitle directly.
- Some options are available only when Subtitle is set to on.
- Press on the remote control, select (Settings) > Channels & Inputs > Channels > Subtitle and
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>