TINYMONSTER 20072 LED Decoder Harness Owner’s Manual
- June 5, 2024
- TINYMONSTER
Table of Contents
20072 LED Decoder Harness
Owner’s Manual
IDENTIFY INSTALLATION TYPE
EXTERNALLY WIRED
The bulb can be accessed from the back of the housing without removing any caps or covers. The wiring for the bulb is visible and accessible outside of the housing.
INTERNALLY WIRED INSIDE COVER
To access the bulb a dust cap (generally plastic) must first be removed. Inside the bulb housing, there is wiring going to the bulb with plenty of space inside of the housing to fit the decoder harness.
INTERNALLY WIRED OUTSIDE COVER
To access the bulb a dust cap (generally plastic) must first be removed. Inside the bulb housing, there is wiring going to the bulb, but there is not enough space inside of the housing to fit the decoder harness.
Externally Wired
STEP 1
Simply connect the decoder plugs to the LED bulb and the factory bulb harness.
STEP 2
Secure the metal control box of the decoder harness with the mounting tape or
cable tie provided. Any existing holes for fasteners inside the engine bay may
also be used.
Internally Wired Inside Dust Cover
STEP 1
Remove the dust cover from the bulb housing.
STEP 2
Connect the decoder plugs to the LED bulb and the factory bulb
harness.
STEP 3
Secure the decoder harness to the inside of the bulb housing. To optimize the
heat dissipation of the LED bulb, try to secure the decoder control box away
from the LED bulb and the LED driver to avoid excess heat accumulation.
Reinstall the dust cover.
Internally Wired Outside Dust Cover
STEP 1
Remove the dust cover from the bulb housing. Drill a 1″ hole in the center of
the dust cover. Use the rubber grommet on the decoder harness wiring loom to
seal the hole. STEP 2
Connect the decoder plugs to the LED bulb and the factory bulb harness.
Reinstall the dust cover.
STEP 3
Secure the metal control box of the decoder harness with the mounting tape or
cable tie provided. Any existing holes inside the engine bay may also be used.
Our Tiny Monster bulbs pack scary power in slim, sleek designs. They’re
compact and powerful and packed with the latest LED technology.
| POWER | 6.5W @ 13.5V DC |
|---|---|
| CURRENT | 0.5A @ 13.5V DC |
| VOLTAGE | 9 – 16V DC |
| WATERPROOF | IP67 |
O MORE ERRORS OR FLICKERING.
Tiny Monster decoder harnesses do it all! They’re designed to handle both
CANbus and PWM systems used in the newest vehicles. Our decoders provide a
plug & play solution to any LED bulb and fog light conversion.
Our decoder harnesses have been tested for compatibility in any Dodge,
Chrysler, Jeep, VW, BMW, Audi, or Mercedes-Benz system, as well as any other
CANbus system currently in use.
THANK YOU!
Thank you for purchasing ARC Lighting products. Read this instruction manual
thoroughly for proper use of the product. After completing your installation,
please keep this manual for future reference.
For additional product information and resources please visit www.arclighting
/user-guide
PARTS
WARRANTY
Terms of this Warranty
ARC Lighting warranties all products from defects in material and workmanship
for (2) two years from the retail date of purchase. This warranty applies only
to the original purchaser and is nontransferable. Your original sales receipt
will serve as proof of purchase for this warranty. Before credit can be issued
on a warranty claim, proof of defect may be required. This can be determined
at the time of the claim.
Exclusions of this Warranty
Not covered under this warranty is failure due to neglect, improper
installation including any modifications, alterations, abuse, accident,
weather-related damage, or any type of impact.
Repair and Replacement
In the event that your part is found to be defective under the terms of this
warranty, it is at the discretion of ARC Lighting to repair or replace the
defective part. All repairs must be made under the direction of ARC Lighting.
ARC Lighting is not responsible for any removal, installation, reinstallation,
or transportation costs associated with the warranted claim.
Please submit any warranty claim at
www.arc.lighting/warranty. It only takes
a few minutes to complete and streamlines the process.
ARC LIGHTING888-608-2220
WWW.ARC.LIGHTING
03208
Documents / Resources
|
TINYMONSTER 20072 LED Decoder
Harness
[pdf] Owner's Manual
20072, LED Decoder Harness, 20072 LED Decoder Harness, Decoder Harness,
Harness
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>