Electrolux LTB1AF28U0 Fridge Freezer User Manual

Electrolux LTB1AF28U0 Fridge Freezer

SAFETY INFORMATION

Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

Children and vulnerable people’s safety

• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
• Children aged from 3 to 8 years are allowed to load and unload the appliance provided that they have been properly instructed.
• This appliance may be used by persons with very extensive and complex disabilities provided that they have been properly instructed.
• Children of less than 3 years of age should be kept away from the appliance unless continuously supervised.
• Children should be supervised to ensure that they do not play with the appliance.
• Children shall not carry out cleaning and user maintenance of the appliance without supervision.
• Keep all packaging away from children and dispose of it appropriately.

General Safety

• This appliance is for storing food and beverages only.
• This appliance is designed for single household domestic use in an indoor environment.
• This appliance may be used in, offices, hotel guest rooms, bed & breakfast guest rooms, farm guest houses, and other similar accommodations where such use does not exceed (average) domestic usage levels.
• To avoid contamination of food respect the following instructions:
  • do not open the door for long periods;
  • clean regularly surfaces that can come in contact with food and accessible drainage systems;
  • store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with or drip onto other food.
• WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
• WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
• WARNING: Do not damage the refrigerant circuit.
• WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
• Do not use water spray and steam to clean the appliance.
• Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects.
• When the appliance is empty for long period, switch it off, defrost, clean, dry, and leave the door open to prevent mold from developing within the appliance.
• Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
• If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre, or similarly qualified persons in order to avoid a hazard.

SAFETY INSTRUCTIONS

Installation

WARNING!
Only a qualified person must install this appliance.

• Remove all the packaging.
• Do not install or use a damaged appliance.
• Follow the installation instructions supplied with the appliance.
• Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear.
• Make sure the air can circulate around the appliance.
• At first installation or after reversing the door wait at least 4 hours before connecting the appliance to the power supply. This is to allow the oil to flow back in the compressor.
• Before carrying out any operations on the appliance (e.g. reversing the door), remove the plug from the power socket.
• Do not install the appliance close to radiators or cookers, ovens or hobs.
• Do not expose the appliance to the rain.
• Do not install the appliance where there is direct sunlight.
• Do not install this appliance in areas that are too humid or too cold.
• When you move the appliance, lift it by the front edge to avoid scratching the floor.

Electrical connection

WARNING!
Risk of fire and electric shock. When positioning the appliance, ensure the supply cord is not trapped or damaged. Do not use multi-plug adapters and extension cables.

• The appliance must be earthed.
• Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply.
• Always use a correctly installed shockproof socket.
• Make sure not to cause damage to the electrical components (e.g. mains plug, mains cable, compressor). Contact the Authorised Service Centre or an electrician to change the electrical components.
• The main cable must stay below the level of the main plug.
• Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.
• Do not pull the main cable to disconnect the appliance. Always pull the mains plug.

Use

WARNING!
Risk of injury, burns, electric shock or fire.

The appliance contains flammable gas, isobutane (R600a), and natural gas with a high level of environmental compatibility. Be careful not to cause damage to the refrigerant circuit containing isobutane.

• Do not change the specification of this appliance.
• Do not put electrical appliances (e.g. ice cream makers) in the appliance unless they are stated applicable by the manufacturer.
• If damage occurs to the refrigerant circuit, make sure that there are no flames and sources of ignition in the room. Ventilate the room.
• Do not let hot items to touch the plastic parts of the appliance.
• Do not put soft drinks in the freezer compartment. This will create pressure on the drink container.
• Do not store flammable gas and liquid in the appliance.
• Do not put flammable products or items that are wet with flammable products in, near or on the appliance.
• Do not touch the compressor or the condenser. They are hot.
• Do not remove or touch items from the freezer compartment if your hands are wet or damp.
• Do not freeze again food that has been thawed.
• Follow the storage instructions on the packaging of frozen food.
• Wrap the food in any food contact material before putting it in the freezer compartment.

Internal lighting

WARNING!
Risk of electric shock.

• This product contains a light source of energy efficiency class G.
• Concerning the lamp(s) inside this product and spare part lamps sold separately: These lamps are intended to withstand extreme physical conditions in household appliances, such as temperature, vibration, humidity, or are intended to signal information about the operational status of the appliance. They are not intended to be used in other applications and are not suitable for household room illumination.

Care and cleaning

WARNING!
Risk of injury or damage to the appliance.

• Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket.
• This appliance contains hydrocarbons in the cooling unit. Only a qualified person must do the maintenance and the recharging of the unit.
• Regularly examine the drain of the appliance and if necessary, clean it. If the drain is blocked, defrosted water collects in the bottom of the appliance.

Service

• To repair the appliance contact the Authorised Service Centre. Use original spare parts only.
• Please note that self-repair or non-professional repair can have safety consequences and might void the guarantee.
• The following spare parts will be available for 7 years after the model has been discontinued: thermostats, temperature sensors, printed circuit boards, light sources, door handles, door hinges, trays, and baskets. Please note that some of these spare parts are only available to professional repairers and that not all spare parts are relevant for all models.
• Door gaskets will be available for 10 years after the model has been discontinued.

Disposal

WARNING!
Risk of injury or suffocation.

• Disconnect the appliance from the main supply.
• Cut off the main cable and discard it.
• Remove the door to prevent children and pets to be closed inside of the appliance.
• The refrigerant circuit and the insulation materials of this appliance are ozone-friendly.
• The insulation foam contains flammable gas. Contact your municipal authority for information on how to discard the appliance correctly.
• Do not cause damage to the part of the cooling unit that is near the heat exchanger.

INSTALLATION

WARNING!
Refer to Safety chapters.

Dimensions

Overall dimensions ¹

H1| mm| 1610
W1| mm| 550
D1| mm| 547

¹ the height, width, and depth of the appliance without the handle

Space required in use ²

H2| mm| 1710
W2| mm| 750
D2| mm| 617

² the height, width, and depth of the appliance including the handle, plus the space necessary for free circulation of the cooling air

Overall space required in use ³

H2| mm| 1710
W3| mm| 750
D3| mm| 1123

³ the height, width, and depth of the appliance including the handle, plus the space necessary for free circulation of the cooling air, plus the space necessary to allow door opening to the minimum angle permitting removal of all internal equipment

Location
This appliance is not intended to be used as a built-in appliance. In case of different installation from freestanding respecting space required in use dimensions, the appliance will function correctly but energy consumption might increase slightly.

To ensure the appliance’s best functionality, you should not install the appliance in a nearby heat source (oven, stoves, radiators, cookers, or hobs) or in a place with direct sunlight. Make sure that air can circulate freely around the back of the cabinet. This appliance should be installed in a dry, well-ventilated indoor position. To ensure the best performance, if the appliance is positioned below an overhanging wall unit, the minimum distance between the top of the cabinet shall be maintained. Ideally, however, the appliance should not be positioned below overhanging wall units. One or more adjustable feet at the base of the cabinet ensure that the appliance stands level.

CAUTION!

• If you position the appliance against the wall, use the back spacers provided or keep the minimum distance indicated in the installation instructions.
• If you install the appliance next to a wall, refer to the installation instructions to understand the minimum distance between the wall and the side of the appliance where door hinges are to provide enough space to open the door when the internal equipment is removed (e.g. when cleaning).

This appliance is intended to be used at ambient temperatures ranging from 10°C to 38°C. The correct operation of the appliance can only be guaranteed within the specified temperature range.

• If you have any doubts regarding where to install the appliance, please turn to the vendor, to our customer service or to the nearest Authorised Service Centre.
• It must be possible to disconnect the appliance from the mains power supply. The plug must therefore be easily accessible after installation.

Electrical connection

• Before plugging in, ensure that the voltage and frequency shown on the rating plate correspond to your domestic power supply.
• The appliance must be earthed. The power supply cable plug is provided with a contact for this purpose. If the domestic power supply socket is not earthed, connect the appliance to a separate earth in compliance with current regulations, consulting a qualified electrician.
• The manufacturer declines all responsibility if the above safety precautions are not observed.
• This appliance complies with the E.E.C. Directives.

Rear spacers
In the bag with the documentation, there are two spacers that must be fitted as shown in the figure. If you position the appliance against a wall in a freestanding installation, install the rear spacers in order to guarantee the maximum possible distance.

Door reversibility

WARNING!
Before carrying out any operations, remove the plug from the power socket. Empty the appliance.

1. Make sure the appliance stands upright.
2. Open both doors and remove the door equipment. Refer to the “Daily Use” chapter. Close the doors.
3. Use a thin-blade screwdriver to remove the screw hole cover (A) and the upper hinge cover (B). Put them aside.
4. Unscrew the screws of the right upper hinge. Support the upper door with your hand. Remove the upper hinge, reverse it, and screw the screws and the pin to it. Put the hinge aside.
5. Carefully lift the upper door from the middle hinge to remove it. Place the upper door on the soft surface. Be careful not to lose washers that may stick to the door.
6. Unscrew the screw (B) and the “stop block” (A) and screw them on the opposite side of the door.
7. Unscrew the screws from the middle hinge. Remove the middle hinge and put it aside together with the screws. Be careful not to lose washers that may stick to the door.
8. Place the lower door on the soft surface.
9. Unscrew the screw (B) and the “stop block” (A) and screw them on the opposite side of the door.
10. Remove the hole covers of the middle hinge and put them in the holes on the opposite side.
11. Tilt the appliance carefully on a soft foam packaging or similar material to avoid any damage to the back of the appliance and the floor.
12. Remove both adjustable feet and unscrew the screws of the lower hinge.
13. Reverse the lower hinge to the other side of the appliance, screw it with screws and install adjustable feet.
14. Install the lower door by placing the bottom door hole on the bottom hinge pin. Tighten the screws.
15. Install the middle hinge to the left side of the appliance by reversing its original position.
16. Fit the upper hole of the lower door on the middle hinge pin. Tighten the screws.
17. Install the upper door by fitting the lower hole of the door on the middle hinge pin.
18. Put the upper hinge to the left top side of the appliance. Supporting the door with your hand put the hinge pin into the upper hole of the upper door. Tighten the screws of the upper hinge.
19. Take out an upper hinge cover (A) from a bag. Install it on the upper hinge. Place the screw hole cover (B) on the top right side of the appliance where the screw holes are.

Install the door equipment. Wait at least 4 hours before connecting the appliance to the power supply.

OPERATION

Control panel

1. Temperature indicator
2. Super Freeze indicator
3. Control button

Switching on
Insert the plug into the wall socket.

Switching off
To turn off the appliance, remove the plug from the power socket.

Temperature regulation
To set the temperature, press the control button repeatedly until you reach the desired temperature.

Recommended set temperature is:

• +4°C for the fridge, The temperature range may vary between 2°C and 8°C for the fridge. Choose the setting keeping in mind that the temperature inside the appliance depends on:
• room temperature,
• frequency of opening the door,
• quantity of food stored,
• appliance location.

The temperature indicators show the set temperature. The set temperature will be reached within 24 hours. After a power failure, it remains stored.

Super Freeze function
The Super Freeze is used to perform pre-freezing and fast freezing in a sequence of the Freezer compartments. This function accelerates the freezing of fresh food and, at the same time, protects foodstuffs already stored from undesirable warming. To freeze fresh food activate the Super Freeze function at least 15 hours before placing the food to complete pre-freezing. To activate the Super Freeze function, press and hold the Control button for 3 seconds. The Super Freeze indicator flashes.

This function stops automatically after 40 hours. You can deactivate the Super Freeze function before its automatic end by pressing and holding the Control button for 3 seconds. The Super Freeze indicator turns off.

DAILY USE

Removing and installing the door shelf

To remove the door shelf:

1. Hold the left side of the shelf.
2. Lift the right side of the shelf until it comes free from the fastener.
3. Lift the left side of the shelf and remove it.

To put the shelf back in:

1. Place the shelf flat on the door.
2. Push two sides of the shelf downwards at the same time so that the shelf fits both fasteners.

Movable shelves
The walls of the refrigerator compartment are equipped with a series of runners so that the shelves can be positioned as desired.

To ensure correct air circulation, do not move the glass shelf above the vegetable drawer.

Vegetable drawer
There is a special drawer in the bottom part of the appliance suitable for the storage of fruits and vegetables.

Temperature indicator
For proper storage of food, the refrigerator is equipped with a temperature indicator. The symbol on the side wall of the appliance indicates the coldest area in the refrigerator. If OK is displayed (A), put fresh food into the area indicated by a symbol, if not (B), wait at least 12 hours and check if it is OK (A). If it is still not OK (B), adjust the setting control to a colder setting.

Freezing fresh food
The freezer compartment is suitable for freezing fresh food and storing frozen and deep-frozen food for a long time. To freeze fresh food activate the Super Freeze function at least 15 hours before placing the food to be frozen in the freezer compartment. Store the fresh food evenly distributed in the freezing compartment. The maximum amount of food that can be frozen without adding other fresh food for 24 hours is specified on the rating plate (a label located inside the appliance).

Storage of frozen food
When activating an appliance for the first time or after a period out of use, before putting the products in the compartment let the appliance run at least 3 hours with the Super Freeze function switched on. Keep the food no closer than 15 mm from the door.

CAUTION!
In the event of accidental defrosting, for example, due to a power failure, if the power has been off for longer than the value shown on rating plate under “rising time”, the defrosted food must be consumed quickly or cooked immediately and then cooled and then re-frozen.

Thawing
Deep-frozen or frozen food, prior to being used, can be thawed in the refrigerator compartment or at room temperature, depending on the time available for this operation. Small pieces may even be cooked still frozen, directly from the freezer: in this case, cooking will take longer.

Ice-cube tray
This appliance is equipped with one or more trays for the production of ice cubes. Do not use metallic instruments to remove the trays from the freezer compartment.

1. Fill the ice-cube trays with water.
2. Put them in the freezer compartment.

HINTS AND TIPS

Hints for energy saving

• Freezer: The internal configuration of the appliance is the one that ensures the most efficient use of energy.
• Fridge: Most efficient use of energy is ensured in the configuration with the drawers in the bottom part of the appliance and shelves evenly distributed. The position of the door bins does not affect energy consumption.
• Do not open the door frequently or leave it open longer than necessary.
• Freezer: The colder the temperature setting, the higher the energy consumption.
• Fridge: Do not set too high a temperature to save energy unless it is required by the characteristics of the food.
• If the ambient temperature is high and the temperature control is set to low temperature and the appliance is fully loaded, the compressor may run continuously, causing frost or ice formation on the evaporator. In this case, set the temperature control toward a higher temperature to allow automatic defrosting and to save energy this way.
• Ensure good ventilation. Do not cover the ventilation grilles or holes.

Hints for freezing

• Activate the Super Freeze function at least 15 hours before placing the food inside the freezer compartment.
• Before freezing wrap and seal fresh food in aluminum foil, plastic film, bags, or airtight containers with lids.
• For more efficient freezing and thawing divide food into small portions.
• It is recommended to put labels and dates on all your frozen food. This will help to identify foods and to know when they should be used before their deterioration.
• The food should be fresh when frozen to preserve good quality. Especially fruits and vegetables should be frozen after the harvest to preserve all of their nutrients.
• Do not freeze bottles or cans with liquids, in particular drinks containing carbon dioxide – they may explode during freezing.
• Do not put hot food in the freezer compartment. Cool it down at room temperature before placing it inside the compartment.
• To avoid an increase in temperature of already frozen food, do not place fresh unfrozen food directly next to it. Place food at room temperature in the part of the freezer compartment where there is no frozen food.
• Do not eat ice cubes, water ices, or ice lollies immediately after taking them out of the freezer. Risk of frostbites.
• Do not re-freeze defrosted food. If the food has defrosted, cook it, cool it down, and then freeze it.

Hints for storage of frozen food

• The freezer compartment is the one marked.
• Higher temperature settings inside the appliance may lead to shorter shelf life.
• The whole freezer compartment is suitable for the storage of frozen food products.
• Leave enough space around the food to allow air to circulate freely.
• For adequate storage refer to the food packaging label to see the shelf life of the food.
• It is important to wrap the food in such a way that prevents water, humidity, or condensation from getting inside.

Shopping tips

After grocery shopping:

• Ensure that the packaging is not damaged – the food could deteriorate. If the package is swollen or wet, it might have not been stored in the optimal conditions and defrosting may have already started.
• To limit the defrosting process buy frozen goods at the end of your grocery shopping and transport them in a thermal and insulated cool bag.
• Place the frozen foods immediately in the freezer after coming back from the shop.
• If food has defrosted even partially, do not re-freeze it. Consume it as soon as possible.
• Respect the expiry date and the storage information on the package.

Shelf life for the freezer compartment

Type of food Shelf life (months)

Bread 3
Fruits (except citrus) 6 – 12
Type of food Shelf life (months)

Vegetables 8 – 10
Leftovers without meat 1 – 2
Dairy food:
Butter 6 – 9

Soft cheese (e.g. mozzarella) 3 – 4

Hard cheese (e.g. parmesan, cheddar) 6

Seafood:
Fatty fish (e.g. salmon, mackerel) 2 – 3

Lean fish (e.g. cod, flounder) 4 – 6

Shrimps 12

Shucked clams and mussels 3 – 4

Cooked fish 1 – 2

Meat:
Poultry 9 – 12

Beef 6 – 12

Pork 4 – 6

Lamb 6 – 9

Sausage 1 – 2

Ham 1 – 2

Leftovers with meat 2 – 3

Hints for fresh food refrigeration

• A good temperature setting that ensures the preservation of fresh food is a temperature less than or equal to + 4°C. Higher temperature settings inside the appliance may lead to a shorter shelf life of food.
• Cover the food with packaging to preserve its freshness and aroma.
• Always use closed containers for liquids and for food, to avoid flavors or odors in the compartment.
• To avoid cross-contamination between cooked and raw food, cover the cooked food and separate it from the raw one.
• It is recommended to defrost the food inside the fridge.
• Do not insert hot food inside the appliance. Make sure it has cooled down at room temperature before inserting it.
• To prevent food waste the new stock of food should always be placed behind the old one.

Hints for food refrigeration

• The fresh food compartment is the one marked (on the rating plate) with
• Meat (all types): wrap in suitable packaging and place it on the glass shelf above the vegetable drawer. Store meat for at most 1-2 days.
• Fruit and vegetables: clean thoroughly (eliminate the soil) and place in a special drawer (vegetable drawer).
• It is advisable not to keep exotic fruits like bananas, mangos, papayas, etc. in the refrigerator.
• Vegetables like tomatoes, potatoes, onions, and garlic should not be kept in the refrigerator.
• Butter and cheese: place in an airtight container or wrap in an aluminum foil or a polythene bag to exclude as much air as possible.
• Bottles: close them with a cap and place them on the door bottle shelf, or (if available) on the bottle rack.

CARE AND CLEANING

WARNING!
Refer to Safety chapters.

Cleaning the interior
Before using the appliance for the first time, the interior and all internal accessories should be washed with lukewarm water and some neutral soap to remove the typical smell of a brand-new product, then dried thoroughly.

CAUTION!

• Do not use detergents, abrasive powders, chlorine or oil-based cleaners as they will damage the finish.
• The accessories and parts of the appliance are not suitable for washing in a dishwasher.

Periodic cleaning
The equipment has to be cleaned regularly:

1. Clean the inside and accessories with lukewarm water and some neutral soap.
2. Regularly check the door seals and wipe them clean to ensure they are clean and free from debris.
3. 3. Rinse and dry thoroughly.

Defrosting of the fridge
Defrosting in the fridge compartment is automatic.

Defrosting of the freezer

CAUTION!
Never use sharp metal tools to scrape off frost from the evaporator as you could damage it. Do not use a mechanical device or any artificial means to speed up the thawing process other than those recommended by the manufacturer. About 12 hours prior to defrosting set a lower temperature in order to build up sufficient chill reserve in case of any interruption in operation.

Defrost the freezer compartment when the frost layer reaches a thickness of about 3-5 mm.

To defrost freezer compartment:

1. Switch off the appliance or pull out the electrical plug from the wall socket.

2. Remove any stored food, wrap it in several layers of newspaper, and put it in a cool place.
   CAUTION!
   A temperature rise of the frozen food packs during defrosting may shorten their safe storage life. Do not touch frozen goods with wet hands. Hands can freeze to the goods.

3. Remove the ice tray.

4. Leave the door open. Protect the floor from the defrosting water e.g. with a cloth or a flat vessel.

5. In order to speed up the defrosting process, place a pot of warm water in the freezer compartment. In addition, remove pieces of ice that break away before defrosting is complete.

6. When defrosting is complete, dry the interior thoroughly.

7. Switch on the appliance and close the door.

8. Set the temperature regulator to obtain the maximum coldness and run the appliance for three hours using this setting.

Only after this time put the food back into the freezer compartment.

Periods of non-operation
When the appliance is not in use for long periods, take the following precautions:

1. Disconnect the appliance from the electricity supply.
2. Remove all food.
3. Defrost the appliance.
4. Clean the appliance and all accessories.
5. Leave the doors open to prevent unpleasant smells.

TROUBLESHOOTING

WARNING!
Refer to Safety chapters.

What to do if…

appliance.
 | The mains plug is not connected to the mains socket correctly.| Connect the mains plug to the mains socket correctly.
 | There is no voltage in the main socket.| Connect a different electrical appliance to the main socket. Contact a qualified electrician.
The appliance is noisy.| The appliance is not supported properly.| Check if the appliance stands stable.
The compressor operates      Temperature is set to incur‐      Refer to “Operation” chap‐ continually.                             recently. ter.
 | Many food products were put in at the same time.| Wait a few hours and then check the temperature again.
 | The room temperature is too high.| Refer to the “Installation” chapter.
 | Food products placed in the appliance were too warm.| Allow food products to cool to room temperature be‐ fore storing.
 | The door is not closed correctly.| Refer to the “Closing the door” section.
Problem| Possible cause| Solution
---|---|---
The Super Freeze function is switched on.| Refer to the “Super Freeze function” section.
The compressor does not      The compressor starts at‐ start immediately after ter a period of time. pressing the “Super

Freeze”, or after changing the temperature.

| This is normal, no error has occurred.
The door is misaligned or inter‐ The appliance is not level‐ feres with ventilation grill.      led.| Refer to installation instructions.
The door does not open easily. You attempted to re-open

the door immediately after closing.

| Wait a few seconds be‐ tween closing and re-opening of the door.
The lamp does not work.| The lamp is in stand-by mode.| Close and open the door.
The lamp is defective.| Contact the nearest Authorized Service Centre.
There is too much frost and ice.| The door is not closed correctly.| Refer to the “Closing the door” section.
The gasket is deformed or dirty.| Refer to the “Closing the door” section.
Food products are not wrapped properly.| Wrap the food products better.
The temperature is set incorrectly.| Refer to the “Operation” chapter.
The appliance is fully loaded and is set to the lowest temperature.| Set a higher temperature. Refer to the “Operation” chapter.
The temperature set in the appliance is too low and the ambient temperature is too high.| Set a higher temperature. Refer to the “Operation” chapter.
Water flows on the rear plate of the refrigerator.| During the automatic de‐ frosting process, the frost melts on the rear plate.| This is correct. Dry the water with a soft cloth.
There is too much-condensed water on the rear wall of the refrigerator.| The door was opened too frequently.| Open the door only when necessary.
The door was not closed completely.| Make sure the door is closed completely.
Stored food did not wrap‐ ped.| Wrap food in suitable packaging before storing it in the appliance.
Problem Possible cause| Solution
---|---
Water flows inside the re‐      Food products prevent the refrigerator. water flowing into the

water collector.

| Make sure that food products do not touch the rear plate.
The water outlet is clogged.| Clean the water outlet.
Water flows on the floor.   The melting water outlet is

not connected to the evaporative tray above the compressor.

| Attach the melting water outlet to the evaporative tray.
Temperature cannot be         The Super Freeze function set. is switched on.| Switch off the Super Freeze function manually, or wait until the function deactivates automatically to set the temperature. Re‐ fer to the “Super Freeze function” section.
The temperature in the ap‐ The temperature is not set appliance is too low/too high. correctly.| Set a higher/lower temperature.
The door is not closed correctly.| Refer to the “Closing the door” section.
The food products’ temperature is too high.| Let the food product’s temperature decrease to room temperature before storage.
Many food products are stored at the same time.| Store fewer food products at the same time.
The thickness of the frost is greater than 4-5 mm.| Defrost the appliance.
The door has been opened often.| Open the door only if necessary.
The Super Freeze function is switched on.| Refer to the “Super Freeze function” section.

If the advice does not lead to the desired result, call the nearest Authorized Service Centre.

Replacing the lamp
The appliance is equipped with a long-life LED interior light. Only service is allowed to replace the lighting device. Contact your Authorised Service Centre.

Closing the door

1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to the “Installation” chapter.
3. If necessary, replace the defective door gaskets. Contact the Authorised Service Centre.

NOISES

TECHNICAL DATA

The technical information is situated in the rating plate on the internal side of the appliance and on the energy label. The QR code on the energy label supplied with the appliance provides a web link to the information related to the performance of the appliance in the EU EPREL database. Keep the energy label for reference together with the user manual and all other documents provided with this appliance.

It is also possible to find the same information in EPREL using the link https://eprel.ec.europa.eu and the model name and product number that you find on the rating plate of the appliance. See the link www.theenergylabel.eu for detailed information about the energy label.

INFORMATION FOR TEST INSTITUTES

Installation and preparation of the appliance for any EcoDesign verification shall be compliant with EN 62552. Ventilation requirements, recess dimensions, and minimum rear clearances shall be as stated in this User Manual in Chapter 3. Please contact the manufacturer for any other further information, including loading plans.

ENVIRONMENTAL CONCERNS

Recycle materials with the symbol. Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.

References

• Electrolux
• Electrolux
• Home | Electrolux Product Registration

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>