BLACK DECKER BXCO850E Espresso Coffee Machine User Manual

: June 3, 2024
: Black Decker

Table of Contents

BLACK DECKER BXCO850E Espresso Coffee Machine
SAFETY ADVICE AND WARNINGS
- SERVICE
DESCRIPTION
- INSTRUCTIONS FOR USE
USE
WARRANTY AND TECHNICAL
- ASSISTANCE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BLACK DECKER BXCO850E Espresso Coffee Machine

BLACK-DECKER-BXCO850E-Espresso-Coffee-Machine-PRODUCT-
IMAGE

SAFETY ADVICE AND WARNINGS

Read these instructions carefully before switching on the appliance and keep them for future reference. Failure to follow and observe these instructions could lead to an acci-dent.
This appliance is only for domestic use, not for industrial or professional use. It is not intended to be used by guests in hospitality environments such as bed and breakfast, hotels, motels, and other types of residential environments, even in farm houses, areas of the kitchen staff in shops, offices and other work environments.
Clean all the parts of the product that will be in contact with food, as indicated in the cleaning section, before use.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of appliance in a Safeway and understand the hazards involved.
Cleaning and user maintenance shall not be made by children unless they are older than 8 and super-vised.
Keep the appliance and its cord out of reach of children aged less than 8 years.
This appliance is not a toy. Children should be supervised to ensure that they do not play with the appliance.
Never submerge the appliance in water or any other liquid or place it under running water.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similar qualified person in order to avoid a hazard.
CAUTION: Heating element surface is subjected to residual heat after use.
Ensure that the voltage indicated on the rating label matches the mains voltage before plugging in the appliance.
Connect the appliance to a base with an earth socket withstanding a minimum of 10 amperes.
The appliance’s plug must fit into the mains socket properly. Do not alter the plug. Do not use plug adaptors.
Do not force the power cord. Never use the power cord to lift up, carry or unplug the appliance.
Do not wrap the power cord around the appliance.
Do not clip or crease the power cord.
Do not allow the power cord to come into contact with the appliance’s hot surfaces.
Check the state of the power cord. Damaged or tangled cables increase the risk of electric shock.
Do not touch the plug with wet hands.
Do not use the appliance if the cable or plug is damaged. If any of the appliance casings breaks, immediately disconnect the appliance from the mains to prevent the possibility of an electric shock.
Do not use the appliance if it has fallen on the floor, if there are visible signs of damage or if it has a leak. Do not place the appliance on hot surfaces, such as cooking plates, gas burners, ovens or similar.
The appliance must be used and placed on a flat, stable surface.
The appliance is not suitable for outdoor use.
Do not use the appliance in the case of persons insensitive to heat (the appliance has heated surfaces).
Do not touch the heated parts of the appliance, as it may cause serious burns.

USE AND CARE:

Do not use the appliance if its accessories are not properly fitted.
Do not switch the appliance on without water.
Do not use the appliance if the on/off switch does not work.
Do not move the appliance while in use.
Respect the MAX and MIN levels.
Disconnect the appliance from the mains when not in use and before undertaking any cleaning task.
Unplug the appliance from the mains before refilling the water tank.
Store this appliance out of reach of children and/or persons with reduced physical, sensory or mental capabilities or lack of experience or knowledge.
Do not store the appliance if it is still hot.
Only use water with the appliance.
The use of bottled mineral water adapted for human consumption is recommended.
Never leave the appliance connected and unattended if is not in use. This saves energy and prolongs the life of the appliance.
Do not remove the filter holder when coffee is being made, as at that time it is under pressure.

SERVICE

Any misuse or failure to follow the instructions for use renders the guarantee and the manufacturer’s liability null and void.

DESCRIPTION

A Supply cable
B Water tank
C Water Tank Lid
D Hot plate for warming cups
E Touch control panel
F ON/OFF Button
G1 One Coffee Button
G2 Two Coffee Button
H Steam heating Button
I Steamer pipe
J Filter holder
K Measuring spoon
L Ground coffee filter (1 cup)
M Ground coffee filter (2 cups)
N Drip tray level
O Drip tray
P Tray grill
R Steam knob

INSTRUCTIONS FOR USE

BEFORE USE:

Make sure that all the product’s packaging has been removed.
Before using this product for the first time, it is advisable to test it only with water.
Before using the product for the first time, clean the parts that will come into contact with food in the manner described in the cleaning section.
Before connecting the machine, check that the steam control (R) is closed by turning clockwise.

Priming the circuit:

This simple operation ensures optimum dispensing and must be carried out:
When first starting:
When the machine has been out of use for a long time (1 or 2 weeks)
After making steam
When the tank has run out of water.
Fill the receptacle taking care to observe the MAX level
Connect the appliance to the mains.
Press the on/off button (F) Power indicator is illuminated.
The indicators of 1 cup of coffee, 2 cup of coffee and steam flash, the machine begins heating, after all indicators are solidly on, the preheating is completed
Without fitting the filter holder (or with the filter holder fitted, but without coffee), place a recipient under the steam pipe (I)
Open the steam knob (R) by turning counterclockwise
Press the G2 Coffee Button.
Water will exit through the steam pipe. Wait until approximately one cupful has exited
First time you will use the machine, there is no water on the boiler, so it could be possible you need to repeat this operation before getting water
To finish serving, as quantity of liquid is programmed, it will stops automatically, but you always can stop when desired. To do it, push again over coffee button to stop and close the steam knob (R) by turning clockwise
This will complete the priming operation.

Filling with water:

The tank must be filled with water before turning the appliance on.
Remove the water tank.
Fill the tank taking care to observe the MAX level
Replace the tank in its housing, ensuring that it is well fitted.

Filling of coffee:

Remove the filter holder.
Position the ground chosen coffee filter (L or M) in the filter holder
We recommend using natural toast coffee, as using roasted coffee may affect the operation of the machine.
Fill the removable filter with ground coffee (6 to 7 gr per cup to be prepared).
If you wish to make 1 coffee, use 1 filter coffee (L), fill the ladle (1 spoonful) and take the capacity of the measuring spoon as the measure for one coffee.
For 2 coffees, use 2 cups filter (M), and put in 2 spoonful’s.
Next lightly press down the ground coffee with the back of the spoon.
Fit the filter holder in the appliance once more.
Position the filter holder in the coffee assembly by inserting the assembly from below to inserting position and turning it from left to right until it locks.

USE

Making Espresso

Before connecting the machine, check that steam control(R) is closed, turning clockwise.
Connect the appliance to the mains.
Turn the appliance ON pushing the on/off button(F).
The indicators of 1 cup of coffee, 2 cup of coffee and steam flash, the machine begins preheating. After all indicators are solidly on. It means right temperature is reached.
Place one or two preheated cups at the filter holder outlet.
Press the coffee Button (G1 or G2). The coffee infusion will begin to exit.
The coffee will stop automatically when reached the standard quantity.

To Customize the volume of coffee

Press and hold 1cup button for 3 seconds, 1cup button flashes, entering setting mode, press 1cup button again to start dispensing coffee, when the specified time is reached, press 1 cup button to complete setting which can be memorized by the unit. You can do same for 2 cups button.
Once serving has finished, wait a few seconds and remove the cups with the coffee.
Remove the filter holder and empty the grounds from it.
Wash the filter holder with running water and dry it well. C
heck that the removable filter is perfectly fitted into the filter holder.
Fit the filter holder in the appliance once more.

Getting hot water:

Put the device in ON situation, pressing the button ON/OFF (F).
The indicators of 1 cup of coffee, 2 cup of coffee and steam flash, the machine begins preheating. After all indicators are solidly on, the preheating is completed. This situation indicates that the water has reached the temperature.
Place a container under the nozzle (I).
Open the steam control (R), by turning counterclockwise.
Press one of coffee outlet button (G1G2).
Please refer to the operation described in the section of “Making Espresso” when need to adjust the working time for making hot water.
The hot water began to come out of the vaporizer.
Once obtained the desired amount of hot water, press the coffee outlet button (G1 or G2) again, which stops the pump.
Close The steam knob (R) by turning, clockwise.

Obtaining steam:

The steam is used to foam milk for cappuccino, and also to heat other liquids.
Turn the appliance on using the on/off button.
The indicators of 1cup coffee button, 2cup coffee button and steam button flash, the machine begins preheating, after all indicators are solidly on, the right temperature is reached.
For Steam, press the Steam heating button (H), with Steam icon flashing, and continue heating until the steam temperature has been reached.
The Steam light will illuminate steady, indicating that the water has reached the necessary temperature for generating steam.
Note: During operation, the indicator in the steam selector will cycle on and off to maintain to desired temperature.
Place a recipient under the steam tube.
Open Steam knob (R) anticlockwise
Steam only will begin to exit.
When you have enough, close the steam knob (R) by turning clockwise and remove the recipient.

IMPORTANT

When you finish doing steam, you must replace the water used to make steam and at the same time, recover the temperature (lower) to make coffee.
To do this, with the steam knob open, pushing previously over Steam Icon to stop heating, push coffee / water button (G1 or G2), which will activate the pump.
Put a container under the tube
When water starts to flow through the steam pipe, it means that it has recovered the coffee temperature and the boiler has been filled. Now you can close Steam knob and to push coffee button (G) to Stop position

Auto off feature:

The BLACK+DECKER machines are designed to save energy
To that end, after some minutes from the last operation, the unit switches to energy saving mode
To return to normal operation you should just Switch ON the connect button (F)

Once you have finished using the appliance:

Turn the appliance off, using the on/off switch (F) for a few seconds
Unplug the appliance to the mains.
Remove the water from the water tank.
Clean the appliance

CLEANING

Basic cleaning

Disconnect the appliance from the mains and let it cool before undertaking any cleaning task.
Clean the equipment with a damp cloth with a few drops of washing-up liquid and then dry.
Do not use solvents, or products with an acid or base pH such as bleach, or abrasive products, for cleaning the appliance.
Do not let water or any other liquid get into the air vents to avoid damage to the inner parts of the appliance.
No parts of this appliance are suitable for cleaning in the dishwasher.
After washing, dry all the parts before fitting them together and storing.

Cleaning the Frothing Wand

CAUTION! The frothing wand, and frothing sleeve may be VERY HOT.
It is recommended to purge and wipe the frothing wand after steaming milk to prevent deposits of dirt and before turning off the machine.
To do this, pull the frothing sleeve down and clean under warm running water.
Fill a cup with a bit of water, immerse the frothing wand into the water.
Drain hot water through the pipe, following the instructions “Obtaining hot water”.
Use a cloth to dry the frothing wand and replace the frothing sleeve.
In case no steam comes out of the frothing wand, hardened milk blocks its path. Carefully use a needle to loosen the milk residue from the opening of the frothing tip to remove any blockage, Once clean, rinse with running water from the tap and reassemble it. Then steam again.

How to deal with lime scale incrustations:

For the appliance to work correctly it should be kept free of lime scale or magnesium incrustations caused by the use of hard water.
To prevent this kind of problem, we recommend the use of water with low lime or magnesium mineralization.
However, if it is not possible to use the kind of water recommended above, you should periodically remove the lime scale from the appliance:
Every 6 weeks if the water is “very hard”.
Every 12 weeks if the water is “hard”.
To do so, we recommend the use of a specific Decal product for this kind of machine which can be found in specialized shops and authorized technical services.
Homemade solutions are not recommended in the descaling of this appliance, such as the use of vinegar.

ANOMALIES AND REPAIR

Take the appliance to an authorized technical support service if problems arise. Do not try to dismantle or repair without assistance, as this may be dangerous.
If you detect any anomalies, refer to the following table:
Anomaly| Possible cause| Solutions
---|---|---
Water flows out of the side of the holder| The filter holder is not fitted correctly. The Edge of the sieve is covered coffee.

The brewing set is dirty.

| see Section “filling coffee”.
Clean the sieve around the edge and clean the brewing of coffee set Clean With a damp cloth.
No coffee comes out| There is no water.

The water tank is not properly placed.

The filter holes are clogged, the coffee is ground too fine or has been pressed too much .

| Fill the water tank.

Make sure the tank is properly seated. Empty the filter basket and clean with water. Clean the brewing unit with a damp cloth. Fill the sieve again and press the coffee slightly.

The coffee comes out slowly or drop by drop| The coffee grinding is too fine or too

pressed.

| Make sure grinding is OK and it’s not too pressed.
The coffee comes without cream| The used Coffee is out of date. The Coffee has not been pressed enough.

The Ground coffee is too coarse.

| Use Fresh coffee and once opened store in an airtight container.

Press slightly the coffee.

Grind finer the coffee.

The coffee comes out too fast| The ground coffee is too coarse. There is not enough coffee in the sieve.

The Coffee has not been pressed enough.

| Grind coffee finer.

Ensure that it’s the right amount of coffee in the sieve.

Press slightly the coffee.

No steam escapes from the evaporator tube| The Tube is clogged.| Clean the steam tube with a damp cloth to remove any traces of milk have dried and unblock holes using a needle. Press the corresponding switch and remove “hot water” until it goes out continuously.

For EU product versions and/or in the case that it is requested in your

country:

Ecology and recyclability of the product

The materials of which the packaging of this appliance consists are included in a collection, classification and recycling system. Should you wish to dispose of them, use the appropriate public containers for each type of material.
The product does not contain concentrations of substances that could be considered harmful to the environment.

This symbol means that in case you wish to dispose of the product once its working life has ended, take it to an authorized waste agent for the selective collection of waste electrical and electronic equipment (WEEE).

This appliance complies with Directive 2014/35/EU on Low Voltage, Directive 2014/30/EU on Electromagnetic Compatibility, Directive 2011/65/EU on the restrictions of the use of certain hazardous substances in electrical and electronic equipment and Directive 2009/125/EC on the eco-design requirements for energy related products.

WARRANTY AND TECHNICAL

ASSISTANCE

This product enjoys the recognition and protection of the legal guarantee in accordance with current legislation. To enforce your rights or interests you must go to any of our official technical assistance services.
You can find the closest one by accessing the following web link: http://www.2helpu.com/.
You can also request related information, by contacting us (see the last page of the manual).
You can download this instruction manual and its updates at http://www.2helpu.com/.