perixx PERIMICE-813 Bluetooth & 2.4G Vertical Multi-Device User Manual
- June 5, 2024
- Perixx
Table of Contents
perixx PERIMICE-813 Bluetooth & 2.4G Vertical Multi-Device
Product Illustraion
Keyboard Indicators
How do you charge PERIBOARD-813?
Mac Bluetooth
- Turn on keyboard
- Please press Fn + C keys for 10 seconds.
- Apple Menu ->System Preferences-> Bluetooth
If the Bluetooth pairing fails, please remove PERIBOARD-813 from the list of paired devices and redo it from Step-1.
Caution
- The manufacturer and re-resellers are not responsible for any technical malfunctions, damage, or personal injury incurred by:
- Any attempt to dismantle, change or modify the product in any manner
- Maltunction or damage is due to misuse or improper alteration or repair
- Malfunction or damage caused by external influence such as falling
- Malfunction or damage is caused by a fire, salt, gas, earthquake, lighthing, wind, water, or other natural calamities, or abnormal voltage.
- Malfunction or damage is caused by other devices connected to the products.
- Malfunction or damage is caused by high temperature, humid, greasy, dusty and hazardous environment.
- You are cautioned that changes or modifications not expressly approved by Perixx Computer GmbH could void your authority to operate the equipment.
- All brand names, trademarks and logos are the properties of their respective owners.
- Please Note: Long-term repetitive use of any keyboard and mouse could cause injury to the user. Perixx recommends users avoid excessive use of this or any keyboard and mouse.
Important Safety Instructions
- Avoid Dropping.
- Do not disassemble.
- This product is suitable for moderate climates only.
- The maximum ambient temperature during use of this product must not exceed 40 degree.
- Open flame sources, such as candles, must not be placed on this product.
- Only use a dry cloth or brush to clean this product.
- Perixx offers a one-year limited warranty with an optional one-year extension.
SPECIFICATION
- Interface: BTS.1
- Size: 42022020mm
- Weight: 636 t 1Og
- Input Current: 3.0-4.2V/10mA
- Material: ABS
- Operating System Requirements: Win 7 or later
- Cable Length: 800mm
- Number of Keys: 106 keys
- Type of Keyboard: Scissor-switch
- Actuation Distance: 1.5 0.2mm
- Total Travel Distance: 1.6 t0.2mm
- Durability: 3 million keypresses
Power and Battery
- Battery Type: USB-C rechargeable Li-Po (200mAH) battery
- Battery Life: Up to 5 days of typical device usage
- Charging Current: < 200mA
- Charging Time: 2 hours
Sleep mode
- Y/N: Yes, after 10 minutes
- How to wake the keyboard: Move or click
Multimedia Keys
Please press “Fn+Fn Lock” before using multimedia keys.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>