Shenzhen Xiaoyi Iot Technology 1200M-ZJQ-2 WiFi Repeater User Guide
- June 5, 2024
- Shenzhen Xiaoyi Iot Technology
Table of Contents
Shenzhen Xiaoyi Iot Technology 1200M-ZJQ-2 WiFi RepeaterShenzhen Xiaoyi
Iot Technology 1200M-ZJQ-2 WiFi Repeater
INSTRUCTIONS
When the machine enters the power on state, the signal indicator light is on,
use the mobile phone or computer WiFi to search and connect wifi-fly2.4g & 5g-
xxxx, click the connection, and the initial password 12345678 will
automatically jump to the setting page (if the jump interface does not appear,
you need to return to the WiFi connection again. If this operation is still
invalid, you can manually enter the website 192.168.59.1 in the browser),
After entering the administrator login interface, select the language for the
next operation. The next step in relay mode is as shown in the figure. Select
the superior network WiFi to be extended and enter the password 
After expansion, the name and password can be modified. Continue to the next
step until the display configuration is successful. Return to the mobile phone
or computer and select WiFi connection after expansion to surf the Internet,
or connect the computer to surf the Internet directly through LAN port network
cable 
After entering the administrator login interface, select the language for the
next operation. The next step in AP mode is shown in the figure. The name and
password can be modified. Continue to the next step until the display
configuration is successful. Return to the mobile phone or computer and select
the extended WiFi connection to surf the Internet 
FCC WARNING
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not Occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio-tv technician for help.
This equipment complies with FcC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with a minimum distance 20cm
between the radiator & your body.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.