OSALIS 13821 Adjustable SAD Lamp With Remote Control Instructions
- June 5, 2024
- OSALIS
Table of Contents
OSALIS 13821 Adjustable SAD Lamp With Remote Control Instructions
INSTRUCTIONS
- Plug the power cord in the input port on the back of your lamp.
- Switch the lamp on by either pressing the power button on the remote control or the back of the device.
- To set the timer, press the timer button before selecting your desired time. (10, 20, 30 or 60 mins)
- To adjust brightness, press to decrease or to increase. Alternatively, select low, medium, or high brightness.
- Use the buttons to select the colour temperature.
- To switch off the lamp, simply press the power button and unplug the power cord before storing your lamp away.
WARNINGS AND PRECAUTIONS
- Do not use with a power supply voltage other than 100-240 VAC.
- Do not operate device near water, flammable or combustible vapours, such as aerosol spray products, or where oxygen is being administered.
- Avoid placing in areas that are exposed to direct sunlight or close to heat radiating products such as heaters.
- Child supervision is recommended. This lamp contains small parts which could pose a choking hazard.
- Do not shorten or cut the power cord.
- Use with caution if you experience light sensitivity or have a pre-existing eye condition. Discontinue use if you experience discomfort. Certain medications (e.g. anti-depressants) may induce light sensitivity which can result in discomfort or hyperactivity.
Consult with your healthcare provider before use.
Savantini Ltd.,
Savantini House, Foster Street,
Kingston-Upon-Hull, HU8 8BT
+44(0) 1482 496931
www.stressnomore.co.uk
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>