Jabra Connect 4s Bluetooth Speakerphone User Manual
- June 3, 2024
- Jabra
Table of Contents
Jabra Connect 4s Bluetooth Speakerphone
Welcome
Thank you for purchasing the Jabra Connect 4s. We hope you will enjoy it!
JABRA CONNECT 4S FEATURES
- Answer, end, reject and mute calls.
- Connect to computer via USB or Jabra Link 370.
- Connect wirelessly to mobile device via Bluetooth.
- Portable design.
- Omni-directional microphone.
- Wideband audio for exceptional sound quality.
- LED, audio indicators and voice guidance.
- Up to 15 hours talk time.
- Interact with your voice assistant (phone dependent) or speed dial with the one-touch Smart button* (must be enabled in Jabra Direct).
Speaker overview
Turn on the jabra Connect 4s
- Plug the Jabra Connect 4s USB cable into any available USB port on your computer, or
- Press and hold (2 secs) the On/Off button to turn the Jabra Connect 4s on or off.
Charging the Jabra Connect 4s
Plug the Jabra Connect 4s USB cable into any available USB port on your computer to charge the battery. The battery light is red when charging, and green for 1 minute when fully charged.
Connecting
- Plug the Jabra Connect 4s USB cable into any available USB port on your computer.
- Select the Jabra Connect 4s as the default audio device in Windows Control Panel sound settings, and in your softphone audio settings.
Connect to mobile device (Bluetooth)
- Press and hold (2 secs) the Bluetooth button on the Jabra Connect 4s until the Bluetooth light flashes blue. Release the button when you hear the connection instructions.
- Enable Bluetooth on your mobile device, and select the Jabra Connect 4s from the list of available Bluetooth devices. If prompted for a password enter 0000.
Connect to Bluetooth headset
For privacy, a bluetooth headset can be connected to the Jabra Connect 4s.
- Plug the Jabra Connect 4s into any available USB port on your computer.
- Put the Bluetooth headset into pairing mode (refer to your headset manual for instructions).
- Press and hold (8 secs) the Bluetooth button on the Jabra Connect 4s until the Bluetooth light flashes blue and then flashes green. Release the button when you hear ‘Connect to headset’.
- The connection is established when the light turns solid blue.
How to use the Jabra Connect 4s
|
On/Off
| Press and hold (2 secs) the On/Off button until the lights flash
---|---|---
| Answer call| Tap the Answer call button
| End call| Tap the End/reject call
button
Reject call| Tap the End/reject call
button
|
Speaker volume
| Tap the Volume up or
Volume down button
|
Battery status
| Tap the Battery status button to display the current battery level
| Connect with new Bluetooth device| Press and hold (2 secs) the Bluetooth
button to connect with a new Bluetooth device
---|---|---
Reconnect/ disconnect with Bluetooth device| Tap the Bluetooth button to
reconnect/disconnect with a Bluetooth device
| Mute microphone| Tap the Mute microphone
button
| Voice assistant (off by default, Smartphone dependent)| Press the Smart
button (use Jabra Direct to enable voice assistants, e.g. Siri, Google
Assistant, Cortana)
Speed dial
(off by default, computer or Smartphone dependent)
|
Press the Smart button (use Jabra Direct to enable speed dial)
Multiple call handling
The Jabra Connect 4s can accept and handle multiple calls simultaneously.
| Put current call on hold and answer incoming call|
Tap the Answer call button
---|---|---
Switch between held call and active call|
Tap the Answer call button
| Reject incoming call| Tap the End/reject call
button
Switch between bluetooth devices
- Press and hold the Bluetooth button and tap the Volume up or Volume down button to cycle between the connected devices. The connected devices will be announced.
- Release the Bluetooth button when the correct device is announced. The Jabra Connect 4s will establish a connection with the device(s). When a connection has been established the device(s) will be announced.
Voice guidance on/off
To turn voice guidance on/off, press and hold
(8 secs) the Mute button until you hear ‘Voice guidance off’ or ‘Voice
guidance on’.
NOTE: Not all voice prompts will be disabled when voice guidance is
turned off.
Smart button
The Smart button is off by default.
To use the Smart button to activate your smartphone’s voice assistant (e.g.
Siri, Google Assistant, Cortana) or to speed dial a phone number on your
smartphone or computer, install Jabra Direct on your computer and enable the
Smart button in the Connect 4s settings.
Software
Jabra direct
Jabra Direct is software designed to support, manage and enable optimal
functionality for Jabra devices. It is highly recommended to download and
install Jabra Direct.
Download the latest version – jabra.com/direct
Update Jabra Connect 4s firmware
Firmware updates improve performance or add new functionality to Jabra
devices.
To update firmware:
- Connect to a computer via USB.
- Download and install Jabra Direct.
- Check for the latest firmware via Jabra Direct. You will receive notifications whenever there is an update for your device.
Support
FAQ
View the FAQs on Jabra.com/connect4s.
How to care for your Jabra Connect 4s
-
Always store the Jabra Connect 4s with the power off and safely protected.
-
Avoid storage at extreme temperatures
(above 70°C/158°F or below -20°C/-4°F). This can shorten battery life and may affect operation. High temperatures may also degrade performance. -
Do not expose the Jabra Connect 4s to rain or other liquids.
References
- Portable speakerphone delivering powerful sound and crystal-clear work calls | Jabra Connect 4s
- Jabra Direct - Engineered to optimize and personalize your headset
- [FAQTitle] | Jabra Connect 4s - USB-A | FAQ | Jabra Support
- How do I set a preferred softphone in Jabra Direct? | Jabra Connect 4s - USB-A | FAQ | Jabra Support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>