Shenzhen Zherui Technology E6 4 In 1 Wireless Charger User Manual
- June 5, 2024
- Shenzhen Zherui Technology
Table of Contents
Shenzhen Zherui Technology E6 4 In 1 Wireless Charger User Manual
For safe and efficient charging, use the included 18W quick charge adapter. Otherwise, the charger may not charge three devices simultaneously or get damaged in the long run. For 15W wireless charging phones, you must switch to a 24W quick charge adapter.
Product Introduction
- Charge your iPhone, iWatch, and Airpods at the same time
- Save space by using only one cord and charging stand
- Compatible with most popular iPhones, iWatches and Airpods
- Breathing ring light indicator for charging can be turned on/off
- Built-in watch charger supports charging iWatch directly
- Integrated with fast and safe charging technology
How to use
- Connect the charger, 18W adapter, and USB-C cable
- Plug the adapter into the power socket (AC 120-240V 60Hz, Residential Voltage)
- The charger will be in standby mode while connected to the power source. 4. Put your devices in the corresponding places to charge. Make sure the alignment is accurate and precise.
Wireless charging uses magnetic induction to charge your device. Don’t place anything between your device and the charger, which might reduce performance or damage magnetic strips or RFID chips like those found in some credit cards, security badges, passports, and key fobs.
Compatibility & Average Charging Power
| Compatible with | Power |
|---|
iPhone 13/mini/Pro/Pro Max,12/mini/Pro/Pro Max, iPhone 11/Pro/Pro Max iPhone
SE(2gen), iPhone XS/Max, iPhone X, iPhone 8/Plus| 7.5W
iWatch 7,6, SE, 5, 4, 3, 2 (1 gen not supported)| 2.5W
Airpods Pro,3,2, 1 (remove any protective case before charging)| 3W
Other Qi-charging enabled phones:
Galaxy S: 20 5G, 20+ 5G, 20 Ultra 5G, 10, 10+, 10e, 9, 9+, 8, 8+, 7, 7 edge, 6
5-15W 6 edge, 6 edge+ Galaxy Note: 20, 20 Ultra 5G, 10, We, 10+, 9, 8, 7, 6,
5;| 5-15W
Actual compatible device models may change with time. Please contact us for confirmation.
Specifications
Input: 9V/2A, 9V/2.7A or 12V/2A
Input Interface: Type-C port
Transmission Distance: <8mm
Conversion Rate: >73%
Product Size: 136x101x136 mm
Troubleshooting
It may save you time to first troubleshoot issues by following the instructions below before filing a warranty claim. And we apologize in advance for whatever inconvenience your purchase may have caused.
- 1. Phones/watches/earphones must be compatible with this wireless charger (Refer to Compatibility in this leaflet).
- 2. Use the included power adapter and cable. Make sure they work and are well connected.
- 3. Align the devices precisely and make sure they stay close to the charger. Take the devices away and then try realigning if necessary.
- 4. Avoid certain protective cases that are too thick(5mm), magnetic, metallic, battery-containing, with-grip, with-popsocket, etc.
- 5. Better use it below 28°C. For protection phones and watches will stop wireless charging when the temperature goes high.
- 6. Upgrade your phone’s or watch’s OS and software to the latest version and then restart it to avoid charging glitches.
- 7. Indicator light flashing blue and green indicates an error (try realigning devices and ensure no foreign object is on the charger).
- 8. Clean the light switch surface with dry cloth when you feel the light difficult to turn on/off.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
FCC warning:
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>