SGPRO SG-13 Wireless Microphone User Manual

SGPRO SG-13 Wireless Microphone

Main Features

This wireless microphone system is ideal for portable use. The metal handheld microphone(s) and the receiver is compact and made with durable materials. The microphone is comfortable to hold. The receiver has a display screen for showing status. It is easy to use and suitable for many occasions such as outdoor singing & talking, indoor karaoke, live broadcasting, etc. Carefully adjusted, the system has great sensitivity and frequency response range.

• Frequency Range 902.8-926.8MHz
• Transmitter Display Indicates Frequency, Battery 5tatus, Mute 5tatus.
• Simple Operation with Few Function Buttons Avoid Malfunction Caused by Misoperation.
• Transmitter Voltage Detection: the battery icon will flash when the voltage drops to 2.2V.
• Ideal Working Distance: Within 196 Feet (60 meters) in open space.

Product Introduction

Handheld Microphone

1. Mic Capsule

2. LED Screen Shows handheld power, signal, frequency and etc.

3. Power Switch
   Short press to boot up, long press to shut down. Short press to mute when power on, long press(S seconds) to switch channels when power off

4. SET Button

5. UP/DOWN Button: Press to change frequency.

6. Battery Slot: For 2 Pieces 。f 1.SV AA Battery

LED Screen

1. Power
   shows the battery power level

2. Frequency
   shows the current frequency

3. Channel
   shows the current channel (CHA or CHB)

4. Mute Status
   shows the mute status

Bodypack Microphone

1. Mini Gooseneck Microphone
2. Headset Microphone
3. Mini XLR Input Socket
4. Volume Knob
5. ON/MUTE/OFF, push the switch to middle to mute
6. Power Indicator
7. Antenna
8. LCD Screen
9. 1D Pair/ Channel Switch, long press for ID pair, short press for channel switch
10. Battery Slot: For 2 pieces of 1.SV AA battery
11. Battery Cover

Bodypack LCD Screen

1. shows the current Channel and Frequency Set
2. shows the frequency in use
3. showsbattery level, flashes when it’S low power
4. shows mute status

Receiver

1. 6.35 mm Audio Output Plug

2. RF A/B Led Light
   RF led light flashes in red when charging and stop flashing once fully charged

3. Power Button
   Short press to turn on and long press for three seconds to turn off

4. Signal Antenna

5. Charging Socket
   DC SV micro USB type C style

Operations

Handheld ID Pairing (Sync)

1. Setting Microphone ID PAI RI NG Mode: Turn On the microphone, Long-Press the SET button for 10 seconds till
   the screen indicates

2. Setting Receiver ID PAIRING Mode: Turn Off the receiver, then Long-Press the POWER button for 10 seconds till the LED light flashes Red and Green.

3. Pairing: Wait until the receiver’s LED light changes to Steady Green. Click the receiver’s’POWER’and the microphone’s ‘SET’ button to exit pairing mode to complete the pairing process.

Bodypack ID Pairing (Sync)

1. Setting Microphone ID PAI RI NG Mode: Turn On the microphone, Long-Press the’CH’button for 10 seconds till the screen indicates flashing’SYNC’ and’- – –‘.
2. Setting Receiver ID PAIRING Mode: Turn Off the receiver, then Long-Press the’POWER’button for 10 seconds till the LED light flashes Red and Green.
3. Pairing: Wait until the receiver’s LED light changes to Steady Green. Click the receiver’s’POWER’and the microphone’s ‘CH’button to exit pairing mode to complete the pairing process.

Important Note

If the two microphones are in the same CHANNEL (for example, Channel A), follow the below instructions to change one transmitter to Channel B:

Handheld Microphone:
Turn Off the microphone first, then Long-Press the’POWER’ button for 10 seconds till’CHA’ changes to’CHB’. Then repeat step (D to@ of 3.11D PAI RI NG (SYNC) to pair.

Bodypack Microphone:
Turn Off the microphone first. Press the ‘CH’ button and don’t loose, then turn on the microphone. Then repeat step (D to@ of 3.1 ID PAIRING (SYNC) to pair.

Choosing Frequency

Click frequency adjusting button (CH+/CH-) on the transmitter to change frequency. Do use different frequency when using 2 or more microphones in one occasion.

Mute Function

HANDHELD:
While using the microphone system, click the power button to Mute the microphone (transmitter). The screen indicates ‘- – – -‘ when the Mic is in Mute status. Click again to un-mute.

BODYPACK:
Please refer to 2.3 Bodypack Microphone. The power switch is also the mute switch: push the switch to mid-way between On and Off, then Mute is on.

Connection

Parameter

Specifications

Receiver

• Modulation Type: DQPSK
• Dynamic Range: >90dB
• Signal/Noise Ratio: >B0dB
• Total Harmonic Distortion: <0. 3% Carrier Frequency: UHF
• Electric Current: 250mA±l0mA Voltage: 3. 7V Li-ion Battery Frequency Response: 40Hz-20KHz±3dB Audio Output Level: 400mV±20mV Ideal Distance: 196 Feet (60 Meters)

Transmitter

• Microphone Type: Dynamic
• Polar Pattern: Hand held is Cardioid, bodypack is condenser Harmonic Suppression: 54dBc
• Harmonic Distortion: <0. 3%
• Carrier Frequency: UHF
• Electric Current: 130mA±l0mA
• Voltage: 2 X 1. SV AA Battery

Help Us Help You

We value every customer’s feedback. Your feedbacks help us better support you and keep making great products. Scan the QR code to visit our store on Amazon. Your reviews are appreciated. Should there be any question, please leave us a message and we will get back to you in 24 hours.

email: support@sgproaudio.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>