Shenzhen Qianhai Qijin Network Technology T12 Pro Wireless Earbuds User Manual

Shenzhen Qianhai Qijin Network Technology T12 Pro Wireless Earbuds

Thank you for purchasing our Bluetooth earbuds T12 Pro. Please review this manual thoroughly before operating your device

Package Content

1. T12 Pro Wireless earbuds -1 Set
2. Charging case -1 Set
3. USB cable -1 pcs
4. User manual -1 pcs

Product Diagram

How to wear

Please place the earbuds into the cochlea gently, and adjust them to a suitable angle.

Power on

• Method 1: Both earbuds powered on ana will be connected to each other automatically as Soon as the charging case is opened. Take Out both earbuds, the master earbud will be flashing red and blue LED lights alternatively. (By default factory setting, the left earbud is the master earbud.)
• Method 2: If your charging case is running out of battery, or earbuds are not in the case. Long press the multifunctional button on both earbuds for about 2 seconds to power them on. The master earbud will be flashing red and blue LED Flight alternatively. (By default factory setting, the left earbud is the master earbud).

Pairing

Use Method 1 or 2 to pair up the device if you are using it for the first time. Turn on the] earbuds and the Bluetooth function on your electronic device, search and choose “T12 Pro”. When it shows connected” it means it is connected successfully. After connecting it for] the first time, the earbuds will automatically]Connect with the device the next time you turn them on. The earbuds will recognize the latest device it is connected to. If the latest device is] not nearby, the earbuds will turn into a searching mode (red and blue light flashing alternatively)

Notice

1. Pairing mode Will only last for mins at most,m the earbuds will power off after that if they are not paired. You need to redo the previous steps again to connect the earbuds with your electronic devices.
2. The connection will be lost if the earbuds are] out of the range of the electronic device. It will be reconnected if both devices are within the detectable range in 5 minutes.

Power off

• Method 1: Simply just put the earbuds back into the charging case and close it, then the] earbuds will be powered off automatically. (The earbuds will not power off automatically if the charging case is out of battery)
• Method 2: Long press the multifunctional button for 5 seconds, the red light flashes three times, and the earbuds are powered off. ( Note: If the earbud is left unpaired for 5 minutes, the earbud will automatically turn off )
• Answer a call: Press the multifunctional button once to answer a call
• Ending a call: Press the multifunctional button once to end a call.
• Rejecting a call: Double-click either side of the left and right ears and refuse tO answer when calling.
• Call switching mode: During the call, double-click either side of the left and right earbuds to switch between the two calls.
• One-Key Siri: Under standby or music playing mode double-tap the multifunctional button to activate Siri. (This feature is only available for OS system devices)

Music playing

1. Play/Pause: Press the multifunctional button to start or pause the music.
2. Previous song: Press the left earbud for 2 seconds to go back to the previous song.
3. Next song: Press the right earbud for 2 seconds for the next song. (In mono mode press any one of the] earbud for 2 seconds for the next song.)
4. Mono mode: only can skip to the next song.
5. Auto Play: Once you finished your phone call, the music will be back on automatically.

Wireless Charging Supported

We recommend you use a wireless charging pad (not included)

Charging the earbuds

• When the earbuds are on low battery, there is] a voice prompt to remind you to put the earbuds back into the case for charging.
• The red light is on when the earbuds are charging. The red light will turn off when the earbuds are fully charged.

Mono Mode

1. For mono mode, make sure only one earbud is turned on before connecting to an electronic device
2. When connecting to a known device, turn on the earbud by pressing the multifunctional button for 2 seconds and It will reconnect to the device automatically.
3. When playing music in mono mode, the multifunctional Dutton only allowS you to SWitch to the next song
4. When connecting to a new device, press the multifunctional button for about 5 seconds to enter pairing mode, then select “connect in the Bluetooth setting.

Reset Setting

• When the earbuds is in the charging case press and hold the charging case for 5 seconds, the digital screen lights up for 2 seconds, then the earbuds are reset.

Active-Standby Mode

1. The earbud can work independently; you do not need to connect both earbuds with your mobile phone to get them to work. If you are m using one earbud and would like to connect another earbud, simply just take the remaining earbud out of the case.
2. When the master earbud (default left) is out of battery or is not placed in the charging case, the right earbud will change to the master earbud.

Technical Solution

If you have issues pairing the earbuds with your electronic devices, please try the following steps:

First: Make sure the earbuds are fully charged, are powered on, are not paired with other devices, and the mobile phone Bluetooth function is enabled and is on, within the range of distance between the earbuds and your mobile phone. If the above steps do not solve the problem, please try to reset it. When the earbuds is not paired with the device, first, hold down the earbuds for 5 seconds to power off, then hold down the left and right\ earbuds for 10 seconds at the same time to reset the earbuds and clear the pairing with the phone, and finally, hold down the earbuds for 5 seconds to start up, and the earbuds can be paired with the new device.

Product Specification

• Model: T12 Pro
• Earbuds size: 45.617.618.5mm
• Charging case size: 602649mm
• Transmission distance: 10 meters
• Input voltage: DC 5V
• Earbuds battery capacity: 3.7V/45mAh
• Charging case battery capacity: 3.7V/400mAh
• Working time: 8 hours
• Charging case charging time: About 1.5 hours
• IOS battery status: Support

Safety Criterion

1. Please follow the instruction of the user manual and do not disassemble or modify the device otherwise it may cause the earbuds to fail to work, or burnt.
2. Do not drop or wash the product in any iquid.
3. Do not use adapters with current/voltage exceeding the limit TA/5V to charge the case] or the battery will be damaged.
4. Do not put the equipment under too high or too low temperature ( Below u C or above 45C)
5. Do not block the charging pin, LED indicator, and microphone.
6. Do not use the earbuds Over time and over- Volume, or it will make yOu teel dizzy or damage your hearing. (. Do not use the devices under thunderstorm environment. A thunderstorm may cause abnormal operation of the devices, signal interruption, etc.

FCC STATEMENT

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are] designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference WIll not OCCur in a particular installation. If this] equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment oft and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is Connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions:

1. this device may not cause harmful interference.
2. this device must accept any interference received, including interference that may cause undesired operation.

FCC ID: 2A7CM-T12

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>