PINE64 PineBuds Pro Wireless Earbuds User Manual
- June 3, 2024
- PINE64
Table of Contents
PineBuds Pro
User Manual
Accessories
Earbuds | Eartips |
---|
|
Charging case| USB-A to USB-C charging cable
---|---
|
How to wear
Insert each earbud into your ear and ensure the microphones are pointed toward your mouth. The earbud LED light is facing up.
2.1 Changing Eartips
For the optimal audio and ANC experience, it is recommended to try each of the
different ear tip sizes. The fit should feel light and comfortable in your ear.
The medium ear tips are pre-mounted on the earbuds.
When attaching new ear tips, ensure the oval mounting tip on the earbud is aligned with the oval attachment on the ear tips. Press the eartips firmly onto the ear.
How to charge
Get up to 5 hours on a single charge with ANC. The total charge of up to 20 hours with the charging case.
3.1 Charging the earbuds
Place the earbuds in the charging case and close the lid. It takes up to 1.5
hours to fully recharge the earbuds.
When the charging case is opened, the LEDs on the earbuds will light up red.
LED light dims when the battery is fully charged.
3.2 Low Power Shut Off
When the battery voltage is below 3.2V, the earbuds will turn off.
3. 3 Battery level
Battery status is indicated next to Bluetooth Status on the connected phone.
What the LEDs mean
Earbuds Status
OFF (Red LED flashes 1 time and then off).
ON (Blue LED flashes every 1 second).
Factory reset success (Purple LED blinks)
Charging RED LED lights up.
Full Charged RED LED Dims.
Pairing mode: Left earbud Blue LED flashes
Pairing Success: Left earbud Blue LED goes dark
The charging case has 4 White LEDs flashing indicating charging activity. When charging reaches 100%, all 4 LEDs light up and stop flashing.
How to pair
5.1 Left/ Right mutually connects
Remove earbuds from the case, go to your Smartphone settings and enable
Bluetooth pairing. Look for “PineBuds Pro” and establish the pairing process.
a. During peer pairing mode, the Left earbud LED alternates in Red + Blue
color. The right earbud LED blinks Blue color every 5 seconds.
b. When Peer-pairing is successful, BOTH earbud’s LED blinks Blue every 5
seconds.
5.2 Peer-Connected
Power on the earbuds by removing them from the charging case. Left earbud
LED blinks Blue indicating awaiting pairing with the device.
Once pairing with the phone is successful, LED blinks Blue color every 5 seconds.
5.3 Master/ Slave switching
- Pair earbuds with the phone, then place earbuds in the charging case.
- Then remove any single earbud and becomes Master.
- Insert the Master earbud in the charging case, and remove the Slave earbud, Slave earbud will resume connection with the phone.
5.4 Disconnect from pairing
1. Place earbuds in the charging case.
It will disconnect from the phone. Earbuds enter pairing mode and can be paired with a new device nearby.
If the link loss is less than 5 minutes, earbuds try to reconnect with the phone. If exceeds 5 minutes, the earbuds will turn off.
How to use
6.1 Powering the Earbuds ON/ OFF
To turn ON the earbuds, remove them from the charging case.
If not inside the charging case, press the buttons for 5 seconds.
Blue LED flash 1 sec.
Power ON.
To turn OFF the earbuds, place them inside the charging case.
If not put inside the charging case, press the button for 5 seconds.
Red LED flash 1 sec.
Power OFF.
6.2 Music controls
Left earbud | Function | Right earbud Play/ |
---|---|---|
Pause volume up | Tap the right button twice |
Tap the right button once
Tap the left button once| Volume down|
Press the left button for 1 second| Previous track|
Beeps when reaching maximum volume.
6.3 Call control
Left earbud | Function | Right earbud |
---|---|---|
Tap left or right twice | Answer call | Tap left or right twice |
Press left or right for 1 second | End/Reject call | Press left or right for 1 |
second
Press left or right for 2 second| Mute/unmute microphone| Press left or right
for 2 second
Tap the left or right button twice| Hang-up call| Tap the left or right button
twice
6.4 Advanced ANC
Regular ANC Mode : Offers 25dB of Noise reduction.
Super ANC Mode: Offers 45dB of Noise reduction.
Left button ANC
3 Tap on the left button cycles through ANC modes:
ANC (25dB) On > ANC Off > HearThrough > SuperANC (45dB) On
6.5 HearThrough
HearThrough lets you pay attention to your surroundings when engaging in
conversation, or not on a call, without needing to remove the earbuds. The
microphones pick up surrounding sounds and transmit them to the speakers.
6.6 Mono earbud use
Either earbud can be used individually for mono music playback or for calls.
When used as a mono earbud, the earbud retains its current button
functionality.
To use either earbud as a mono earbud, place it in your ear and place the
other earbud in the charging case. You may need to tap the button on the
earbud to activate mono earbud use.
6.7 Sleep mode
To conserve battery, the earbuds will automatically power off when they are
out of range of your mobile device for more than 5 minutes and are not in the
charging case, or when they have been inactive for more than 5 minutes. To
power, the earbuds on, press the buttons for 5 seconds.
6.8 Reset the earbuds
Resetting the earbuds clears the list of paired devices and resets all
settings.
- Return the Earbuds to the case.
- Press the RESET button in the case for 5 seconds.
- Close the charging case lid to complete the reset —> LED flashes purple.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>