M LTMIRROR M3099-6090 LED Lighted Oval Vanity Bathroom Makeup Mirrors Instruction Manual
- June 5, 2024
- M LTMIRROR
Table of Contents
M LTMIRROR M3099-6090 LED Lighted Oval Vanity Bathroom Makeup Mirrors
INSTRUCTION
This is a high quality product and must be installed and maintained as per
these instructions or it may invalidate the Warranty.
To installer: Please leave this manual with the user/householder when
finished.
WARNING:
When using electrical appliances, comply with basic safety precautions in
order to reduce the risk of fire, electric shocks and personal injury.
GENERAL INSTRUCTIONS
No-one, and in particular no child, must be in the vicinity of the workplace.
Check that the electrical specitications of this mirror light are compatible
with your installation.
WARNING
The power supply must be switched off before installation or maintenance.
Remove The fuse or de-activate it, and make sure that it cannot be
reactivated.
The mirror light must be installed by a qualified electrician in accordance
with the wiring standards in force in the country where the installation takes
place.
This electrical product complies with the safety standards in force. Repairs
must only be carried out by qualified technicians using original spare parts.
Any failure to follow these instructions can be particularly dangerous to
users and will invalidate the Warranty.
Installation Instructions
-
Fix the screw(s) on the wall where the mirror is to be placed.
Screw fastenings should be made in concrete or other solid structure, or in structures that have been tested and apprOved for fastenings. Before diling a hole, make sure that there is no risk of drlling through an existing non- visible cable or pipe; and make sure that the hole position for the expansion screw fit’s the mirror and the hanging direction. -
Isolate the power supply by means of the electrical system main switch.
-
Connect the electricity supply to the mains cable (110 V-), making sure that the conductors match (mains brown and neutral blue).
-
Carefully attach the mirror to the wall, making sure the mirror hanging properly and level.
-
Restore the power supply.
-
Switch on the mirror light. YOur mirror light is noW ready to Work.
Short Touch ON/OFF
Long Touch – Dimming
The demister starts working when switching on the mirror light.
Cleaning and Maintenance
Clean regularly and wipe off excess moisture by using a dry cloth only.
Installation and maintenance must only be carried out by a Qualified
Electrician.
Installation
HOW TO USE?
For the LED Light:
-
Press on the touch switch for a short time to control the light on or of.
(Note: The defogging is turned on or off with mirror light) -
After the light is turned on, press the touch switch for a long time to adjust the brightness of the light.
-
Stop whenever you think the brightness is OK for you.
For Bluetooth Music
- Turn on the power.
- Open your phone Bluetooth search for ‘mirror multimedia, select and connection.
- Then you can play any music within your phone/pad.
NOTE: Bluetooth is connectable to one device only. If you want to connect the second device, please foget the first device.
PARAMETERS
S 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
S15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
FCC Rules.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>