VONYX CMS Series CMS400 Studio Set/Condenser Microphone Instruction Manual
- June 5, 2024
- VONYX
Table of Contents
CMS Series CMS400 Studio Set/Condenser Microphone
Instruction Manual
Ref. nr.: 173.503, 173.504
Congratulations on the purchase of this Vonyx product. Please read this manual thoroughly prior to using the product in order to benefit fully from all features. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid fire and/or electrical shock. Keep the manual for future reference.
UNPACKING INSTRUCTION
CAUTION! Immediately upon receiving the product, carefully unpack the carton,
check the contents to ensure that all parts are present, and have been
received in good condition. Notify the shipper immediately and retain the
packing material for inspection if any parts appear damaged from shipping or
the package itself shows signs of mishandling. Save the package and all
packing materials. In the event that the product must be returned to the
factory, it is important that the product be returned in the original
factory box and packing.
MICROPHONE INPUT EXAMPLES
PC
Connect the microphone to a computer or laptop by inserting the 3.5mm jack
into the microphone socket.
MIXER
Connect the microphone to a mixer by inserting the XLR male cable into an XLR-
or combo jack line/microphone input.
STAND ASSEMBLY INSTRUCTIONS
- Install the base of the stand onto, for example, a tabletop.
- Attach the suspension arm link to the base stand.
- Tighten the nut once your preferred suspension arm direction has been determined.
- Attach the arm to the suspension arm link.
- Attach the shock mount to the suspension arm. Use the adapter of the microphone holder to enable mounting of the shock mount (picture right).
- Adjust the height of the arm to your preferred height.
- Put the microphone into the clamp ring of the shock mount.
- Optional: attach the pop filter to the stand to eliminate popping and sibilance sound.
SPECIFICATIONS
CMS400
Ref. nr.| 173.503| 173.504
Frequency response| 20Hz-20KHz
Sensitivity| -37dB (+/-2dB) / 1KHz
Impedance| 200 Ohm
Mic. Power supply| Phantom 12~48VDC
Weight| 1.5kg
Specifications and design are subject to change without prior notice.
www.tronios.com
Copyright © 2022 by Tronios The Netherlands
Documents / Resources
|
VONYX CMS Series CMS400 Studio Set/Condenser
Microphone
[pdf] Instruction Manual
CMS Series, CMS400, Studio Set Microphone, Studio Condenser Microphone
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>