Kmart 43286782 DIY Macrame Wall Decor Tutorials Instruction Manual
- June 17, 2024
- Kmart
Table of Contents
Kmart 43286782 DIY Macrame Wall Decor Tutorials
GUIDE IMAGE
Kit Includes
- 2 x bamboo rings
- 3 x macrame cords
- 1 x instruction sheet
Cut The Cords
- White:
- 55cm x 10pcs
- 50cm x 14pcs
- 45cm x 10pcs
- 40cm x 8pcs
- Black:
- 55cm x 15pcs
- 50cm x 12pcs
INSTALLATION
- Place a 40cm white cord underneath the left side of the bamboo ring.
- Tie a DHH knot at each end on each side of the ring, ensuring the cord is taut.
- Continue tying all 42 white cords to the ring. Working from short (40cm) cords to long (55cm) cords as shown.
- Turn the ring so the white cords are horizontal and tie the first black cord to the ring with DHH knots. The black cord should sit behind the white cords as shown. Continue adding the black cords and threading them through the white cords to match the pattern shown. Then space out the black cords into 3 cords per section as shown.
- Trim the cord ends to around 3.5cm. To complete the ring, brush the loose ends with a comb to create a fringed edge.
Cut The Cords
- White:
- 55cm x 22pcs
- 50cm x 12pcs
- Light brown:
- 55cm x 18pcs
- 50cm x 8pcs
- Place a 40cm white cord underneath the left side of the bamboo ring.
- Tie a DHH knot at each end on each side of the ring, ensuring the cord is taut.
- Continue tying all 34 white cords to the ring. Working from short (50cm) cords to long (55cm) cords as shown.
- Turn the ring so the white cords are horizontal. Thread the first light brown cord through the white cords as shown and tie it to the ring with DHH knots. Continue adding the light brown cords and threading them through the white cords to match the pattern shown.
- Trim the cord ends to around 3.5cm. To complete the ring, brush the loose ends with a comb to create a fringed edge.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>