BLACK DECKER DCM25N-B5 Coffee Maker or Machine Instruction Manual

: June 5, 2024
: Black Decker

BLACK DECKER DCM25N-B5 Coffee Maker or Machine Instruction Manual

Product Overview

Intended use

Your BLACK+DECKER™ DCM25N-B5 Coffee Maker has been designed for making filter coffee as described in this manual.

This appliance is not intended to be used in:

Staff kitchen areas in shops, offices and other working environments;
Farm houses;
By clients in hotels, motels and other residential type environments;
Bed and breakfast type environments;
Or any other non-household environments.

Safety instructions

Warning! When using mains-powered appliances, basic safety precautions, including the following, should always be followed to reduce the risk of fire, electric shock and personal injury.

The intended use is described in this manual. The use of any accessory or attachment or the performance of any operation with this appliance other than those recommended in this instruction manual may present a risk of personal injury.
Retain this manual for future reference.

Using your appliance

Always take care when using the appliance.
Do not use the appliance outdoors.
Do not operate the appliance if your hands are wet. Do not operate the appliance if you are barefoot.
Guide the power supply cord neatly so it does not hang over the edge of a worktop and cannot be caught accidentally or tripped over.
Never pull the power supply cord to disconnect the plug from the socket. Keep the power supply cord away from heat, oil and sharp edges.
If the power supply cord is damaged during use, disconnect the appliance from the power supply immediately. Do not touch the power supply cord before
disconnecting from the power supply.
Disconnect the appliance from the power supply when not in use and before cleaning.

Safety of others

This appliance is not intended for use by persons (including children) with reduced physical sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.

After use

Switch off, remove the plug from the socket and let the appliance cool down before leaving it unattended and before changing, cleaning or inspecting any parts of the appliance.
When not in use, the appliance should be stored in a dry place. Children should not have access to stored appliances.
The heating element surface is subject to residual heat after use and hence, care should be taken.

Inspection and repairs

Switch off the appliance before cleaning, changing accessories or approaching parts which move in use
Before use, check the appliance for damaged or defective parts. Check for breakage of parts, damage to switches and any other conditions that may affect its operation.
Do not use the appliance if any part is damaged or defective.
Have any damaged or defective parts repaired or replaced by an authorised repair agent.
Before use, check the power supply cord for signs of damage, ageing and wear.
Do not use the appliance if the power supply cord or mains plug is damaged or defective.
If the power supply cord or mains plug is damaged or defective it must be repaired by an authorised repair agent in order to avoid a hazard. Do not cut the power supply cord and do not attempt to repair it yourself.
Never attempt to remove or replace any parts other than those specified in this manual.

Electrical safety

Before use, check that the mains voltage corresponds to the voltage on the rating plate.

This product must be earthed. Always check that the mains voltage corresponds to the voltage on the rating plate.

Appliance plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (Class 1) appliances. Unmodified plugs and matching outlets will reduce the risk of electric shock.

Labels on appliance

The following pictogram is shown on the appliance:

Warning! Hot surface.

Features

Top cover
Hot water outlet
Filter
Funnel
Water tank
Back cover
On switch
Ceramic cup

Extension cables & class 1 product

A 3 core cable must be used as your tool is earthed and of class 1 construction.
Up to 30m (100 ft) can be used without loss of power.
If the supply cord is damaged, it must be replaced by the manufacturer or an authorised Black + Decker Service Centre in order to avoid a hazard.

Mains plug replacement

If a new mains plug needs to be fitted:

Safely dispose of the old plug.
Connect the brown lead to the live terminal of the new plug.
Connect the blue lead to the neutral terminal.
If the product is class I (earthed), connect the green/yellow lead to the earth terminal.

Note: If your product is class II double insulated (only 2 wires in the cord set), no connection is to be made to the earth terminal.

Follow the fitting instructions supplied with good quality plugs.

Any replacement fuse must be of the same rating as the original fuse supplied with the product.

Warning! The above section on mains plug replacement is for authorized service center personals.

Additional safety instructions for coffee makers

Warning! The lid may become hot during use.
Warning! Steam may escape from the unit.

Allow the appliance to cool before fitting or removing any parts and before cleaning.
Do not immerse the appliance in liquid.

Use

Warning! Never use the appliance without water in the reservoir.

Before first use

Unpack the coffee maker and remove all packaging, promotional materials and stickers. Remove all printed documents.
Check that your mains supply is the same as the one indicated on the appliance.
Position the appliance on a flat, stable work surface, away from the edge and other electrical appliances. Ensure that the coffee maker is not positioned under any cupboards or near any furnishings, wallpaper or similar that could be damaged by hot steam.
Wash all removable parts of the appliance in warm, soapy water. Rinse and dry thoroughly with a soft cloth. Do not use harsh/abrasive cleaners or place any part of the appliance in the dishwasher.

Warning! Never immerse the main body of the appliance, cord set or plug in water or any other liquid.

We recommend that you first familiarize yourself with all parts of the appliance before using it for the first time. Do not fill with water or connect to the mains supply when doing this.
To remove any remaining residue from the manufacturing process, we recommend operating the coffee maker as described in the ‘ Use ’ section. This will flush the appliance out. Use water only, do not add coffee.

Note! Ensure that the coffee maker mains cord does not overhang the edge of the worktop.

Note! When the coffee maker is plugged in and operated for the first time, there may be a small amount of smoke and/or odour as the heating elements warm up. This represents no danger or malfunction with the product and should clear after a couple of uses.

Adding coffee

Place the filter in the funnel. Add the desired amount of coffee.
Open the lid.
Rotate the water outlet towards the back of the appliance and place the funnel in the funnel support. Make sure the support clip on the funnel fits securely
over the recess on the right hand side of the funnel support.
Rotate the water outlet back towards the front of the appliance so it is over the coffee in the filter.

Adding water

Using the cup, fill the water tank with the desired quantity of COLD water.

Close the lid.

Note! Do not fill above the MAX mark in the water tank.
Warning! DO NOT open the lid whilst the coffee maker is on. Hot water may be ejected

Switching on

To switch the appliance on, press the Power button.
The unit will automatically turn off once brewing is complete
In order to prevent the machine from drying up, the machine will automatically power off after 7 minutes of power on; if you want to continue using the machine, you need to press the switch again.

Brewing coffee

Add coffee as described.
Add water as described.
Close the lid
Place the cup onto the stand.
Switch the appliance on. (The indicator light on the right side of the appliance will come on).

Note! This product does not have an anti drip nozzle. Switch the appliance off and wait for the coffee to stop flowing before removing the cup.

Cleaning and maintenance

Warning! Before cleaning and maintenance, switch the appliance off and remove the plug from the socket.

Remove the filter and the funnel from the funnel holder support. Remove the used coffee grounds from the filter.
Remove the water outlet by pulling it upwards.
Wash the cup, water outlet filter holder and the filter in hot, soapy water. Rinse then dry all parts thoroughly then re-fit refit them.
Wipe the outside of the appliance with a damp cloth.

De-scaling the appliance

If the appliance is used in an area with hard water, it is advised to de-scale the appliance when from time to time.

se a commercial de-scaling agent for coffee makers, or use water and white vinegar as follows:
Fill the water tank and add 3 teaspoons of vinegar. Operate the appliance as for making coffee until the reservoir is empty.
Discard the used water and repeat the procedure 2 or 3 times with fresh water.

Protecting the environment

Separate collection. This product must not be disposed of with normal household waste.

Should you find one day that your BLACK+DECKER product needs replacement, or if it is of no further use to you, do not dispose of it with other household waste. Make this product available for separate collection.

BLACK+DECKER provides a facility for recycling BLACK+DECKER products once they have reached the end of their working life. This service is provided free of charge. To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf.
You can check the location of your nearest authorised repair agent by contacting your local BLACK+DECKER office at the address indicated in this manual. Alternatively, a list of authorized BLACK+DECKER repair agents and full details of our after-sales service and contact are available on the Internet at: www.2helpU.com

Technical data

DCM25N-B5

Voltage| 220 – 240 Volts (50-60 Hz)
Power| 300-350W

Warranty

BLACK+DECKER is confident of the quality of its products and offers an outstanding warranty.

This warranty statement is in addition to and in no way prejudices your statutory rights.

If a BLACK+DECKER product becomes defective due to faulty materials, workmanship or lack of conformity, within 24 months from the date of purchase, BLACK+DECKER warranty to replace defective parts, repair products subjected to fair wear and tear or replace such products to ensure minimum inconvenience to the customer unless:

The product has been used for trade, professional or hire purposes;
The product has been subjected to misuse or neglect;
The product has sustained damage through foreign objects, substances or accidents;
Repairs have been attempted by persons other than authorised repair agents or BLACK+DECKER service staff.

To claim on the warranty, you will need to submit proof of purchase to the seller or an authorised repair agent. You can check the location of your nearest authorised repair agent by contacting your local BLACK+DECKER office at the address indicated in this manual.

Alternatively, a list of authorised BLACK+DECKER repair agents and full details of our after-sales service and contacts are available on the Internet at: www.2helpU.com.

BLACK AND DECKER (OVERSEAS) GMBH (DUBAI BRANCH)
PO Box 17164, Dubai, United Arab Emirates